TABLE OF CONTENTS 1 Before driving Adjusting and operating features such as door locks, mirrors, and steering column. 2 When driving Driving, stopping and safe-driving information. 3 Interior features Air conditioning and audio systems, as well as other interior features for a comfortable driving experience. 4 Maintenance and care Cleaning and protecting your vehicle, performing do-ityourself maintenance, and maintenance information.
TABLE OF CONTENTS Index 1-6. Security system 1 Before driving Engine immobilizer system ................................ 77 Theft prevention labels (U.S.A.)............................... 80 Alarm .................................... 81 1-1. Key information Keys ..................................... 20 1-2. Opening, closing and locking the doors and trunk lid Keyless access with push button start system............. Remote keyless entry system................................ Doors......................
2-2. Instrument cluster Gauges and meters ............ 185 Indicators and warning lights ................................. 190 Multi-information display ..... 195 2-3. Operating the lights and windshield wipers Headlight switch.................. 200 Fog light switch ................... 206 Windshield wipers and washer .............................. 207 2-4. Using other driving systems Interior features 3-1. Using the air conditioning system and defogger 1 Manual air conditioning system..................
TABLE OF CONTENTS 4 Index Maintenance and care 5 When trouble arises 5-1. Essential information 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ........... 272 Cleaning and protecting the vehicle interior ............ 276 Cleaning and protecting the Alcantara® area.......... 280 Hazard warning flashers..... If your vehicle needs to be towed ........................... If you think something is wrong................................ Fuel pump shut off system ....................
6 Vehicle specifications 6-1. Specifications 1 Maintenance data (fuel, oil level, etc.)............ 410 Fuel information .................. 422 Tire information ................... 426 2 6-2. Customization Customizable features ........ 439 7 3 For owners Reporting safety defects for U.S. owners ................. 444 Seatbelt instructions for Canadian owners (in French) ........................ 445 SRS airbag instructions for Canadian owners (in French) ........................
Pictorial index Exterior Headlights P. 200 Windshield wipers P. 207 Engine hood P. 292 Parking lights P. 200 Outside rear view mirrors P. 67 Front side marker lights P. 200 Towing eyelet P. 355 Turn signal lights P. 182 Front fog lights ∗ P. 206 6 Daytime running lights P.
Trunk lid P. 45 Rear window defogger P. 250 Turn signal lights P. 182 Rear side marker lights P. 200 Fuel filler lid Doors P. 73 P. 42 Tail lights P. 200 Towing eyelet P. 355 Towing eyelet P. 355 License plate lights P. 200 Tires ●Rotation ●Replacement ●Inflation pressure ●Information P. 308 P. 378 P. 315 P.
Pictorial index Head restraints Seatbelts Interior P. 56 P. 58 Navigation system ∗, * SRS curtain airbags SRS front passenger airbag P. 87 Child restraint anchor brackets P. 87 P. 136 Power outlet Cup holders P. 258 Console tray P. 258 SRS side airbags P. 264 P. 87 Front seats P. 51 Glove box P.
A Sun visors P. 260 Interior light P. 254 Vanity mirrors P. 261 Anti-glare inside rear view mirror P. 66 B Lock levers P. 43 Outside rear view mirror switches P. 67 Power door lock switch P. 43 Power window switches Window lock switch P. 70 P. 70 ∗ : If equipped *: Refer to “Navigation System Owner’s Manual”.
Pictorial index Interior C Select lever ∗ P. 172 Shift lever ∗ P. 179 Shift lock release button ∗ P. 392 Parking brake lever P. 183 Seat heater switches ∗ P. 266 Power outlet P. 264 “VSC SPORT” switch P. 217 Driving pattern selector switch ∗ P. 174 Vehicle stability control (VSC)/TRAC off switch P.
Pictorial index Instrument panel Gauges and meters P. 185 Multi-information display P. 195 Headlight switch P. 200 Turn signal lever P. 182 Fog light switch P. 206 Windshield wiper and washer switch P. 207 Clock P. 262 Hazard warning flasher switch P. 354 Tilt and telescopic steering lock release lever P. 65 Floor mat ∗ P. 268 Engine hood lock release lever P. 292 Fuel filler lid opener AUX port ∗ P. 252 USB port ∗ P. 252 P.
Pictorial index Instrument panel A Vehicles with a manual air conditioning system Air conditioning system P. 234 Rear window and outside rear view mirror defoggers switch ∗/rear window defogger switch ∗ P. 250 Vehicles with an automatic air conditioning system Air conditioning system P. 241 12 Rear window and outside rear view mirror defoggers P.
B Paddle shift levers ∗ P. 175, 177 Engine (ignition) switch (vehicles without a keyless access with push button start system) P. 169 Horn P. 184 SRS driver airbag Cruise control switch P. 210 P. 87 C Instrument panel light control dial P. 189 Manual headlight leveling dial P. 202 Trunk lid opener P.
For your information Main Owner’s Manual Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may find some explanations for equipment not installed on your vehicle. All specifications provided in this manual are current at the time of printing.
Installation of a mobile two-way radio system The installation of a mobile two-way radio system in your vehicle could affect electronic systems such as: ● Multiport fuel injection system/sequential multiport fuel injection system ● Cruise control system ● Anti-lock brake system ● SRS airbag system ● Seatbelt pretensioner system Be sure to check with your SUBARU dealer for precautionary measures or special instructions regarding installation of a mobile two-way radio system.
Event data recorder This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
Scrapping of your SUBARU The SRS airbag and seatbelt pretensioner devices in your SUBARU contain explosive chemicals. If the vehicle is scrapped with the airbags and seatbelt pretensioners left as they are, this may cause an accident such as fire. Be sure to have the systems of the SRS airbag and seatbelt pretensioner removed and disposed of by a qualified service shop or by your SUBARU dealer before you scrap your vehicle. Perchlorate Material Special handling may apply, See www.dtsc.ca.
Symbols used throughout this manual Warnings & Cautions WARNING This is a warning against something which, if ignored, may cause death or serious injury to people. You are informed about what you must or must not do in order to reduce the risk of death or serious injury to yourself and others. CAUTION This is a warning against something which, if ignored, may cause damage to the vehicle or its equipment.
Before driving 1-1. Key information Keys ................................... 20 1 1-4. Opening and closing the windows Power windows .................. 70 1-2. Opening, closing and locking the doors and trunk lid Keyless access with push button start system ............................. Remote keyless entry system ............................. Doors ................................. Trunk lid ............................. 1-5. Refueling Opening the fuel tank cap ...................................
1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without a keyless access with push button start system Master keys Operating the remote keyless entry system (→P. 37) Valet key Key number plate Vehicles with a keyless access with push button start system Access keys • Operating the keyless access with push button start system (→P. 23) • Operating the remote keyless entry system (→P.
1-1. Key information Using the mechanical key (vehicles with a keyless access with push button start system) To take out the mechanical key, slide the release lever and take the key out. ■ When required to leave the vehicle’s key with a parking attendant Turn the trunk lid opener main switch off as circumstances demand. (→P. 46) On vehicles without a keyless access with push button start system, provide the attendant with the valet key.
1-1. Key information CAUTION ■ To prevent key damage Observe the following: ● Do not drop the keys, subject them to strong shocks or bend them. ● Do not expose the keys to high temperatures for a long period of time. ● Do not get the keys wet or wash them in an ultrasonic washer etc. ● Do not attach metallic or magnetic materials to the keys or place the keys close to such materials. ● Do not disassemble the keys. ● Do not attach a sticker or anything else to the surface of the key.
1-2. Opening, closing and locking the doors and trunk lid Keyless access with push button start system∗ The following operations can be performed simply by carrying the access key on your person, for example in your pocket. (The driver should always carry the access key.) 1 Before driving Access key Access key Access key Unlocks and locks the doors (→P. 24) Unlocks the trunk lid (→P. 24) Starts the engine (→P.
1-2. Opening, closing and locking the doors and trunk lid Unlocking and locking the doors Grip the driver’s door handle to unlock the door. Grip the passenger’s door handle to unlock all the doors. Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the door is locked. Touch the lock sensor (the indentation on the side of the door handle) to lock the doors. Unlocking the trunk lid Press the button to unlock the trunk lid.
1-2.
1-2. Opening, closing and locking the doors and trunk lid ■ Effective range (areas within which the access key is detected) When locking or unlocking the doors The system can be operated when the access key is within about 1.3 - 2.6 ft. (0.4 0.8 m) of either of the outside door handles. (Only the doors detecting the key can be operated.) When unlocking the trunk lid The system can be operated when the access key is within about 1.3 - 2.6 ft. (0.4 0.8 m) of the trunk lid release button.
1-2. Opening, closing and locking the doors and trunk lid ■ Operation signals A buzzer sounds and the hazard warning flashers flash to indicate that the doors have been locked/unlocked. (Locked: once; Unlocked: twice) 1 ■ When the door cannot be locked by the lock sensor Before driving Use your palm to touch the lock sensor. ■ Door lock buzzer If an attempt to lock the doors is made when a door is not fully closed, a buzzer sounds continuously.
1-2. Opening, closing and locking the doors and trunk lid Alarm Situation Correction procedure An attempt was made to lock the doors using the keyless access with push button start system while the access key was still inside the vehicle. Retrieve the access key from the vehicle and lock the doors again. An attempt was made to lock the vehicle while a door was open. Close all of the doors and lock the doors again.
1-2. Opening, closing and locking the doors and trunk lid ■ Battery-saving function The battery-saving function will be activated in order to prevent the access key battery and the vehicle battery from being discharged while the vehicle is not in operation for a long time. ● In the following situations, the keyless access with push button start system may take some time to unlock the doors. 1 • The access key has been left in an area of approximately 6 ft.
1-2. Opening, closing and locking the doors and trunk lid ■ Conditions affecting operation The keyless access with push button start system uses weak radio waves. In the following situations, the communication between the access key and the vehicle may be affected, preventing the keyless access with push button start system, remote keyless entry system and engine immobilizer system from operating properly. (Way of coping →P.
1-2. Opening, closing and locking the doors and trunk lid ■ Notes for the “keyless access” entry function ● Even when the access key is within the effective range (detection areas), the system may not operate properly in the following cases: ● As long as the access key is within the effective range, the doors may be locked or unlocked by anyone. ● Even if the access key is not inside the vehicle, it may be possible to start the engine if the access key is near the window.
1-2. Opening, closing and locking the doors and trunk lid ■ Notes for locking the doors ● Touching the door lock sensor while wearing gloves may delay or prevent lock operation. Remove the gloves and touch the lock sensor again. ● When the lock operation is performed using the lock sensor, recognition signals will be shown up to two consecutive times. After this, no recognition signals will be given.
1-2. Opening, closing and locking the doors and trunk lid ■ When the vehicle is not driven for extended periods ● To prevent theft of the vehicle, do not leave the access key within 6 ft. (2 m) of the vehicle. ● The keyless access with push button start system can be deactivated in advance. (→P. 439) 1 ■ Alarm* (if equipped) *: The alarm’s default setting is set to off. ■ To operate the system properly Make sure to carry the access key when operating the system.
1-2. Opening, closing and locking the doors and trunk lid ■ Access key battery depletion ● The standard battery life is 1 to 2 years. ● If the battery becomes low, an alarm will sound in the cabin when the engine stops. (→P. 374) ● As the access key always receives radio waves, the battery will become depleted even if the access key is not used. The following symptoms indicate that the access key battery may be depleted. Replace the battery when necessary. (→P.
