User's Manual

ManualsBrandsSuga Electronics ManualsElectronics802.11b/g/n Wi-Fi Module with Access Point Function

Suga Electronics Limited

Information in this document is subject to change without prior notice

P. 1

802.11b/g/n (2T2R) WLAN AP/Router Module

User Manual

Model: SWP23MA-2

Version: 1.0

18 Jul 2013

Contents

1.1 FCC Caution………………………………………………………... 2

1.2 FCC Radiation Exposure Statement………………………...... ….. 2

1.3 IC Warning………………………….………………………...... ….. 2

2.0 Hardware Installation……..................……….………………........ 3

2.1 Hardware Installation Guide ………………..…………........ 3

3.0 Software Installation……..................……….…….…………........ 4

3.1 Booting up………………………………………..………........ 3

3.2 Operation Mode Configuration…………………………........ 5

3.3 Local Area Network (LAN) Settings…………………………. 6

3.4 Basic Wireless Settings…………………………….………….. 7

3.5 Advanced Wireless Settings……………………………..……. 8

3.6 Wireless Security/Encryption Settings…………………....…. 9

3.7 Station List………………………………………………..…… 10

4.0 Device Labelling ……………………………………………..…….. 11

5.0 Disclaimer……………………………………………………..…….. 11

Summary of content (12 pages)

PAGE 1
Suga Electronics Limited 802.11b/g/n (2T2R) WLAN AP/Router Module User Manual Model: SWP23MA-2 Version: 1.0 18 Jul 2013 Contents 1.1 FCC Caution………………………………………………………... 2 1.2 FCC Radiation Exposure Statement………………………...... ….. 2 1.3 IC Warning………………………….………………………...... ….. 2 2.0 Hardware Installation……..................……….………………........ 3 2.1 Hardware Installation Guide ………………..…………........ 3 3.0 Software Installation……..................……….…….…………........ 4 3.1 Booting up………………………………………..………........
PAGE 2
Suga Electronics Limited 1.1 FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: 1.
PAGE 4
Suga Electronics Limited 2.2 The SWP23MA-2 WLAN module will be installed into the embedded system user various operation systems(OS) such as Windows 2000/XP/CE or Linux.In this OEM manual,we will use Window XP as an example to show you how to install the driver on the OS. The SWP23MA-2 setup Wizard will guide you through the installation procedure.This Wizard will also guide you installing the utility and drivers. Note :The comments and conditions for other OS platform may be different from this chapter.
PAGE 5
Suga Electronics Limited 3.2 Operation Mode Configuration Select “Operation Mode” to configure the operation mode to fit you environment, in this menu, there are four options, please follow the description to choose the option you needed. If you want the module to act as an AP and Client, you should select “AP Client” mode and “enable” then click “Apply”. © Suga Electronics Ltd. All Rights Reserved. Information in this document is subject to change without prior notice P.
PAGE 6
Suga Electronics Limited 3.3 Local Area Network(LAN) Settings Select “LAN” option to set your home page IP, subnet mask, default gateway etc. the default IP is 10.10.10.254. © Suga Electronics Ltd. All Rights Reserved. Information in this document is subject to change without prior notice P.
PAGE 7
Suga Electronics Limited 3.4 Basic Wireless Settings You could configure the minimum number of Wireless settings for communication, such as Network Name (SSID), Network Mode (802.11b/g/n) and Channel. The Access Point can be set simply with only the minimum setting items. © Suga Electronics Ltd. All Rights Reserved. Information in this document is subject to change without prior notice P.
PAGE 8
Suga Electronics Limited 3.5 Advanced Wireless Settings Use the Advanced Setup page to make detailed settings for the Wireless. Advanced Setup includes items that are not available from the Basic Setup page, such as Beacon Interval, Control Tx Rates and Basic Data Rates. © Suga Electronics Ltd. All Rights Reserved. Information in this document is subject to change without prior notice P.
PAGE 9
Suga Electronics Limited 3.6 Wireless Security/Encryption Settings Setup the wireless security and encryption to prevent from unauthorized access and monitoring. © Suga Electronics Ltd. All Rights Reserved. Information in this document is subject to change without prior notice P.
PAGE 10
Suga Electronics Limited 3.7 Station List You could monitor stations which associated to this AP here. © Suga Electronics Ltd. All Rights Reserved. Information in this document is subject to change without prior notice P.
PAGE 12
Suga Electronics Limited 4.0 Device Labelling The host device containing this module must either: (1). Make the module label visible so that the FCC/IC ID is visible in the end construction. (2). Label the end product with the FCC ID and IC ID of the module. For example “Contain FCC ID: VZFSWP23MA2” and “Contain IC ID: 10609A-SWP23MA2” 5.0 Disclaimer Suga Electronics Limited assumes no responsibility for errors or omissions in the materials available on this Document.