User's Manual

Use up and down arrows to
navigate to the view cam
option.
To view a camera in use press
camera button from the touch
menu.
Press (select) to enter the
view cam menu.
The screen will zoom in one level-
toward the center of the screen.
Press zoom out and the
screen will zoom out to full view.
We at Summer Infant stand behind all of our products. If you are not completely satisfied or
have any questions, please contact our customer service department at
1-800-268-6237 or [e-mail]
(For Europe call [phone] or [e-mail])
Summer Infant, Inc. Monitor Warranty Policy
Summer Infant, Inc. will repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the unit is
defective in workmanship or materials. To claim your repair/replacement, the product must be returned to Summer Infant along with a
copy of the original purchase receipt. In the absence of the purchase receipt, the warranty will be 12 months from the date of
manufacture. This warranty does not apply to normal wear or damage from misuse, abuse, improper storage and handling,
installation, accident, unauthorized repair or alteration. Please contact our Customer Service Department by phone at 1-800-268-6237
or via e-mail at [e-mail] for details.
If you experience a problem that is not noted in this manual, please do not return the product to the
store. Our Customer Service Department may have a simple solution to your problem. Please contact us
at 1-800-268-6237 or email us at [e-mail].
Summer Infant Europe, LTD.
Office Suite 6, Second Floor
Bournehall House, Bournehall Road
Bushey, Hertfordshire WD23 3HP UK
[phone]
Summer Infant, Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-800-268-6237
© 2010 Summer Infant, Inc.
Colors and styles may vary.
Please retain information for future
reference.
MADE IN CHINA.
8/10
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Changes or modifications not expressly approved by Summer Infant may void the users authority to operate this
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiver
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
CAUTION: 1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained
between the antenna of this device and all persons. 2. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Brightness Control
Level 1
o
G
o
d
b
y
e
Power
ON
OFF
h
e
l
l
o
power on
INSTRUCTION MANUAL
Please read the following instructions and warnings carefully.
Keep this instruction manual for future reference.
02000
WARNING:
Adult assembly required. Keep small parts
away from children when assembling
.
CAUTION:
KEEP SMALL PARTS OUT
OF CHILD’s REACH
.
Pan/Scan
Zoom
Volume Control
digital color video monitor
Tools required:
screwdriver (not included)
For technical support
see back page.
For use with children
from birth and up.
View Camera
Camera Options
Once camera is synced
it will turn black
BATTERY WARNING:
• Use only the original rechargeable batteries
provided. Please contact Summer Infant, Inc. for
replacement batteries. Contact information can be
found on page 12 of these instructions or on the
battery itself.
• Do not mix old and new batteries.
• Do not mix alkaline, standard,
or rechargeable batteries.
• Batteries are to be inserted with correct polarity.
• Clean battery and product contacts prior to
battery installation.
• Do not short-circuit supply terminals.
• Only the recommended batteries or equivalent are
to be used, volts and size.
• Remove batteries when product is stored for long
periods of time or when batteries are exhausted.
• Dispose of exhausted batteries properly.
• Do not recharge non-rechargeable batteries.
• Rechargeable batteries are only to be charged
under adult supervision.
• Keep all batteries away from children.
WARNING:
THIS PRODUCT CANNOT REPLACE RESPONSIBLE
ADULT SUPERVISION.
• Prevent cord entanglement – do not place Camera in crib
or within arm’s reach of the baby. Use enclosed Security Clips to help
secure cords away from baby’s reach.
Never use extension cords with AC adapters. Only use
the AC Adapters provided.
• When an AC Adapter is plugged into an electrical outlet,
do not touch the exposed end.
• Test monitor before first use, periodically, and when changing location
of the Camera.
• Do not use monitor near water (such as bathtub, sink, etc.).
• Keep monitor away from heat sources (such as stoves, radiators, etc.).
• Make sure there is proper ventilation around all monitor components.
Do not place on sofas, cushions, beds, etc. which may block
ventilation.
• Nursery monitors use public airwaves to transmit signals. This monitor
may pick up signals from other monitors or similar devices and signals
broadcast by this monitor may
be picked up by other receivers.