1-2. Opening, closing and locking the doors and trunk lid ■ Customization that can be configured at SUBARU dealer Settings (e. g. keyless access with push button start system) can be changed. (Customizable features: →P. 439) ■ Certification for keyless access with push button start system 1 For vehicles sold in the U.S.A. FCC ID: HYQ23AAE FCC ID: HYQ14ACX NOTE: This device complies with part 15 of the FCC Rules.
1-2. Opening, closing and locking the doors and trunk lid WARNING ■ Caution regarding interference with electronic devices ● People with implanted pacemakers or cardiac defibrillators should keep away from the keyless access with push button start system antennas. (→P. 25) The radio waves may affect the operation of such devices. If necessary, the “keyless access” entry function can be disabled. Ask your SUBARU dealer for details, such as the frequency of radio waves and timing of emitting the radio waves.
1-2. Opening, closing and locking the doors and trunk lid Remote keyless entry system The remote keyless entry system can be used to lock and unlock the vehicle. Vehicles without a keyless access with push button start system 1 Locks both side doors Before driving Sounds the alarm (press and hold) Unlocks both side doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other door.
1-2. Opening, closing and locking the doors and trunk lid ■ Operation signals Doors: A buzzer sounds and the hazard warning flashers flash to indicate that the doors have been locked/unlocked. (Locked: once; Unlocked: twice) Trunk lid: A buzzer sounds to indicate that the trunk lid has been unlocked. ■ Door lock buzzer (vehicles with a keyless access with push button start system) If an attempt to lock the doors is made when a door is not fully closed, a buzzer sounds continuously.
1-2. Opening, closing and locking the doors and trunk lid ■ Vehicle finder function Vehicles without a keyless access with push button start system Vehicles with a keyless access with push button start system A buzzer (sounds once) and the hazard warning flashers (flash 3 times) are used to inform the driver of the vehicle’s location. Press 3 times within 5 seconds while within a circumference of approximately 30 ft. (10 m) from of the vehicle.
1-2.
1-2. Opening, closing and locking the doors and trunk lid ■ Certification for remote keyless entry system For vehicles sold in the U.S.A. FCC ID: HYQ23AAA FCC ID: HYQ12BBY FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
1-2. Opening, closing and locking the doors and trunk lid Doors The vehicle can be locked and unlocked using the “keyless access” entry function, remote keyless entry system, key or power door lock switch. ■ “Keyless access” entry function (vehicles with a keyless access with push button start system) →P. 24 ■ Remote keyless entry system →P.
1-2.
1-2. Opening, closing and locking the doors and trunk lid Locking the doors from the outside without a key STEP 1 Move the lock lever to the lock position. STEP 2 Close the door. Vehicles with a keyless access with push button start system The door cannot be locked if the access key is left inside the vehicle. The key may not be detected correctly and the door may be locked.
1-2. Opening, closing and locking the doors and trunk lid Trunk lid The trunk lid can be opened using the key, trunk lid opener, “keyless access” entry function or remote keyless entry system. ■ Opening the trunk lid from inside the vehicle 1 Press and hold the opener switch to release the trunk lid. Before driving If the trunk lid cannot be opened by the opener switch: →P.
1-2. Opening, closing and locking the doors and trunk lid Canceling the trunk lid opener feature To protect luggage stored in the trunk lid against theft, do the following: Turn the main switch in the trunk lid off to disable the trunk lid opener. On (The trunk lid can be opened using the trunk lid opener.) Off (The trunk lid cannot be opened using the trunk lid opener.) Vehicles without a keyless access with push button start system: The trunk lid can only be opened with the master key.
1-2. Opening, closing and locking the doors and trunk lid ■ Function to prevent the trunk lid being locked with the access key inside (vehicles with a keyless access with push button start system) ● Even when the spare access key is put in the trunk with all the doors locked, the key confinement prevention function can be activated so the trunk lid can be opened. In order to prevent theft, take all access keys with you when leaving the vehicle.
1-2. Opening, closing and locking the doors and trunk lid WARNING ■ Caution while driving ● Keep the trunk lid closed while driving. If the trunk lid is left open, it may hit nearby objects while driving or luggage in the trunk may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a serious health hazard. Make sure to close the trunk lid before driving. ● Before driving the vehicle, make sure that the trunk lid is fully closed.
1-2. Opening, closing and locking the doors and trunk lid WARNING ■ Using the trunk Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in serious injury. ● When opening or closing the trunk lid, thoroughly check to make sure the surrounding area is safe. ● If anyone is in the vicinity, make sure they are safe and let them know that the trunk lid is about to open or close.
1-2. Opening, closing and locking the doors and trunk lid CAUTION ■ Trunk lid damper stays The trunk lid is equipped with damper stays that hold the trunk lid in place. Observe the following precautions. Failure to do so may cause damage to trunk lid damper stays, resulting in a malfunction. ● Do not attach any foreign objects such as stickers, plastic sheets and adhesives to damper stay rods. ● Do not touch damper stay rods with gloves or other fabric items.
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Seat position lever adjustment Seatback angle adjustment lever 1 Before driving Vertical height adjustment lever (driver’s side only) Seatback fold strap Getting in and out of the rear seats To get in and out of the rear seats, use the seatback angle adjustment lever or seatback fold strap. ■ Before getting in or out of the rear seats Release the seatbelt from the seatbelt guide. (→P.
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Getting out of the rear seats Pull the seatback fold strap. The seatback will fold forward. Front passenger seat only: The seat can be slid forward and backward. ■ After getting in or out of the rear seats Return the seatback to the upright position until the seat locks. Front passenger seat only: The seat will lock in position at the point where the seatback reaches the upright position.
1-3. Adjustable components (seats, mirrors, steering wheel) WARNING ● After adjusting the seat, push it slightly to make sure it is securely locked. If the seat is not securely locked, it may move or the seatbelt may not operate properly. ● When returning the seatback upright, perform seatback angle adjustment while holding down the seatback. ● Do not pull on or use the seatbelt guide to adjust or fold the front seat.
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats The seatbacks of the rear seats can be folded down. Pull the both left and right seatback lock release straps in the trunk lid to fold down the seatback. To return the seatbacks to its original position, lift it up until it locks. ■ Seat dust cover Always remove the seat dust cover that may be attached at the time of purchase before using the seat.
1-3. Adjustable components (seats, mirrors, steering wheel) WARNING ■ When folding the rear seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. 1 ● Do not fold the seatbacks down while driving. ● Do not allow anyone to sit on a folded seatback or in the trunk while driving. ● Do not allow children to enter the trunk. ■ After returning the rear seatback to the upright position Observe the following precautions.
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for front seats. Up Pull the head restraints up. Down Push the head restraint down while pushing the lock release button. Lock release button ■ Removing the head restraints Pull the head restraint up while pressing the lock release button. ■ Installing the head restraints Align the head restraint with the installation holes and push it down to the lock position.
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. 1 Before driving WARNING ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ● Use the head restraints designed for each respective seat.
1-3. Adjustable components (seats, mirrors, steering wheel) Seatbelts Make sure that all occupants are wearing their seatbelts before driving the vehicle. ■ Correct use of the seatbelts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder. ● Position the lap belt as low as possible over the hips. ● Adjust the position of the seatback. Sit up straight and well back in the seat. ● Do not twist the seatbelt.
1-3. Adjustable components (seats, mirrors, steering wheel) Front seatbelt guide To enable the seatbelt to be easily extended, pass the seatbelt through the guide. Seatbelt pretensioners (front seats) The pretensioner helps the seatbelt to quickly restrain the occupant by retracting the seatbelt when the vehicle is subjected to certain types of severe frontal collision and/or side collision. The pretensioner may not activate in the event of a minor frontal impact, a side impact or a rear impact.
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully. ■ Automatic locking retractor (ALR) When a passenger's shoulder belt is completely extended and then retracted even slightly, the belt is locked in that position and cannot be extended.
1-3. Adjustable components (seats, mirrors, steering wheel) ● The following two components operate simultaneously when the vehicle is subjected to a severe collision on the front passenger’s seat side of the vehicle. ● If either front seatbelt does not retract or cannot be pulled out due to a malfunction or activation of the pretensioner, contact your SUBARU dealer as soon as possible.
1-3. Adjustable components (seats, mirrors, steering wheel) WARNING Observe the following precautions to reduce the risk of injury in the event of sudden braking, sudden swerving or an accident. Failure to do so may cause death or serious injury. ■ Wearing a seatbelt ● Ensure that all passengers wear a seatbelt. ● Always wear a seatbelt properly. ● Each seatbelt should be used by one person only. Do not use a seatbelt for more than one person at once, including children.
1-3. Adjustable components (seats, mirrors, steering wheel) WARNING ■ People with a medical condition Obtain medical advice and wear the seatbelt in the proper way. 1 ■ When children are in the vehicle ■ Seatbelt pretensioners If the pretensioner has activated, the SRS airbag system warning light will come on. In that case, the seatbelt cannot be used again and must be replaced at your SUBARU dealer. 63 Before driving Do not allow children to play with the seatbelt.
1-3. Adjustable components (seats, mirrors, steering wheel) WARNING ■ Seatbelt damage and wear ● Do not damage the seatbelts by allowing the belt, plate, or buckle to be jammed in the door. ● Inspect the seatbelt system periodically. Check for cuts, fraying, and loose parts. Replace a damaged seatbelt immediately. Damaged seatbelts cannot protect an occupant from death or serious injury. ● Ensure that the belt and plate are locked and the belt is not twisted.
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. STEP 1 Hold the steering wheel and push the lever down. 1 Before driving STEP 2 Adjust to the ideal position by moving the steering wheel horizontally and vertically. After adjustment, pull the lever up to secure the steering wheel. WARNING ■ Caution while driving Do not adjust the steering wheel while driving.
1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror The rear view mirror’s position can be adjusted to enable sufficient confirmation of the rear view in accordance with the driver's seating posture. Adjusting the height of rear view mirror Adjust the height of the rear view mirror by moving it up and down. Anti-glare function Reflected light from the headlights of vehicles behind can be reduced by operating the lever.
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. STEP 1 Select a mirror to adjust. Left 1 Right Before driving STEP 2 Adjust the mirror.
1-3. Adjustable components (seats, mirrors, steering wheel) Folding the mirrors Manual operation Push the mirror back in the direction of the vehicle’s rear. Power operation (if equipped) Press the switch to fold the mirrors. Press it again to extend them to the original position. ■ The mirrors can be adjusted when Vehicles without a keyless access with push button start system The engine switch is in the “ACC” or “ON” position.
1-3. Adjustable components (seats, mirrors, steering wheel) WARNING ■ When driving the vehicle Observe the following precautions while driving. Failure to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. ● Do not drive with the mirrors folded. ● Both the driver and passenger side mirrors must be extended and properly adjusted before driving.
1-4. Opening and closing the windows Power windows The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing* Opening One-touch opening* *: Pushing the switch in the opposite direction will stop window travel partway. Window lock switch Press the switch down to lock the passenger window glasses. Use this switch to prevent children from accidentally opening or closing a passenger window.
1-4. Opening and closing the windows ■ The power windows can be operated when Vehicles without a keyless access with push button start system The engine switch is in the “ON” position. 1 Vehicles with a keyless access with push button start system The push-button ignition switch is in “ON” mode. Vehicles without a keyless access with push button start system The power windows can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position.
