Version: 1.
Dear Valued Customer, SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our sincere hope that you are completely satisfied with your new purchase. All SUMERAIN products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions.
VERSION: 20160320.18.1 This product has been manufactured and tested to the highest quality standards by SUMERAIN sanitary Inc("SUMERAIN").This warranty is limited to SUMERAIN products which are purchased by a consumer in the China after Jan 1,2010 and installed in China or the state which has SUMERAIN technical support department locally.(visit http://www.sumerain.com/en/supportcenter.asp for review the state list of SUMERAIN technical support department).
Function Bathroom Sink Faucets Feature Waterfall Style Contemporary Finish Chrome/Brushed Nickel/Matte Black Installation Holes Three Holes Number of Handles Two knobs Spout total Height 130mm [5-7/64 Inch] Spout Reach 120mm [4-23/32 Inch] Spout Width 80mm Spout Height 88mm [3-15/32 Inch] Max deck thickness 32mm [1-1/4 Inch] Valve Type Ceramic Disc Valve Valve Body Material Brass Spout Material Stainless steel Gross Weight 2,3 KG [ 5,07lbs ] Working water press 0.2 ~0.
FRONT VIEW OF FAUCET SIDE VIEW OF FAUCET
1. BEFORE PROCEEDING WARNING: Read all the instructions completely before proceeding.SUMERAIN recommends calling a Professional,if you are uncertain about installing this product!, this product should be installed in accordance with all local and state plumbing and building codes. 2. SHUT OFF WATER SUPPLY Locate water supply inlets and shut off the water supply valves. These are usually found near the water meter.
4. INSTALLATION HOLES INSPECTION Verify that the hole sizes and positions in the wall are correct, the diameter of mounting hole recommend 1-1/4” (32mm) and maximum 1-3/8” (35mm), the max thickness of deck should be 1-3/4” (45mm).
5. INSTALLATION 5.1 Turn on your shut-off valve for cleaning the hot and cold water supply pipe before connect to the faucet, allow the water flush 3~5 minutes to flush out dirt and debris. Shut off the water supply again after done. 5.2 Attached the flow restrictor to shank of spout.
5.3 Position spout onto the hole of mounting surface, attach rubber washer on spout shank and fasten with spout shank locknut by wrench from underneath. 5.4 Disassemble hot and cold water valve assembly to prepare for next step’s installation. Take out the screws cover from knob and loose the inside set screw by Allen wrench anticlockwise, disassemble the knob from the valve assembly.
5.5 Place the valve body onto mounting surface, attach the rubber washer and locknut from underneath of mounting surface, attached the O-ring with the escutcheon, Then reposition escutcheons as necessary to a desired height. 5.6 Fasten the knobs with set screws by Allen Key and repeat the same procedure for the right cold valve assembly.
5.6 Attach the washer into the tee for water leak proof. 5.
5.8 Connecting the cold water valve body and hot water valve body to tee with flexible hoses. 5.9 Connect hot valve body’s inlet connector and cold water valve inlet connector to stop valve separately with flexible hose. The water inlet connecting of hot and cold Valve body is G1/2” [1/2 BSPP], US, CA customers may require NPT cover to BSPP adapter for connecting.
6. INSPECTION 6.1 Turn on hold and cold water supply and check all connection for ensuring no leaking anywhere. INSTALL FINISH SUMERAIN SANITARY GROUP WWW.SUMERAIN.
Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.