• This product is not a toy. Do not allow children to play with it.
• This product contains small parts. Adult assembly required.
Exercise care when unpacking and assembling the product.
• A/V Cable: To view video through your TV, plug the AV cable jack
connection into monitor and connect the other ends into the
corresponding color coded parts on your TV. Scroll through A/V
inputs on your television’s menu until monitor picture is visible.
Note: The Monitor’s power button must be turned ON and CAM
pre-selected before connecting the AV cable. Once the AV cable is
connected the Monitor’s controls cannot be activated.
For best results
use on a 27” TV or smaller.
•
Belt Clip: For convenience and portability, you can clip the Monitor to
your belt or waistband after a battery has been installed.
• Footrest: The Monitor has a built-in footrest for tabletop convenience.
Simply flip out footrest and place the Monitor on a stable, level surface
Set Up & Use
Battery Installation
A
C
D
E
B
CAMERA
Table Top or Wall Mounting:
Determine a location for the
Camera that will provide
the best view of your baby in his crib. Place the
Camera on
a flat surface, such as a dresser, bureau, or shelf. Or mount
the
Camera on a wall. Be sure not to place camera in crib or within
arm’s reach of baby. Do not place the Camera near open
windows, direct sunlight or heat sources. Be sure to test
reception and Camera positioning before mounting to a wall
(see "Testing Your Initial Set Up" section).
To Wall Mount:
1) Pre-drill a hole in the wall
(3/16", 4.8mm, drill bit) (Figure A).
2) Insert the wall anchor (included)
into the hole and with a hammer,
tap gently on the end until the wall
anchor is flush with the wall.
3) Insert the screw (included) into the
wall anchor and tighten screw until
only 1/4" (6.2mm) of the screw
is exposed.
4) Insert AC Adapter into the Camera’s
AC Adapter Jack.
5) Slide the back of the
Camera down
onto the screw until the
Camera is secure to the wall.
6) Plug the AC Adapter into a standard electrical outlet.
7) Secure the cord to the wall using the 6 Security Clips
included to keep cord away from baby's reach (Figure B).
8) Slide switch on side of
Camera to ON and the
POWER ON LED will illuminate solid green.
MONITOR
To Use in Video and Audio Mode:
Step 1: Place the Monitor in the room from which you want to monitor
your baby (ie. bedroom or living room). Plug an AC Adapter into the AC
Adapter Jack and the other end into a standard electrical outlet.
top of the unit.
Step 2: Press and hold “POWER ” button for 4 seconds to turn on
until video or Summer logo appears on screen.
Step 3: For audio and no video, press the VIDEO ON/OFF button on
top of the unit.
Step 4: To turn the monitor off completely, press and hold the
“POWER ” button for 3 seconds.
• Video Sleep Mode: While operating on battery power, the video
screen will go to sleep, to conserve battery power. Audio and
sound lights will function normally. Press the Video On/Off to resume
viewing. This option is NOT available when using AC adapter.
• Sound Lights: The 4 Sound Lights will illuminate on the Monitor
depending on the level of your baby’s sounds. For example, if your
child is just cooing, only one or two lights will illuminate. If your baby
is crying, several will illuminate, depending on how loud she is
crying. This feature is particularly helpful if you are in a noisy room.
• Quick View/Video On/Off Button: This button turns the video
mode on. If you only want to hear your baby, press the Quick
View/Video On/Off Button again to shut off the video. The Quick
View/Video On/Off Button is ideal for easily turning on the video
option in the middle of the night.
• Night Vision: In a darkened room, the Monitor will automatically
use its infrared LED’s to transmit a clear image of baby, so you can
see your child at night!
• Multi-Position Camera/Microphone: The Camera/Microphone
should be positioned so it is facing baby as much as possible. This
multi-position feature is unique to Summer Infant nursery monitors. It
allows the microphone to focus on baby’s voice while filtering out
other household noises.
• Position the Monitor closer to the CAMERA if necessary.