1-4. Opening and closing the windows ■ When the power window does not close normally If the jam protection function is operating abnormally and a window cannot be closed, close all the doors perform the following operations using the power window switch on the relevant door. STEP 1 Vehicles without a keyless access with push button start system: After stopping the vehicle, the engine switch is turned to the “ON” position.
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: ■ Before refueling the vehicle ● Vehicles without a keyless access with push button start system: Turn the engine switch off and ensure that all the doors and windows are closed. 1 Before driving ● Vehicles with a keyless access with push button start system: Turn the push-button ignition switch off and ensure that all the doors and windows are closed. ● Confirm the type of fuel. (→P.
1-5. Refueling STEP 3 Hang the fuel tank cap on the back of the fuel filler lid. Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction.
1-5. Refueling WARNING ■ Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. 1 ● Do not handle fuel indoors. ● Always hold the grips on the fuel tank cap and turn it slowly to remove it. A whooshing sound may be heard when the fuel tank cap is loosened. Wait until the sound cannot be heard before fully removing the cap. In hot weather, pressurized fuel may spray out of the filler neck and cause injury.
1-5. Refueling WARNING ■ When refueling Observe the following precautions to prevent fuel overflowing from the fuel tank: ● Securely insert the fuel nozzle into the fuel filler neck ● Stop filling the tank after the fuel nozzle automatically clicks off ● Do not top off the fuel tank ● Observe other precautions that are posted at the service station. ● Turn the cap to the right until it clicks to ensure that it is fully tightened.
1-6. Security system Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. 1 Never leave the keys inside the vehicle when you leave the vehicle. Before driving Vehicles without a keyless access with push button start system The indicator light flashes after the key has been removed from the engine switch to indicate that the system is operating.
1-6. Security system Vehicles with a keyless access with push button start system The indicator light flashes after the push-button ignition switch has been turned off to indicate that the system is operating. The indicator light stops flashing after the push-button ignition switch has been turned to “ACC” or “ON” mode to indicate that the system has been canceled.
1-6. Security system ■ Certification for engine immobilizer system For vehicles sold in the U.S.A. FCC ID: Y8PSSPIMB03 FCC ID: MOZRI-38BFH FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
1-6. Security system Theft prevention labels (U.S.A.) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from stolen vehicles. Do not remove under penalty of law.
1-6. Security system Alarm∗ The alarm’s default setting is set to off. To use the alarm, perform the activating the alarm system procedures. The system sounds the alarm and flashes the lights when forcible entry is detected. 1 ■ Triggering of the alarm Before driving The alarm is triggered when a locked door or the trunk lid is unlocked or opened in any way other than using the “keyless access” entry function or remote keyless entry system while the alarm is set.
1-6. Security system ■ Deactivating or stopping the alarm Perform one of the following to deactivate or stop the alarm: ● Unlock the doors using the “keyless access” entry function. ● Unlock the doors using the remote keyless entry system. ● Turn the push-button ignition switch to “ACC” or “ON” mode, or start the engine. (The alarm will be deactivated or stopped after a few seconds.) Activating/deactivating the alarm system STEP 1 Check that both side doors and the trunk lid are closed.
1-6. Security system ■ System maintenance The vehicle has a maintenance-free type alarm system. ■ Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following. 1 Before driving ● Nobody is in the vehicle. ● The windows are closed before the alarm is set. ● No valuables or other personal items are left in the vehicle.
1-6. Security system ■ When the battery is disconnected Be sure to deactivate the alarm system. If the battery is disconnected before deactivating the alarm system, the alarm may be triggered when the battery is reconnected. ■ Customization that can be configured at your SUBARU dealer Settings (e.g. alarm system) can be changed. (Customizable features →P. 439) CAUTION ■ To ensure the system operates correctly Do not modify or remove the system.
1-7. Safety information Correct driving posture Drive with a good posture as follows: Sit upright and well back in the seat. (→P. 51) 1 Before driving Adjust the position of the seat forward or backward to ensure the pedals can be reached and easily depressed to the extent required. (→P. 51) Adjust the seatback so that the controls are easily operable. (→P. 51) Adjust the tilt and telescopic positions of the steering wheel to allow easy operation and to ensure the airbag is facing your chest. (→P.
1-7. Safety information WARNING ■ While driving ● Do not adjust the position of the driver's seat. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seatbelt and head restraint, increasing the risk of death or serious injury to the driver or passenger. ● Do not place anything under the front seats.
1-7. Safety information SRS airbag (Supplemental Restraint System airbag) The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seatbelts to help reduce the risk of death or serious injury. 1 Before driving SRS: This stands for supplemental restraint system. This name is used because the airbag system supplements the vehicle’s seatbelts.
1-7. Safety information Driver’s and front passenger’s frontal airbags Driver’s and front passenger’s side airbags Curtain airbags (for driver, front passenger, and window-side rear passengers) These SRS airbags are designed only as a supplement to the primary protection provided by the seatbelt. The system also controls front seatbelt pretensioners. For operation instructions and precautions concerning the seatbelt pretensioner, refer to “Seatbelt pretensioners”. (→P.
1-7. Safety information WARNING ■ SRS airbag Not wearing a seatbelt increases the chance of severe injury or death in a crash even when the vehicle has the SRS airbag. For instructions and precautions concerning the seatbelt system, refer to “Seatbelts”. (→P. 58) ● Do not sit or lean unnecessarily close to the SRS airbag.
1-7. Safety information WARNING ■ SRS airbag ● Put children aged 12 and under in the rear seat properly restrained at all times. The SRS airbag deploys with considerable speed and force and can injure or even kill children, especially if they are 12 years of age and under and are not restrained or improperly restrained. Because children are lighter and weaker than adults, their risk of being injured from deployment is greater.
1-7. Safety information WARNING ■ SRS airbag ● NEVER INSTALL A REARWARD FACING CHILD SEAT IN THE FRONT SEAT. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’S HEAD TOO CLOSE TO THE SRS AIRBAG. ● When the SRS airbag deploys, some smoke will be released. This smoke could cause breathing problems for people with a history of asthma or other breathing trouble. If you or your passengers have breathing problems after SRS airbag deploys, get fresh air promptly.
1-7.
1-7. Safety information Side airbag sensor (center pillar left-hand side) Airbag control module (including impact sensors) Side airbag module (driver’s side) Front sub sensor (left-hand side) Door impact sensor (lefthand side) Curtain airbag module (left side) 1 The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag control module. The airbag control module consists of an airbag sensor.
1-7. Safety information SUBARU advanced frontal airbag system Your vehicle is equipped with a SUBARU advanced frontal airbag system that complies with the new advanced frontal airbag requirements in the amended Federal Motor Vehicle Safety Standard (FMVSS) No. 208.
1-7. Safety information ■ Driver’s SRS frontal airbag The driver’s SRS frontal airbag uses a dual stage inflator. The inflator operates in different ways depending on the severity of impact. Have the system inspected by your SUBARU dealer immediately if the SRS airbag system warning light illuminates. ■ Front passenger’s SRS frontal airbag The front passenger’s SRS frontal airbag uses a dual stage inflator. The inflator operates in different ways depending on the severity of impact.
1-7. Safety information If the seatbelt buckle switch and/or front passenger’s occupant detection system have failed, the SRS airbag system warning light will illuminate. Have the system inspected by your SUBARU dealer immediately if the SRS airbag system warning light illuminates. If your vehicle has sustained impact, this may affect the proper function of the SUBARU advanced frontal airbag system. Have your vehicle inspected at your SUBARU dealer.
1-7. Safety information Also, if luggage or electronic devices are placed on the front passenger’s seat, this may adversely affect the ability of the system to determine deployment. This may prevent the front passenger’s frontal airbag ON and OFF indicators from working properly. Check that the indicators work properly. When the OFF indicator turns off and the ON indicator illuminates, the front passenger’s frontal airbag may deploy during a collision.
1-7.
1-7. Safety information ● Ensure that no article is placed on the seat other than the occupant. If the ON indicator still remains illuminated while the OFF indicator turns off despite the fact that the actions noted above have been taken, seat the child/small adult in the rear seat and immediately contact your SUBARU dealer for an inspection. Even if the system has passed the dealer inspection, it is recommended that on subsequent trips the child/small adult always take the rear seat.
1-7. Safety information ■ If the passenger’s frontal airbag OFF indicator illuminates and the ON indicator turns off even when the front passenger’s seat is occupied by an adult This can be caused by the adult incorrectly sitting in the front passenger’s seat. Turn the ignition switch to the “LOCK” position (vehicles without a keyless access with push button start system), or turn the push-button ignition switch off (vehicles with a keyless access with push button start system).
1-7. Safety information ■ How to contact the vehicle manufacturer concerning modifications for persons with disabilities that may affect the advanced airbag system (U.S. only) Subaru of America, Inc. Customer Dealer Services Department P.O. Box 6000 Cherry Hill, NJ 08034-6000 1-800-SUBARU3 (1-800-782-2783) Servco Subaru Inc.
1-7. Safety information ■ Operation Driver's side SRS AIRBAGs deploy as soon as a collision occurs. After deployment, SRS AIRBAGs start to deflate immediately so that the driver’s vision is not obstructed. Passenger’s side SRS AIRBAGs deploy as soon as a collision occurs. After deployment, SRS AIRBAGs start to deflate immediately so that the driver's vision is not obstructed.
1-7. Safety information The SRS airbag can function only when the ignition switch is in the “ON” position. If the front sub sensors and the impact sensors in the airbag control module detect a predetermined amount of force during a frontal collision, the control module sends signals to the airbag module(s) (only driver’s module or both driver’s and front passenger’s modules) instructing the module(s) to inflate the SRS frontal airbag(s).
1-7. Safety information The driver’s SRS frontal airbag and front passenger’s SRS frontal airbag are designed to deploy in the event of an accident involving a moderate to severe frontal collision. They are not designed to deploy in most lesser frontal impacts because the necessary protection can be achieved by the seatbelt alone.
1-7. Safety information ■ Examples of the types of accidents in which it is possible that the driver’s/driver’s and front passenger’s SRS frontal airbag(s) will deploy ■ Examples of the types of accidents in which deployment of the driver’s/driver’s and front passenger’s SRS frontal airbag(s) is unlikely to occur There are many types of collisions which might not necessarily require deployment of driver’s/driver’s and front passenger’s SRS frontal airbag(s).
1-7. Safety information The vehicle slides under the load bed of a truck. The vehicle sustains an oblique offset frontal impact. The vehicle sustains an offset frontal collision. The vehicle strikes an object that can move or deform, such as a parked vehicle.
1-7. Safety information ■ Examples of the types of accidents in which the driver’s/driver’s and front passenger’s SRS frontal airbag(s) will basically not deploy First impact Second impact In an accident where the vehicle is impacted more than once, the driver’s and/or front passenger’s SRS frontal airbag(s) will deploy only once on the first impact.
1-7. Safety information WARNING ■ If the SRS airbags deploy Do not touch the SRS airbag system components around the steering wheel and dashboard with bare hands right after deployment. Doing so can cause burns because the components can be very hot as a result of deployment. ■ Child restraint precautions NEVER INSTALL A REARWARD FACING CHILD SEAT IN THE FRONT PASSENGER’S SEAT EVEN IF THE FRONT PASSENGER’S SRS FRONTAL AIRBAG IS DEACTIVATED. Be sure to install it in the REAR seat in a correct manner.
1-7. Safety information SRS side airbag and SRS curtain airbag The SRS side airbag is stored in the door side of each front seat seatback, which bears an “SRS AIRBAG” label. The SRS curtain airbag on each side of the cabin is stored in the roof side (between the front pillar and a point over the rear seat). An “SRS AIRBAG” mark is located at the top of each center pillar.
1-7. Safety information ■ Operation The SRS side airbag and SRS curtain airbag can function only when the ignition switch is in the “ON” position. The driver’s and front passenger’s SRS side airbags and SRS curtain airbags deploy independently of each other since each has its own impact sensor. Therefore, they may not both deploy in the same accident.
1-7. Safety information The SRS side airbag and SRS curtain airbag deploy even when no one occupies the seat on the side on which an impact is applied. When the SRS side airbag and SRS curtain airbag deploy, a sudden, fairly loud inflation noise will be heard and some smoke will be released. These occurrences are a normal result of the deployment. This smoke does not indicate a fire in the vehicle.
1-7. Safety information The vehicle is involved in an oblique sideon impact. The vehicle is involved in a side-on impact in an area outside the vicinity of the passenger compartment. The vehicle strikes a telephone pole or similar object. The vehicle is involved in a side-on impact from a motorcycle. The vehicle rolls onto its side or roof.
1-7. Safety information ■ Examples of the types of accidents in which the SRS side airbag and SRS curtain airbag will basically not deploy The vehicle is involved in frontal collision with another vehicle (moving or stationary). Before driving The vehicle is struck from behind. The SRS side airbag and SRS curtain airbag are not designed to deploy in most cases if the vehicle is involved in a frontal collision or is struck from behind. Examples of such accidents are illustrated.
1-7. Safety information WARNING ■ If the SRS airbags deploy Do not touch the SRS side airbag system components around the front seat seatback with bare hands right after deployment. Doing so can cause burns because the components can be very hot as a result of deployment. After deployment, do not touch any part of the SRS curtain airbag system (from the front pillar to the part of the roof side over the rear seat). Doing so can cause burns because the components can be very hot as a result of deployment.
1-7. Safety information ●A portion of a door is damaged or deformed, or the vehicle was involved in an accident that was not severe enough to cause the SRS side airbags and curtain airbags to inflate. ●The surface of the seats with the side airbag is scratched, cracked, or otherwise damaged. ●The portion of the front pillars, rear pillars or roof side rail garnishes (padding) containing the curtain airbags inside is scratched, cracked or otherwise damaged.
1-7. Safety information WARNING ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seatbelts properly. The SRS airbags are supplemental devices to be used with the seatbelts.
1-7. Safety information WARNING ■ SRS airbag precautions ● Improperly seated and/or restrained infants and children can be killed or seriously injured by a deploying airbag. An infant or child who is too small to use a seatbelt should be properly secured using a child restraint system. SUBARU strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat. (→P.
1-7. Safety information WARNING ■ SRS airbag precautions ● Do not allow anyone to kneel on the passenger seat toward the door or put their head or hands outside the vehicle. ● Do not attach anything to or lean anything against areas such as the dashboard or steering wheel pad. These items can become projectiles when SRS driver and front passenger airbags deploy. ● Do not attach anything to areas such as a door, windshield glass, side door glass, rear quarter glass, front and rear pillar or roof side rail.
1-7. Safety information WARNING ■ SRS airbag precautions ● Do not touch any of the component parts immediately after the SRS airbags have deployed (inflated) as they may be hot. ● If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your SUBARU dealer.
1-7. Safety information SRS airbag system monitors A diagnostic system continually monitors the readiness of the SRS airbag system (including front seatbelt pretensioners) while the vehicle is being driven. The SRS airbag system warning light will show normal system operation by illuminating for approximately 6 seconds when the ignition switch is turned to the “ON” position.
1-7.
1-7. Safety information Front passenger occupant detection system Your vehicle is equipped with a front passenger occupant detection system. Using the sensors installed under the seat cover, the system detects the conditions of the front passenger seat and activates or deactivates the frontal airbag for front passenger seat. The occupant detection system may not inflate the front passenger’s SRS frontal airbag even when the driver’s SRS frontal airbag deploys. This is not a malfunction.
1-7. Safety information 123 1 Before driving The front passenger’s frontal airbag ON and OFF indicators show you the status of the front passenger’s SRS frontal airbag. When the engine switch is turned to the “ON” position, (vehicles without a keyless access with push button start system), or the push-button ignition switch is turned to “ON” mode (vehicles with a keyless access with push button start system), both the ON and OFF indicators illuminate for 6 seconds during the system check.
1-7.
1-7.
1-7. Safety information *1: The occupant detection system does not operate during selfchecking. *2: The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may not recognize him/her as an adult depending on his/her physique and posture. *3: In the event the front passenger does not wear a seatbelt. *4: The front passenger’s SRS side airbag, SRS curtain airbag and seatbelt pretensioner are not controlled by the occupant detection system.
1-7. Safety information If the passenger’s frontal airbag OFF indicator illuminates and the ON indicator turns off even when the front passenger’s seat is occupied by an adult This can be caused by an adult incorrectly sitting in the front passenger’s seat. Perform the following. Vehicles without a keyless access with push button start system: The engine switch is turned to the “LOCK” position. Vehicles with a keyless access with push button start system: Turn the push-button ignition switch off.
1-7. Safety information STEP 5 Turn the engine switch to the “ON” position (vehicles without a keyless access with push button start system), or the pushbutton ignition switch to “ON” mode (vehicles with a keyless access with push button start system). The ON and OFF indicators illuminate for 6 seconds during the system check and after the system check is performed, the ON and OFF indicators turn off for 2 seconds. Then, the OFF indicator remains off while the ON indicator is illuminated.
1-7. Safety information STEP 3 Vehicles without a keyless access with push button start system: The engine switch is turned to the “ON” position and make sure that the front passenger’s frontal airbag ON indicator turns off and the OFF indicator illuminates. STEP 4 If the ON indicator still remains illuminated while the OFF indicator turns off, perform the following. • Ensure that no article is placed on the seat other than the child restraint system and the child occupant.
1-7. Safety information WARNING ■ Front passenger occupant detection system precautions Observe the following precautions regarding front passenger occupant detection system. Failure to do so may cause the occupant detection system to not function correctly, resulting in death or serious injury. ● Wear the seatbelt properly. ● Do not apply excessive force to the seat. ● Do not put sharp object(s) on the seat or pierce the seat upholstery. ● Do not put objects under the front passenger seat.
1-7. Safety information WARNING ■ Front passenger occupant detection system precautions ● If luggage or electronic devices are placed on the front passenger seat, the OFF indicator may turn off and the ON indicator may illuminate. If this occurs, the front passenger’s airbag may deploy during a collision. If this is not desirable, remove the luggage or electronic devices from the front passenger seat.
1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be properly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems. Points to remember Studies have shown that installing a child restraint on a rear seat is much safer than installing one to the front passenger seat.
1-7. Safety information Forward facing Convertible seat 1 Before driving Booster seat ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the child becomes large enough to properly wear the vehicle’s seatbelt. ● If a child is too large for a child restraint system, sit the child on a rear seat and use the vehicle's seatbelt. (→P.
1-7. Safety information ● Front passenger’s seat Do not install a child restraint system (including a booster cushion) due to the hazard to children posed by the passenger’s airbag. ● Rear seat seating positions Recommended installing positions for the child restraint systems. In these positions, the following equipment is provided for installing a child restraint system.
1-7. Safety information WARNING ■ Child restraint precautions ● Make sure you have complied with all installation instructions provided by the child restraint manufacturer and that the system is properly secured. If it is not secured properly, it may cause death or serious injury to the child in the event of a sudden stop, sudden swerve or an accident. ■ When children are in the vehicle Do not allow children to play with the seatbelt.
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seatbelt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Children) system. Child restraint LATCH anchors LATCH anchors are provided for both rear seats.
1-7. Safety information Installation with LATCH system Type A STEP 1 If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchors. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system. Canada only 137 1 Before driving STEP 2 Latch the hooks of the lower straps onto the LATCH anchors.
1-7. Safety information Type B STEP 1 Latch the buckles onto the LATCH anchors. STEP 2 If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchors. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.
1-7. Safety information Installing child restraints using a seatbelt (child restraint lock function belt) ■ Rear facing Infant seat/convertible seat Place the child restraint system on the rear seat facing the rear of the vehicle. STEP 2 Run the seatbelt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. STEP 3 Fully extend the shoulder belt and allow it to retract to put it in lock mode. In lock mode, the belt cannot be extended.
1-7. Safety information STEP 4 While pushing the child restraint system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended. ■ Forward facing Convertible seat STEP 1 Place the child restraint system on the seat facing the front of the vehicle.
1-7. Safety information While pushing the child restraint system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. STEP 4 STEP 5 If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. (→P. 142) ■ Booster seat STEP 1 Place the child restraint system on the seat facing the front of the vehicle. STEP 2 Sit the child in the child restraint system.
1-7. Safety information Removing a child restraint installed with a seatbelt Push the buckle release button and fully retract the seatbelt. Child restraint systems with a top tether strap STEP 1 STEP 2 Secure the child restraint using a seatbelt or the LATCH anchors. Remove cover. the anchor bracket Store the removed cover in a safe place. STEP 3 Latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched.
1-7. Safety information ■ When installing a child restraint system with LATCH anchors and a top tether strap ■ Laws and regulations pertaining to anchorages The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifications can be used. This vehicle is designed to conform to the SAE J1819. WARNING ■ When installing a booster seat To prevent the belt from going into ALR lock mode, do not fully extend the shoulder belt.
1-7. Safety information WARNING ■ When installing a child restraint system ● Ensure that the belt and plate are securely locked and the seatbelt is not twisted. ● Shake the child restraint system left and right, and forward and backward to ensure that it has been securely installed. ● When adjusting the front passenger seat position after installing a child restraint system, do so slowly. ● Follow all installation instructions provided by the child restraint system manufacturer.
When driving 2-1. Driving procedures Driving the vehicle............ Push-button ignition switch............................. Engine (ignition) switch .... Automatic transmission.... Manual Transmission....... Turn signal lever .............. Parking brake................... Horn ................................. 146 160 169 172 179 182 183 184 2 2-3. Operating the lights and windshield wipers Headlight switch............... 200 Fog light switch ................ 206 Windshield wipers and washer .........
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driving: ■ Starting the engine →P. 160, 169 ■ Driving Vehicles with an automatic transmission STEP 1 With the brake pedal depressed, shift the select lever to D. (→P. 172) STEP 2 Release the parking brake. (→P. 183) STEP 3 Gradually release the brake pedal and gently depress the accelerator pedal to accelerate the vehicle.
2-1. Driving procedures ■ Parking the vehicle Vehicles with an automatic transmission With the select lever in D, depress the brake pedal. STEP 2 Shift the select lever to P. (→P. 172) STEP 3 Set the parking brake. (→P. 183) STEP 4 Vehicles without a keyless access with push button start system: Turn the engine switch to the “LOCK” position to stop the engine. Vehicles with a keyless access with push button start system: Press the push-button ignition switch to stop the engine.
2-1. Driving procedures Starting off on a steep uphill Vehicles with an automatic transmission STEP 1 Make sure that the parking brake is set and shift the select lever to D. STEP 2 Gently depress the accelerator pedal. STEP 3 Release the parking brake. Vehicles with a manual transmission STEP 1 With the parking brake firmly set and the clutch pedal fully depressed, shift the shift lever to 1. STEP 2 Lightly depress the accelerator pedal at the same time as gradually releasing the clutch pedal.