• Move Monitor away from other monitors, cordless phones,
walkie-talkies, etc.; moving even slightly could greatly improve reception.
• If you hear a feedback or squealing noise, move the CAMERA and the
Monitor further away from each other.
Tips For Improving Reception:
Special Features:
Synching Monitor and CAMERA:
The Monitor and Camera are synched at the factory for privacy
reasons. If the Monitor and Camera arenot synching with each other
for any reason, please sync them as described below.
Step 1: Move the Monitor to the same area as the
Camera. With both the Camera and Monitor on, press the “POWER”
button once to call up the OPTION menu. Press the Volume Button to
select channels (CAM 1, 2, 3, 4).
Step 2: Press and hold the Video On/Off button for 2 seconds until
the Power LED flashes amber and within 20 seconds, press the
“CODE” button once at the back of the camera.
Step 3: You should then see a picture from the Camera on the
Monitor.
Step 4: If this is unsuccessful, you should repeat steps above making
sure the Camera and Monitor are close enough to each other for
synching.
E
D
C
To test reception you will need two adults. One adult should view the
picture on the Monitor while the other is in the nursery to adjust the
Camera. Often the quality of the reception can be improved by
slightly repositioning the Camera, Monitor, or both. It may help to
place a stuffed animal or doll in the crib to simulate the position and
size of your baby. Adjust the picture quality on the Monitor as
needed by using the Brightness Adjustment on the front of the
Monitor.
To test sound quality, have one adult speak in both a normal tone
and a whisper near the crib. Adjust volume on the Monitor’s
Volume Adjustment as needed.
Testing Your Initial Setup:
Be sure to test your Monitor’s reception before initial use.
We also recommend testing your Monitor’s reception periodically. Please
keep in mind that the Slim & Secure™ Handheld Color Video Monitor will
not provide the same level of picture quality as your television with
cable, satellite dish, or digital service.
To test reception you will need two adults. One adult should view the
picture on the Monitor while the other is in the nursery to adjust the
Camera. Often the quality of the reception can be improved by slightly
repositioning the Camera, Monitor, or both. It may help to place a stuffed
animal or doll in the crib to simulate the position and size of your baby.
Adjust the picture quality on the Monitor as needed by using the
Brightness Adjustment on the front of the Monitor.
To test sound quality, have one adult speak in both a normal tone and a
whisper near the crib. Adjust volume on the Monitor’s Volume
Adjustment as needed.
To Use the Video Monitor in Portable Mode:
For use in portable mode, the Monitor requires 1 3.7V LITHIUM-ION
rechargeable battery (included).
Tips:
• Before using Monitor in portable mode (battery), be sure to
charge battery 12-16 hours.
• To charge battery, plug the larger AC Adapter into the
Monitor’s AC Adapter Jack. Plug the other end into a standard
electrical outlet.
• After initial 12-16 hour charge, to achieve optimal battery life,
charge battery overnight and unplug all day during use.
• Note: Only charge battery when low indicator light comes on.
Constant recharging of your battery before low battery indicator
light comes on will decrease the life of your batteries.
• When battery is low, the Power On LED will illuminate amber,
indicating that the battery needs to be recharged.
• To conserve battery power, use AC Adapter whenever possible.
Remove battery during long periods of non-use.
• If battery is exhausted, remove immediately from the Monitor.
• Properly dispose of exhausted battery.
Monitor: This step is only needed if replacing battery.
1. Locate the battery compartment door on back of monitor.
2. Slide open battery door and insert battery. Ensure correct connection.
Slide battery door back in place.
Portable Camera Battery Pack:
Set Up & Use
1. Locate the battery compartment door on bottom of camera battery
pack.
2. Use Phllips Head Screwdriver to remove battery door.
3. Insert 4’AA’ batteries (not included). Ensure correct connection.
4. Place battery door back and screw closed.
5. Place camera ontop of battery pack. Twist camera clockwise untill the
arrow from the camera are aligned with the “lock” arrow on battery
pack.
6. Turn camera to “ON” position. Note: Camera battery pack will supply
portable power for upto 10 hours. Rechargeable batteries are
recommended.