2-1. Driving procedures ■ New vehicle break-in driving (the first 1000 miles [1600 km]) The performance and long life of your vehicle are dependent on how you handle and care for your vehicle while it is new. Follow these instructions during the first 1000 miles (1600 km): ● Do not allow the engine speed to exceed 4000 rpm except in an emergency. ● Do not drive at one constant engine or vehicle speed for a long time, either fast or slow.
2-1. Driving procedures Parking brake lining STEP 1 Drive the vehicle at a speed of approximately 22 mph (35 km/h). STEP 2 With the parking brake release button pushed in, pull the parking brake lever SLOWLY and GENTLY (pulling with a force of approximately 33.7 lbf [150 N, 15.3 kgf]). STEP 3 Drive the vehicle for approximately 220 yards (200 meters) in this condition. STEP 4 Wait 5 to 10 minutes for the parking brake to cool down. Repeat this procedure. STEP 5 Check the parking brake lever travel.
2-1. Driving procedures WARNING ■ When starting the vehicle (vehicles with an automatic transmission) ● Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. ● Firmly depress the brake pedal because engine speed may increase immediately after starting the engine, when the air conditioning system is operating, when turning the steering wheel, etc., thereby causing creeping to become stronger. Apply the parking brake as necessary.
2-1. Driving procedures WARNING ● On vehicles with a manual transmission, do not shift the shift lever to R while the vehicle is moving forward. Doing so can damage the transmission and may result in a loss of vehicle control. ● Do not shift the select lever to D (vehicles with an automatic transmission) or shift lever to 1 (vehicles with a manual transmission) while the vehicle is moving backward. Doing so can damage the transmission and may result in a loss of vehicle control.
2-1. Driving procedures WARNING ● Always check that all passengers' arms, heads or other parts of their body are not outside the vehicle, as this may result in death or serious injury. ● Do not drive in excess of the speed limit. Even if the legal speed limit permits it, do not drive over 85 mph (140 km/h) unless your vehicle has highspeed capability tires. Driving over 85 mph (140 km/h) may result in tire failure, loss of control and possible injury.
2-1. Driving procedures WARNING ■ If you hear a squealing or scraping noise (brake pad wear limit indicators) Have your SUBARU dealer check and replace the brake pads as soon as possible. Rotor damage may result if the pads are not replaced when needed. It is dangerous to drive the vehicle when the wear limits of the brake pads and/or those of the brake discs are exceeded. (→P. 149) ■ Breaking-in of new brake pads and linings A safe location and situation should be selected for break-in driving.
2-1. Driving procedures WARNING ■ When the vehicle is parked ● Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehicle when it is in the sun. Doing so may result in the following: ● Do not attach suction cups to the windshield or windows. Do not place containers such as air fresheners on the instrument panel or dashboard. Suction cups or containers may act as lenses, causing a fire in the vehicle.
2-1. Driving procedures WARNING ■ Exhaust gases Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Inhaling exhaust gases may lead to death or a serious health hazard. ● If the vehicle is in a poorly ventilated area, stop the engine. In a closed area, such as a garage, exhaust gases may collect and enter the vehicle. This may lead to death or a serious health hazard. ● The exhaust system should be checked occasionally.
2-1. Driving procedures WARNING ■ When braking ● When the brakes are wet, drive more cautiously. Braking distance increases when the brakes are wet, and this may cause one side of the vehicle to brake differently than the other side. Also, the parking brake may not securely hold the vehicle. ● If the power brake assist function does not operate, do not follow other vehicles closely and avoid hills or sharp turns that require braking.
2-1. Driving procedures CAUTION Vehicles with a manual transmission ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain driving torque. ● Do not shift gears unless the clutch pedal is fully depressed. After shifting, do not release the clutch pedal abruptly. Doing so may damage the clutch, transmission and gears. ● Observe the following to prevent the clutch from being damaged. • Do not rest your foot on the clutch pedal while driving.
2-1. Driving procedures CAUTION ■ Replacement of brake pad and lining If you continue to drive despite the scraping noise from the audible brake pad wear indicator, it will result in the need for costly brake rotor repair or replacement. ■ Breaking-in of new brake pads and linings Pulling the parking brake lever too forcefully may cause the rear wheels to lock. To avoid this, be certain to pull the lever up slowly and gently.
2-1. Driving procedures Push-button ignition switch (vehicles with a keyless access with push button start system) Performing the following operations when carrying the access key on your person starts the engine or changes push-button ignition switch modes. ■ Starting the engine Vehicles with an automatic transmission STEP 1 Check that the parking brake is set. STEP 2 Check that the select lever is set in P. If the select lever is not set in P, the engine may not be started. (→P.
2-1. Driving procedures Vehicles with a manual transmission STEP 1 Check that the parking brake is set. STEP 2 Check that the shift lever is set in neutral. STEP 3 Firmly depress the clutch pedal. The keyless access with push button start system indicator light (green) will turn on. If the indicator light does not turn on, the engine cannot be started. STEP 4 Press the push-button ignition switch. Continue depressing the clutch pedal until the engine is completely started.
2-1. Driving procedures ■ Stopping the engine Vehicles with an automatic transmission STEP 1 Stop the vehicle. STEP 2 Shift the select lever to P. STEP 3 Set the parking brake. (→P. 183) STEP 4 Release the brake pedal. STEP 5 Press the push-button ignition switch. STEP 6 Check that the keyless access with push button start system indicator light (green) is off. Vehicles with a manual transmission STEP 1 While depressing the clutch pedal, stop the vehicle.
2-1. Driving procedures ■ Changing push-button ignition switch mode Modes can be changed by pressing the push-button ignition switch with the brake pedal (vehicles with an automatic transmission) or clutch pedal (vehicles with a manual transmission) released. (The mode changes each time the switch is pressed.) Off* The hazard warning flashers can be used. “ACC” mode Some electrical components such as the power outlet can be used.
2-1. Driving procedures When stopping the engine with the select lever in a position other than P (vehicles with an automatic transmission) If the engine is stopped with the select lever in a position other than P, the push-button ignition switch will not be turned off but instead be turned to “ACC” mode. Perform the following procedure to turn the switch off: STEP 1 Check that the parking brake is set. STEP 2 Shift the select lever to P.
2-1. Driving procedures ■ Operation of the push-button ignition switch When operating the push-button ignition switch, one short, firm press is enough. If the switch is pressed improperly, the engine may not start or the push-button ignition switch mode may not change. It is not necessary to press and hold the switch. ■ Access key battery depletion →P. 34 ■ Conditions affecting operation 2 →P. 30 ■ Note for the “keyless access” entry function When driving →P.
2-1. Driving procedures ■ When the steering lock cannot be released The keyless access with push button start system indicator light (green) will flash quickly. Vehicles with an automatic transmission Check that the select lever is set in P. Press the push-button ignition switch while turning the steering wheel left and right. Vehicles with a manual transmission Press the push-button ignition switch while turning the steering wheel left and right.
2-1. Driving procedures WARNING ■ When starting the engine ● Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ● If the keyless access with push button start system indicator light flashes in green after the engine has started, never drive the vehicle. The steering wheel is still locked, and it may result in an accident.
2-1. Driving procedures CAUTION ■ To prevent battery discharge ● Do not leave the push-button ignition switch in “ACC” or “ON” mode for long periods of time without the engine running. ● If the keyless access with push button start system indicator light (green) is illuminated, the push-button ignition switch is not off. When exiting the vehicle, always check that the push-button ignition switch is off.
2-1. Driving procedures Engine (ignition) switch (vehicles without a keyless access with push button start system) ■ Starting the engine Vehicles with an automatic transmission STEP 1 Check that the parking brake is set. STEP 2 Check that the select lever is set in P. STEP 3 Firmly depress the brake pedal. STEP 4 Turn the engine switch to the “START” position to start the engine. 2 Vehicles with a manual transmission Check that the parking brake is set.
2-1. Driving procedures ■ Turning the key from “ACC” to “LOCK” STEP 1 Vehicles with an automatic transmission: Shift the select lever to P. (→P. 172) Vehicles with a manual transmission: Shift the shift lever to neutral. (→P. 179) STEP 2 Push in the key and turn to the “LOCK” position. ■ If the engine does not start Remove the key and try again. If the engine does not start, the engine immobilizer system may not have been deactivated. (→P. 77) Contact your SUBARU dealer.
2-1. Driving procedures WARNING ■ When starting the engine Always start the engine while sitting in the driver's seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■ Caution when driving CAUTION ■ To prevent battery discharge Do not leave the engine switch in the “ACC” or “ON” position for long periods of time without the engine running.
2-1. Driving procedures Automatic transmission∗ Select a shift position appropriate for the driving conditions. ■ Shifting the select lever Vehicles without a keyless access with push button start system While the engine switch is in the “ON” position, move the select lever with the brake pedal depressed. When shifting the select lever between P and D, make sure that the vehicle is completely stopped.
2-1. Driving procedures ■ Shift position uses Shift position Meter display Function P Parking the vehicle/starting the engine R Reversing N Neutral 2 When driving Normal D position driving* (gears between “1” and “6” are automatically selected) D Temporary manual mode driving (→P. 177) (paddle shift levers activated) M Manual mode driving (→P. 175) *: Shifting to the D position allows the system to select a gear suitable for the driving conditions.
2-1. Driving procedures ■ Selecting a driving mode By pressing the driving pattern selector switch the following modes can be selected to suit driving and usage conditions: Normal mode Sport mode The “SPORT” indicator comes on. Use sport mode for sporty driving or when driving in mountainous regions with lots of curves. Snow mode The “SNOW” indicator comes on. Use snow mode for accelerating and driving on slippery road surfaces such as snow.
2-1. Driving procedures Manual mode driving To enter manual mode, shift the select lever to the M position. While the upshift/downshift indicator light is illuminated, gears can be selected by operating the select lever or paddle shift levers, allowing you to drive in the gear of your choosing. Even if upshifting operations are performed, if vehicle speed is too low for the requested gear, the gear will not change.
2-1. Driving procedures ■ When moving the select lever out of P If the select lever is pushed sideways before the brake pedal is depressed, select lever operation may not be possible. Depress the brake pedal before shifting the select lever out of P.
2-1. Driving procedures ■ Automatic gear selection when the vehicle is stopped When the vehicle is idling at high rpm in order to warm up, and the vehicle is on a slippery road, the transmission may automatically shift to 2nd gear for stopping and starting off. ■ Temporary manual mode driving Temporary manual mode driving can be changed to by operating the paddle shift levers while the select lever is in the D position.
2-1. Driving procedures ■ Adaptive control In order to realize smoother driving while driving in D position, an appropriate gear is automatically selected by limiting upshifting and performing downshifting operations according to driver operations and driving conditions. ● When driving uphill, prevents unnecessary upshifting and downshifting. ● When driving downhill, downshifting is performed at engine speeds higher than usual. ● When driving on curves, prevents upshifting even when accelerating.
2-1. Driving procedures Manual Transmission∗ ■ Shifting the shift lever 2 ■ Shifting the shift lever to R Shift the shift lever to R while lifting up the ring section. ∗: If equipped 179 When driving Fully depress the clutch pedal before operating the shift lever, and then release it slowly.
2-1. Driving procedures Shift-up indicator To help enable fuel-efficient driving, the shift-up indicator flashes 3 times to indicate upshift timing. The indicator’s default setting is off. The indicator can be turned on/off. (→P.