7. To remove camera from battery pack, twist camera counterclockwise
untill the arrow from the camera are aligned with the “UNLOCK” arrow
on the battery pack.
Adding Additional Camera:
Note: This product can accept up to four cameras. To order an
additional camera (#02830), please contact our Customer
Service Department by phone at 1-800-268-6237 or via e-mail at
[e-mail] for details. (For Europe Call
[phone] or [e-mail])
• Plug the AC adapter into AC jack in the bottom of the CAMERA and
the other end into a standard wall outlet.
• Slide Switch on side of CAMERA to ON and POWER ON LED will
illuminate solid green.
Menu Selection:
• Turn on camera and receiver and Press “POWER ” button on Parent
Unit to enter the OPTION menu for CAM selection.
• Press volume button to select empty channel (CAM 2, 3, 4).
• ADD CAMERA - Press and hold the Video On/Off button for 2 seconds
until the Power LED flashes amber and within 20 seconds, press the
“CODE” button once at the back of the camera. The image from the
new camera should appear on the screen within 1 second.
Please bring the camera and receiver close to each other during the
process, to make sure the RF signal is strong enough and to prevent
failure caused by interference.
Camera Scanning:
The monitor is designed with a scanning feature that will allow
parents to scan up to 4 cameras with each scan duration of about
8 seconds.
Step 1: Make sure additional cameras are synched and turned
on. See “Adding Additional Camera’s” section on page 5 (above).
Step 2: To activate the SCAN feature, call up the OPTION menu
by pressing the “POWER ” button on the monitor. Scroll selection
to “SCN” and confirm selection by pressing the “POWER ” button
once.
Step 3: The monitor will scan all active cameras and image will
appear on the screen for about 8 seconds.
Step 4: To exit scanning and to view a particular camera, press the
“POWER ” button once.
Step 5: To resume scanning, repeat Step 2.
Level 5 Level 6
Level 2 Level 3
cam 1
cam 1
Power
Talk Back
Volume Control
Video On/Off
Camera
Options
Zoom
+ and -
Home
Remote Camera Pan
Left and Right
Brightness
To adjust
volume
press the
“+” or “ - ”
button
Menu appears
after pressing
button
Features & Components:
Monitor
Charging Stand:
AC Adapter: (2)
Security Clips
(six)
Wall Anchor
(one)
Screw (one)
Power & Low Battery LED
(Light will illuminate amber
when battery is low)
Sound
Lights
Volume
Control
Battery Strength
Icon
Brightness
Control
Speaker
Quick View/
Video On/Off
Power/
Menu/
Confirm
Button
Monitor
(Front View):
Monitor
(Back View):
Adjustable
Kickstand
Belt Clip
Battery
Compartment
A/V Out
Jack
AC
Adaptor
Jack
Camera
Battery
Pack:
Camera
Antenna
AC Adapter Jack
(on bottom of unit)
Microphone
Nighttime LED’s
(for darkened room)
Power On LED
Camera (Back View):
Camera (Front View):
Camera with Base (Side View):
Monitor:
Camera Base:
Monitor Charging Stand:
AV Jack:
Wall Anchor (1)
and Screw (1):
Security Clips (6):
Code
Button
Power On/
Off Switch
Scan
Use up and down arrows
to select which option
you would like to use
use the select button
to select that option
Pan/Scan with arrows
To add camera press
Camera Button from the
touch menu. Use up and
down arrows to navigate to
the add cam option.
Press (select) to enter the
add cam menu.
Note: This product can accept up to
four cameras. To order an additional
camera (#28064) please contact our
customer service department by
phone at 1-800-268-6237 or via e-mail at
[e-mail]
for details. For Europe call +44
(0)206-420-4429 or via e-mail at
[e-mail]
Use arrows to navigate to
the delete cam option.
Press (select) to enter the
delete cam menu.
select
Menu bar will stay on screen while
in scan mode until you press select.