2-1. Driving procedures CAUTION ■ To prevent damage to the transmission ●Do not shift the shift lever without depressing the clutch pedal. 2 When driving ● Do not lift up the ring section except when shifting the lever to R. ● Shift the shift lever to R only when the vehicle is stationary and the clutch pedal is fully depressed.
2-1. Driving procedures Turn signal lever The turn signal lever can be used to show the following intentions of the driver: Right turn Left turn Lane change to the right (push and hold the lever partway) The right hand signals will flash until you release the lever. Lane change to the left (push and hold the lever partway) The left hand signals will flash until you release the lever.
2-1. Driving procedures Parking brake U.S.A. Canada 2 To release the parking brake, slightly raise the lever and lower it completely while pressing the button. ■ Usage in winter time →P. 226 CAUTION ■ Before driving Fully release the parking brake. Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear.
2-1. Driving procedures Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
2-2. Instrument cluster Gauges and meters 2 When driving Analog Speedometer Displays the vehicle speed. Tachometer Displays the engine speed in revolutions per minute. Digital Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank. Engine coolant temperature gauge Displays the engine coolant temperature. Odometer, trip meter and multi-information display Odometer: Displays the total distance the vehicle has been driven.
2-2. Instrument cluster “DISP” switch →P. 196 “ODO/TRIP” switch →P. 187 “km/h MPH” switch Each time the switch is pressed, the display inside the meter changes between km/h and MPH.
2-2. Instrument cluster Switch the display Each time the “ODO/TRIP” switch is pressed, the display changes as follows. 2 When driving Odometer Trip meter A*1 Trip meter B*1 Setting screen for tachometer indicator needle movement function when starting the vehicle*2 Setting screen for the shift position indicator and shift-up indicator*2 (vehicles with a manual transmission) *1:Pressing and holding the “ODO/TRIP” switch will reset the trip meter that is currently displayed.
2-2. Instrument cluster Tachometer indicator needle movement function when starting the vehicle When the engine switch is turned to “ON” position (vehicles without a keyless access with push button start system), or the push-button ignition switch is turned to “ON” mode (vehicles with a keyless access with push button start system), the tachometer indicator needle points to the highest value once and then quickly returns.
2-2. Instrument cluster Instrument panel light control The brightness of the instrument panel lights can be adjusted. Brighter Darker 2 When driving ■ The brightness of the instrument panel lights When the parking lights or the headlights turn on, the instrument panel lights will dim. However, when the instrument panel brightness control dial is turned to the up most position, the instrument panel lights will not dim even when the parking lights or headlights turn on.
2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustration displays all indicators and warning lights illuminated.
2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Shift position indicator (→P. 179) Turn signal indicator (→P. 182) (Vehicles with a manual transmission) Shift-up indicator (→P. 180) Headlight high beam indicator (→P. 201) 2 (Vehicles with a manual transmission) *1, 2 When driving Front fog light indicator (→P. 206) Slip indicator (→P. 215) (If equipped) (If equipped) Security indicator (→P.
2-2. Instrument cluster *3 Airbag on-off indicator (→P. 122) *1: Vehicles without a keyless access with push button start system These lights turn on when the engine switch is turned to the “ON” position to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your SUBARU dealer.
2-2. Instrument cluster ■ Warning lights Warning lights inform the driver of malfunctions in any of the vehicle’s systems. (→P. 364) *1 *1 *1 *1 *4 *4 *1 *1 *1 (U.S.A.) (Canada) (U.S.A.) (Canada) *1 *1 *2 *3 *1 (for front passenger) 2 (for driver) When driving (U.S.A.
2-2. Instrument cluster *4: Vehicles without a keyless access with push button start system These lights turn on when the engine switch is turned to the “ON” position to indicate that a system check is being performed. They will turn off after the engine is started. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your SUBARU dealer for details.
2-2. Instrument cluster Multi-information display The multi-information display presents the driver with a variety of driving-related data, including the current outside air temperature.
2-2. Instrument cluster Switch the display Each time the “DISP” switch is pressed, the display changes as follows. Outside temperature →P. 263 Current fuel consumption Displays the current rate of fuel consumption. Average fuel consumption Displays the average fuel consumption since the function was reset. • The function can be reset by pushing the “DISP” switch for longer than one second when the average fuel consumption is displayed. • Use the displayed average fuel consumption as a reference.
2-2. Instrument cluster Setting the REV indicator ■ Changing the REV indicator settings The engine speed at which the REV indicator turns on at and whether a buzzer sounds or not when the light turns on can be set. Engine speed setting range: From 2000 to 7400 rpm (r/min) STEP 1 Press the “DISP” switch repeatedly until the setting screen is displayed. (→P. 196) hold the “DISP” “REV.” and the thousandth place flash. After flashing, the number changes each time the button is pressed and held.
2-2. Instrument cluster Press and switch. STEP 5 hold the “DISP” Each time the “DISP” switch is pressed and held, the buzzer changes between activated and deactivated. ”b-on”: Buzzer activated ”b-oFF”: Buzzer deactivated When the setting changes from “b-oFF” to “b-on”, the buzzer sounds 3 times. STEP 6 Press the “DISP” switch. When the buzzer sounds, all settings have been completed. The settings are displayed.
2-2. Instrument cluster ■ The multi-information display operate when Vehicles without a keyless access with push button start system The engine switch is in the “ON” position. Vehicles with a keyless access with push button start system The push-button ignition switch is in “ON” mode. WARNING 2 ■ The information display at low temperatures 199 When driving Allow the interior of the vehicle to warm up before using the liquid crystal information display.
2-3. Operating the lights and windshield wipers Headlight switch The headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows: Off The daytime running lights turn on. The headlights, parking, daytime running lights and so on turn on and off automatically.
2-3. Operating the lights and windshield wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. You can flash the high beams with the headlights on or off. 201 2 When driving Pull the lever toward you and release it to flash the high beams once.
2-3. Operating the lights and windshield wipers Manual headlight leveling dial The level of the headlights can be adjusted according to the number of passengers and the loading condition of the vehicle.
2-3. Operating the lights and windshield wipers ■ Daytime running light system ● Vehicles with an automatic transmission: To make your vehicle more visible to other drivers, the daytime running lights turn on automatically whenever the engine is started, the select lever is shifted out of P and the parking brake is released. Daytime running lights are not designed for use at night.
2-3. Operating the lights and windshield wipers ■ Automatic light off system Vehicles without a keyless access with push button start system The light switch is in , the headlights and tail lights turn off 30 seconds after a door is opened and closed if the key is removed from the engine switch. (The lights turn off immediately if on the key is pressed after all the doors are locked.) To turn the lights on again, turn the engine switch to the “ON” position, or turn the lights off and then back to or .
2-3. Operating the lights and windshield wipers ■ Battery-saving function In the following conditions, the headlights and the other remaining lights will go off automatically after 20 minutes in order to prevent the vehicle battery from being discharged: ● The headlights and/or tail lights are on.
2-3. Operating the lights and windshield wipers Fog light switch∗ The fog lights secure excellent visibility in difficult driving conditions, such as in rain and fog. Turns the front fog lights off Turns the front fog lights on ■ Fog lights can be used when The headlights are on in low beam.
2-3. Operating the lights and windshield wipers Windshield wipers and washer When intermittent windshield wiper operation is selected, the wiper interval can be adjusted. The wiper operation is selected by moving the lever as follows.
2-3. Operating the lights and windshield wipers Washer/wiper dual operation The wipers will automatically operate a couple of times after the washer squirts. ■ The windshield wipers and washer can be operated when Vehicles without a keyless access with push button start system The engine switch is in the “ON” position. Vehicles with a keyless access with push button start system The push-button ignition switch is in “ON” mode.
2-3. Operating the lights and windshield wipers CAUTION ■ When the windshield is dry Do not use the wipers, as they may damage the windshield. ■ When the washer fluid tank is empty Do not operate the switch continually as the washer fluid pump may overheat. ■ When a nozzle becomes blocked 2 In this case, contact your SUBARU dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
2-4. Using other driving systems Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch ■ Setting the vehicle speed STEP 1 Press the “ON-OFF” button to activate the cruise control. Cruise control indicator (green) will come on. Press the button again to deactivate the cruise control. STEP 2 Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed. “SET” indicator will come on.
2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction. The set speed will be increased or decreased as follows: Fine adjustment (U.S.A.): By approximately 1 mph (1.6 km/h) each time the lever is operated. Fine adjustment (Canada): By approximately 0.6 mph (1 km/h) each time the lever is operated.
2-4. Using other driving systems ■ Canceling and resuming the constant speed control Pulling the lever toward you cancels the constant speed control. The speed setting is also canceled when: • The brakes are applied. • The clutch pedal is depressed (manual transmission only). Pushing the lever up resumes the constant speed control. Resuming is available when the vehicle speed is more than approximately 20 mph (32 km/h).
2-4. Using other driving systems ■ Accelerating after setting the vehicle speed ● The vehicle can be accelerated normally. After acceleration, the set speed resumes. ● Even without canceling the cruise control, the set speed can be increased by first accelerating the vehicle to the desired speed and then pushing the lever down to set the new speed. ■ Automatic cruise control cancelation Cruise control will stop maintaining the vehicle speed in any of the following situations.
2-4. Using other driving systems WARNING ■ Cruise control precaution (vehicles with an automatic transmission) You can cancel the cruise control by shifting the select lever into the N position. However, do not shift the lever into the N position while driving except in case of emergency. If the select lever is shifted into the N position, the engine brake will no longer work. This could result in an accident.
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle.
2-4. Using other driving systems Disabling the TRAC system If the vehicle gets stuck in mud, dirt or snow, the TRAC system may reduce power from the engine to the wheels. Pressing to turn the system off may make it easier for you to rock the vehicle in order to free it. In this case, the brake LSD function remains on. To turn the TRAC system off, quickly press and release the button. The Traction Control System OFF indicator light will come on. Press the button again to turn the system back on.
2-4. Using other driving systems Vehicle stability control (VSC) SPORT mode Your vehicle is equipped with two types of control modes to accommodate various driving preferences. The control modes can be selected with the “VSC SPORT” switch. Normal mode allows secure and smooth normal driving. When the switch is pressed, Vehicle stability control (VSC) SPORT mode is activated.
2-4. Using other driving systems ■ Turning off both TRAC and Vehicle stability control (VSC) systems To turn the TRAC and Vehicle stability control (VSC) systems off, press and hold for more than 3 seconds while the vehicle is stopped. The Traction Control System OFF indicator light and the Vehicle stability control (VSC) off indicator light will come on. In this case, the brake LSD function remains on. Press the button again to turn the systems back on.
2-4. Using other driving systems ● Any of the following conditions may occur when the above systems are operating. None of these indicates that a malfunction has occurred. • • • • Vibrations may be felt through the vehicle body and steering. A motor sound may be heard after the vehicle comes to a stop. The brake pedal may pulsate slightly after the ABS is activated. The brake pedal may move down slightly after the ABS is activated.
2-4. Using other driving systems WARNING ■ TRAC may not operate effectively when Directional control and power may not be achievable while driving on slippery road surfaces, even if the TRAC system is operating. Do not drive the vehicle in conditions where stability and power may be lost. ■ When the Vehicle stability control (VSC) and/or brake LSD function is activated The slip indicator light flashes. Always drive carefully. Reckless driving may cause an accident.
2-5. Driving information Cargo and luggage Take notice of the following information about storage precautions, cargo capacity and load: ● Stow cargo and luggage in the trunk whenever possible. ● Be sure all items are secured in place. ● To maintain vehicle balance while driving, position luggage evenly within the luggage compartment. 2 ● For better fuel economy, do not carry unnecessary weight. When driving Capacity and distribution Cargo capacity depends on the total weight of the occupants.
2-5. Driving information (6)If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. (→P. 410) SUBARU does not recommend towing a trailer with your vehicle. Your vehicle is not designed for trailer towing. Example on your vehicle Cargo capacity Total load capacity When 2 people with the combined weight of 366 lb.
2-5. Driving information WARNING ■ Things that must not be carried in the trunk The following things may cause a fire if loaded in the trunk: ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failure to do so may result in death or serious injury. 2 ● To prevent cargo and luggage from sliding forward during braking, do not stack anything in the enlarged trunk. Keep cargo and luggage low, as close to the floor as possible.
2-5. Driving information WARNING ■ Capacity and distribution ● Do not exceed the maximum axle weight rating or the total vehicle weight rating. ● Even if the total load of occupant's weight and the cargo load is less than the total load capacity, do not apply the load unevenly. Improper loading may cause deterioration of steering or braking control which may cause death or serious injury.
2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, towing capacity and cargo capacity. ■ Total load capacity Total load capacity means the combined weight of occupants, cargo and luggage. ■ Seating capacity Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb. (68 kg) per person. ■ Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occupants.
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside temperatures. • Engine oil • Washer fluid ● Have a service technician inspect the condition of the battery. ● Have the vehicle fitted with four snow tires.
2-5. Driving information ● If a door is opened and closed when its side window is frozen, the window safety device will operate and the side window open/close function linked to door operation may not operate correctly. If this occurs, perform the following after the ice has melted. Open the side window until it is approximately halfway open with the door closed.
2-5. Driving information Tire chains Tire chains cannot be used on your vehicle because of the lack of clearance between the tires and vehicle body. When tire chains cannot be used, use of another type of traction device (such as spring chains) may be acceptable if use on your vehicle is recommended by the device manufacturer, taking into account tire size and road conditions. Follow the device manufacturer's instructions, especially regarding maximum vehicle speed.
2-5. Driving information ■ Refueling in cold weather To help prevent moisture from forming in the fuel system and the risk of its freezing, use of an antifreeze additive in the fuel tank is recommended during cold weather. Use only additives that are specifically designed for this purpose. When an antifreeze additive is used, its effect lasts longer if the tank is refilled whenever the fuel level reaches half empty. 2 WARNING Observe the following precautions to reduce the risk of accidents.
2-5. Driving information Trailer towing Your vehicle is neither designed nor intended to be used for trailer towing. Therefore, never tow a trailer with your vehicle. SUBARU assumes no responsibility for injuries or vehicle damage that may result from trailer towing, from any trailer towing equipment or from any errors or omissions in the instructions accompanying such equipment. SUBARU warranties do not apply to vehicle damage or malfunction caused by trailer towing.
2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed behind a motor home or other vehicle with the wheels (2 or 4) on the ground. Serious damage can result.
2-5.
Interior features 3-1. Using the air conditioning system and defogger Manual air conditioning system ........................... 234 Automatic air conditioning system ....... 241 Rear window and outside rear view mirror defoggers....................... 250 3 3-5. Other interior features Sun visors ........................ Vanity mirrors................... Clock ................................ Outside temperature display............................ Power outlets ................... Seat heaters...........
3-1. Using the air conditioning system and defogger Manual air conditioning system∗ Air outlet selection dial Temperature control dial Outside air or recirculated air mode Air conditioning on/off button Fan speed control dial Adjusting the settings STEP 1 To adjust the fan speed, turn the fan speed control dial clockwise (increase) or counterclockwise (decrease). Turning the dial to “0” turns off the fan.
3-1. Using the air conditioning system and defogger Defogging the windshield STEP 1 Set the air outlet selection dial to position. The air intake is automatically switched to outside air mode. It is not possible to return to recirculated air mode when the switch is on. STEP 2 Perform the following operations accordingly: 3 ● To adjust the fan speed, turn the fan speed control dial. ● If the dehumidification function is not operating, press to operate the dehumidification function.
3-1. Using the air conditioning system and defogger ■ Air outlets and air flow Air flows to the upper body. Air flows to the upper body and feet. Air flows to the feet. Air flows to the feet and the windshield defogger operates. The air intake is automatically switched to outside air mode. It is not possible to return to recirculated air mode when the switch is on.
3-1. Using the air conditioning system and defogger Switching between outside air and recirculated air modes Press . The mode switches between outside air mode (introduces air from outside the vehicle) (indicator off) and recirculated air mode (recycles air inside the vehicle) (indicator on) each time the button is pressed. Adjusting the position of the air outlets Center outlets Direct air flow to the left or right, up or down.
3-1. Using the air conditioning system and defogger Opening and closing the air outlets Center outlets Open the air outlet. Close the air outlet. Right and left side outlets Open the vent. Close the vent.
3-1. Using the air conditioning system and defogger ■ For quick cooling Turn the temperature control dial to the “MAX A/C” position and select the recirculated air mode. ■ Fogging up of the windows ● The windows will easily fog up when the humidity in the vehicle is high. Turning on will dehumidify the air from the outlets and defog the windshield effectively. ● If you turn off, the windows may fog up more easily. ● The windows may fog up if the recirculated air mode is used.
3-1. Using the air conditioning system and defogger WARNING ■ To prevent the windshield from fogging up Do not set the air outlet selection dial to during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision. CAUTION ■ To prevent battery discharge Do not leave the air conditioning system on longer than necessary when the engine is stopped.
3-1. Using the air conditioning system and defogger Automatic air conditioning system∗ Air outlets, fan speed, air inlet control and the air conditioner compressor are automatically operated.
3-1. Using the air conditioning system and defogger Using the automatic air conditioning system STEP 1 Press . The dehumidification function begins to operate. Air outlets, fan speed, air inlet control and the air conditioner compressor are automatically adjusted according to the temperature setting. STEP 2 Turn temperature control dial clockwise to increases the temperature and turn temperature control dial counterclockwise to decreases the temperature on the driver’s side.
3-1. Using the air conditioning system and defogger Adjusting the settings manually STEP 1 To adjust the fan speed, turn the fan speed control dial clockwise (increase) or counter-clock wise (decrease). Press STEP 2 to turn the fan off. To adjust the temperature settings, turn the temperature control dial clockwise (warm) or counter-clock wise (cool).
3-1. Using the air conditioning system and defogger Defogging the windshield Press . The dehumidification function operates and fan speed increases. Set the outside/recirculated air mode button to outside air mode if the recirculated air mode is used. (It may switch automatically.) To defog the windshield and the side windows early, turn the air flow and temperature up. To return to the previous mode, press again when the windshield is defogged.
3-1. Using the air conditioning system and defogger Air outlets and air flow Air flows to the upper body. Air flows to the upper body and feet. 3 Interior features Air flows to the feet. Air flows to the feet and the windshield defogger operates. If the recirculated air mode is used, it may automatically switch to the outside air mode.
3-1. Using the air conditioning system and defogger Switching between outside air mode and recirculated air mode Press . The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) each time is pressed. Adjusting the position of the air outlets Center outlets Direct air flow to the left or right, up or down. Right and left side outlets Direct air flow to the left or right, up or down.
3-1. Using the air conditioning system and defogger Opening and closing the air outlets Center outlets Open the air outlet. Close the air outlet. 3 Right and left side outlets Open the vent. Interior features Close the vent.
3-1. Using the air conditioning system and defogger ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed. ■ Fogging up of the windows ● The windows will easily fog up when the humidity in the vehicle is high. Turning on will dehumidify the air from the outlets and defog the windshield effectively.
3-1. Using the air conditioning system and defogger ■ Air conditioning odors ● During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents. ● To reduce potential odors from occurring: • It is recommended that the air conditioning system be set to outside air mode prior to turning the vehicle off.
3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers The rear window defogger is used to defog the rear window. The outside rear view mirror defoggers* are used to remove frost, dew or raindrops from the outside rear view mirrors. Vehicles with a manual air conditioning system On/off The defoggers will automatically turn off after approximately 15 minutes.
3-1. Using the air conditioning system and defogger ■ The defoggers can be operated when Vehicles without a keyless access with push button start system The engine switch is in the “ON” position. Vehicles with a keyless access with push button start system The push-button ignition switch is in “ON” mode. ■ The outside rear view mirror defoggers (vehicles with outside rear view mirror defoggers) Turning the rear window defogger on will turn the outside rear view mirror defoggers on.
3-2. Using the audio system Using the AUX/USB port∗ This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. For more information, please refer to the “Navigation System Owner's Manual”. Open the cover and connect the portable audio device. ■ Operating portable audio devices connected to the audio system The volume and sound quality can be adjusted using the vehicle’s audio controls. All other adjustments must be made on the portable audio device itself.
3-3. Using the interior lights Interior lights list 3 Engine switch light (vehicles without a keyless access with push button start system) Push-button ignition switch light (vehicles with a keyless access with push button start system) Door courtesy lights (if equipped) 253 Interior features Interior light (→P.
3-3. Using the interior lights Interior light Interior light Turns the light off Turns light on when door is open Turns the light on ■ Illuminated entry system Vehicles without a keyless access with push button start system The lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are open/ closed.
3-4. Using the storage features List of storage features 3 Interior features Glove box Bottle holders Cup holders/console tray WARNING ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ● Glasses may be deformed by heat or cracked if they come into contact with other stored items. ● Lighters or spray cans may explode.
3-4. Using the storage features Glove box Glove box Pull up the lever to open the glove box. WARNING ■ Caution while driving Keep the glove box closed. In the event of sudden braking or sudden swerving, an accident may occur due to an occupant being struck by the open glove box or the items stored inside.
3-4. Using the storage features Bottle holders Bottle holders ■ When using the bottle holder 3 ● When storing a bottle, close the cap. Interior features ● The bottle may not be stored depending on its size or shape. WARNING ■ Items unsuitable for the bottle holder Do not place anything other than a PET bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
3-4. Using the storage features Cup holders/console tray Cup holders/console tray ■ Changing the cup holder position Remove the cup holder and change the holder position. ■ Changing the console tray size Remove the cup holder.
3-4. Using the storage features Cup holders/console tray WARNING ■ Caution while driving Observe the following precautions. Failure to do so may cause an accident resulting in death or serious injury. ● Before driving, place the cup holder in the rear position so that it does not hinder select lever or shift lever operation. ●When placing the cup holder, make sure it is facing the correct direction.
3-5. Other interior features Sun visors To set the visor in the forward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side.
3-5. Other interior features Vanity mirrors Open the cover to use. Vehicles with vanity lights: The light turns on when the cover is opened. CAUTION 3 ■ To prevent battery discharge (vehicles with vanity lights) 261 Interior features Do not leave the vanity lights on for extended periods while the engine is off.
3-5. Other interior features Clock The clock can be adjusted by pressing the buttons. Adjusts the hours Adjusts the minutes Rounds hour* to the nearest *: e.g.1:00 to 1:29 → 1:00 00 1:30 to 1:59 → 2:00 ■ The clock is displayed when Vehicles without a keyless access with push button start system The engine switch is in the “ACC” or “ON” position. Vehicles with a keyless access with push button start system The push-button ignition switch is in “ACC” or “ON” mode.