Note: This only happens in
scan mode
use the select button to stop scan
mode and select room for your
main viewing option
Add Camera
Delete Camera
Camera Scan
Problem Solving:
No picture or sound on Monitor
• Make sure the Monitor is turned on
• Make sure the AC Adapters are plugged in
• Make sure the outlets are working
• Make sure Monitor and Camera are
SYNCHED up.
Sound but no picture on Monitor
• Press the Quick View/Video On/Off Button
once to turn on video mode
• Try adjusting the Brightness Control on the
Monitor
• Test reception by moving the Monitor and/or
CAMERA to different locations
Picture but no sound
• Turn up the volume on the Monitor using
the Volume Control
Picture not clear
• Position the Monitor closer to the CAMERA
if necessary
•
Move Monitor away from other monitors,
cordless phones, walkie-talkies, etc.
• Try adjusting the Brightness Control on the
Monitor
• Test reception by moving the Monitor
and/or CAMERA to different locations
Squealing sound
• Move the CAMERA and the Monitor
further away from each other
NEW COMPONENTS
Tap anywhere on the
touchscreen L and
the menu bars will
appear. Menu
disapears after
10-12 seconds of
inactivity.
A blue rectangle will
appear around the
button you are press-
ing- to indicate to the
user which button is
pressed.
Press for three seconds
to power off. Power off
screen will appear while
software is booting
down.
Note: Everytime you
power your monitor on
it will default to camera
one.
Pan/Scan- Use up, down,
left and right arrows to
control camera movement.
Once view cam is highlighted the
4 cameras will appear. Note: If
view cam was selected by acci-
dent press left arrow key to exit the
numbered cam menu.
Use the up and down arrows to
highlight the camera you would
like to view and press select to
view that option.
To scan all cameras in use for 8
second intervals, press camera
button from the touch menu. Use the
up and down arrows to navigate to
the scan option. Press select to
enter the scan mode.
The monitor will automatically scan
through all camera options every 8
seconds. To stop scan mode at anytime
press the home button. If scan mode
stops on an undesired camera selection,
press camera button from touch menu
and select view camera option. Follow
directions above listed in view camera.
Use the left and right arrows t
highlight the camera you would like
to delete and press select to
delete that camera. To exit hit the
home key
The cameras that are not synced
will be gray and the synced cam-
eras will be black. The camera will
automatically sync to the next
available channel.
While syncing the camera will blink,
once fully synced the camera will
turn solid black.
Press and hoild the Code button on
back of camera head until green
LED starts blinking.
To control brightness press bright-
ness control button from the
touch menu screen. Use up and
down arrows to control brightness.
To zoom into picture press the
zoom button from the touch
menu screen.
Press for three seconds
to power on. Power on
screen will appear
while software is boot-
ing up.
Home Button-
allows user to
escape from menu
at anytime.
1
2
3
4
4
IMPORTANT SAFETY INSTRUCTIONS
1) Read Instructions- All the safety and operating instructions should be
read before the product is operated.
2) Retain Instructions- The safety and operating instructions should be
retained for future reference.
3) Heed Warnings- All warnings on the product and in the operating
instructions should be adhered to.
4) Follow Instructions- All operating and use instructions should be
followed.
5) Cleaning- Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6) Attachments- Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7) Water and Moisture- Do not use this product near water- for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool; and the like.
8) Accessories- Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with
the product. Any mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory recommended by the
manufacturer.
9) Power Sources- This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type
of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other
sources, refer to the operating instructions.
10) Power-Cord Protection- Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
12) Power Lines- An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits as contact with them
might be fatal.
13) Overloading- Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric
shock.
14) Object and Liquid Entry- Never push objects of any kind into this
product through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the product.
15) Servicing- Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
16) Damage Requiring Service- Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into
the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the
operating instructions. Adjusting only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to it’s normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance-
this indicates a need for service.
17) Replacement Parts- When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufac-
turer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
18) Safety Check- Upon completion of any service or repairs to the product,
ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
19) Wall or Ceiling Mounting- The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
20) Heat- The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
Does This Need
to be Added?
1 2 3 4
FPO
FPO
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by
unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
FCC statement
User manual