3-5. Other interior features Outside temperature display The temperature display shows temperatures within the range of -40°F (-40°C) and 122°F (50°C). The outside temperature display can be switched by pressing the “DISP” switch. (→P. 196) 3 Interior features ■ The outside temperature is displayed when Vehicles without a keyless access with push button start system The engine switch is in the “ON” position.
3-5. Other interior features Power outlets The power outlet can be used for 12 V accessories that run on 10 A or less.
3-5. Other interior features ■ The power outlet can be used when Vehicles without a keyless access with push button start system The engine switch is in the “ACC” or “ON” position. Vehicles with a keyless access with push button start system The push-button ignition switch is in “ACC” or “ON” mode. CAUTION ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short circuit.
3-5. Other interior features Seat heaters∗ Press the switch to warm the seats. The indicator light comes on when a seat heater is turned on. Rapid heating Normal heating ■ The seat heaters can be used when The push-button ignition switch is in “ON” mode. ■ When not in use Turn the seat heater off. The indicator light goes off.
3-5. Other interior features WARNING ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically challenged • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold remedies, etc.) ● Do not cover the seat with anything when using the seat heater.
3-5. Other interior features Floor mat∗ Make sure to only use floor mats that are specifically designed for use with the same model and model year as your vehicle. Fix them securely in place on top of the carpet. STEP 1 Insert the retaining hooks (clips) into the floor mat eyelets. STEP 2 Turn the upper knob of each retaining hook (clip) to secure the floor mats in place. * *: Always align the ∆ marks. The shape of the retaining hooks (clips) may differ from that shown in the illustration.
3-5. Other interior features WARNING Observe the following precautions. Failure to do so may cause the driver's floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehicle, leading to a serious accident. ■ When installing the driver's floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are SUBARU Genuine floor mats.
3-5.
Maintenance and care 4-1. Maintenance and care Cleaning and protecting the vehicle exterior......... 272 Cleaning and protecting the vehicle interior.......... 276 Cleaning and protecting the Alcantara® area ....... 280 4-2. Maintenance Maintenance requirements.................. 282 General maintenance....... 285 Emission inspection and maintenance (I/M) programs........................ 288 4 4-3. Do-it-yourself maintenance Do-it-yourself service precautions .................... Engine hood...............
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. ● Wash the vehicle body using a sponge or soft cloth, such as a chamois. ● For hard-to-remove marks, use car wash soap and rinse thoroughly with water. ● Wipe away any water.
4-1. Maintenance and care ■ Automatic car washes ● Fold the mirrors and remove the antenna before washing the vehicle. Start washing from the front of the vehicle. Make sure to re-install the antenna and extend the mirrors before driving. ● When having your vehicle washed in an automatic car wash, make sure beforehand that the car wash is of suitable type to avoid scratches to the vehicle surface and harm to your vehicle’s paint.
4-1. Maintenance and care WARNING ■ When washing the vehicle ● Do not wash the engine compartment and area adjacent to it. If water enters the engine air intake or electrical parts it will cause engine trouble or a malfunction of the power steering. ● When washing the vehicle, the brakes may get wet. As a result, the brake stopping distance will be longer. To dry the brakes, drive the vehicle at a safe speed while lightly depressing the brake pedal to heat up the brakes.
4-1. Maintenance and care CAUTION ■ Cleaning the exterior lights ● Wash carefully. Do not use organic substances or scrub with a hard brush. This may damage the surfaces of the lights. ● Do not apply wax on the surfaces of the lights. Wax may cause damage to the lenses. ■ Antenna installation and removal precautions ● Before driving, ensure that the antenna is installed.
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior ● Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water. ● When the interior is extremely dirty, wipe away the dirt using a soft cloth slightly dampened with diluted neutral detergent.
4-1. Maintenance and care ■ Caring for leather areas SUBARU recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not apply water. Excellent results are obtained by keeping the carpet as dry as possible. ■ Seatbelts Clean with mild soap and lukewarm water using a cloth or sponge.
4-1. Maintenance and care CAUTION ■ Cleaning detergents ● Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. ● Do not use polish wax or polish cleaner. The instrument panel's or other interior part’s painted surface may be damaged.
4-1. Maintenance and care CAUTION ■ Cleaning the inside of the rear window ● Be careful not to scratch or damage the heater wires. ● Do not use glass cleaner to clean the rear window, as this may cause damage to the rear window defogger heater wires. Use a cloth dampened with lukewarm water to gently wipe the window clean. Wipe the window in strokes running parallel to the heater wires.
4-1. Maintenance and care Cleaning and protecting the Alcantara® area∗ The following procedures will protect and keep your vehicle’s Alcantara® upholstery in top condition: ■ Day-to-day cleaning Perform the following procedures regularly (approximately once a month). STEP 1 Wipe the entire Alcantara® area with a soft cloth that has been dampened with lukewarm water (approximately 104°F [40°C]) and squeezed out. Do not wipe too hard. Doing so may make the Alcantara® upholstery surface become uneven.
4-1. Maintenance and care STEP 2 If the Alcantara® upholstery surface becomes uneven, lightly brush it with a soft brush. STEP 3 Allow the surface to dry completely. ■ Oil stains You will need the following items: ● A cloth that has been dampened with benzene ● A dry cloth STEP 1 Using a dry cloth or tissue paper, wipe away as much of the oil as possible to prevent the stained area from expanding.
4-2. Maintenance Maintenance requirements To ensure safe and economical driving, day-to-day care and regular maintenance is essential. It is the owner’s responsibility to perform regular checks. SUBARU recommends the following maintenance. ■ General maintenance Should be performed on a daily basis. This can be done by yourself or by a SUBARU dealer. ■ Scheduled maintenance Should be performed at specified intervals according to the maintenance schedule.
4-2. Maintenance ■ Allow inspection and repairs to be performed by a SUBARU dealer ● SUBARU technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle. ● Keep a copy of the repair order. It proves that the maintenance that has been performed is under warranty coverage. If any problem should arise while your vehicle is under warranty, your SUBARU dealer will promptly take care of it.
4-2. Maintenance WARNING ■ If your vehicle is not properly maintained It could result in serious damage to the vehicle and possible serious injury or death. ■ Warning in handling of battery ● Before beginning work on or near any battery, be sure to extinguish all cigarettes, matches, and lighters. Never expose a battery to an open flame or electric sparks. Batteries give off a gas which is highly flammable and explosive.
4-2. Maintenance General maintenance Listed below are the general maintenance items that should be performed at the intervals specified in the “Warranty and Maintenance Booklet”. It is recommended that any problem you notice should be brought to the attention of your SUBARU dealer or qualified service shop for advice. Engine compartment Items Check points Check the connections. (→P. 302) Brake fluid At the correct level? (→P. 300) Engine coolant At the correct level? (→P.
4-2.
4-2.
4-2. Maintenance Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system monitors the operation of the emission control system. ■ If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your SUBARU dealer to service the vehicle.
4-3. Do-it-yourself maintenance Do-it-yourself service precautions If you perform maintenance yourself, be sure to follow the correct procedure as given in these sections. Items Parts and tools (→P. 300) • FMVSS No.116 fresh DOT 3 or DOT 4 brake fluid • Rag or paper towel • Funnel (used only for adding brake fluid) (→P. 298) • SUBARU Super Coolant or similar high-quality ethylene glycolbased non-silicate, non-amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
4-3. Do-it-yourself maintenance Items Light bulbs Parts and tools (→P. 337) Radiator and condenser (→P. 300) 290 • Bulb with same number and wattage rating as original • Phillips-head screwdriver • Flathead screwdriver Tire inflation pressure (→P. 315) • Tire pressure gauge • Compressed air source Washer fluid • Water washer fluid containing antifreeze (for winter use) • Funnel (→P.
4-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working in the engine compartment ● Keep hands, clothing, and tools away from the moving fan and engine drive belt. ● Be careful not to touch the engine, radiator, exhaust manifold, etc. right after driving as they may be hot. Oil and other fluids may also be hot.
4-3. Do-it-yourself maintenance Engine hood Release the lock from the inside of the vehicle to open the engine hood. STEP 1 Pull the engine hood release lever. The engine hood will pop up slightly. STEP 2 Push the auxiliary catch lever to the left and lift the engine hood. STEP 3 Hold the engine hood open by inserting the supporting rod into the slot.
4-3. Do-it-yourself maintenance WARNING ■ Pre-driving check Check that the engine hood is fully closed and locked. If the engine hood is not locked properly it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. CAUTION ■ When opening the engine hood Do not lift up or operate the wipers. Doing so may cause the engine hood and wipers to contact, scratching the engine hood.
4-3. Do-it-yourself maintenance Engine compartment Battery (→P. 302) Engine oil level dipstick (→P. 295) Washer fluid tank (→P. 306) Electric cooling fans Brake fluid reservoir (→P. 300) Condenser (→P. 300) Radiator (→P. 300) Engine oil filler cap (→P. 296) Engine coolant reservoir (→P. 298) Fuse box 294 (→P.
4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil STEP 1 Park the vehicle on level ground. After warming up the engine and turning it off, wait more than five minutes for the oil to drain back into the bottom of the engine. STEP 2 Hold a rag under the end and pull the dipstick out. 4 Wipe the dipstick clean. STEP 4 Reinsert the dipstick fully.
4-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil. Engine oil selection Oil quantity (Low → Full) Items →P. 414 1.1 qt. (1.0 L, 0.9 Imp. qt.) Clean funnel STEP 1 Remove the oil filler cap by turning it counterclockwise. STEP 2 Add engine oil slowly, checking the dipstick.
4-3. Do-it-yourself maintenance ■ Engine oil consumption ● The amount of engine oil consumed depends on the oil viscosity, the quality of the oil and the way the vehicle is driven. ● More oil is consumed under driving conditions such as high speeds and frequent acceleration and deceleration. ● A new engine consumes more oil. ● When judging the amount of oil consumption, keep in mind that the oil may have become diluted, making it difficult to judge the true level accurately.
4-3. Do-it-yourself maintenance CAUTION ■ To prevent serious engine damage Check the oil level on a regular basis. ■ When replacing the engine oil ● Be careful not to spill engine oil on the vehicle components. ● Avoid overfilling, or the engine could be damaged. ● Check the oil level on the dipstick every time you fill the oil. ● Be sure the engine oil filler cap is properly tightened.
4-3. Do-it-yourself maintenance ■ Coolant selection Only use SUBARU Super Coolant or similar high-quality ethylene glycolbased non-silicate, non-amine, non-nitrite, and non-borate coolant with longlife hybrid organic acid technology. SUBARU Super Coolant is a mixture of 50% coolant and 50% deionized water. (Enabled: -31°F [-35°C]) For more details about engine coolant, contact your SUBARU dealer. WARNING ■ When the engine is hot Do not remove the radiator cap.
4-3. Do-it-yourself maintenance Radiator and condenser Check the radiator and condenser and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your SUBARU dealer. WARNING ■ When the engine is hot Do not touch the radiator or condenser as they may be hot and cause serious injuries, such as burns. Brake fluid ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank.
4-3. Do-it-yourself maintenance ■ Adding fluid Make sure to check the fluid type and prepare the necessary items. Fluid type Items FMVSS No.116 fresh DOT 3 or DOT 4 brake fluid Clean funnel ■ Brake fluid can absorb moisture from the air Excess moisture in the fluid can cause a dangerous loss of braking efficiency. Use only newly opened brake fluid. WARNING ■ When filling the reservoir Take care because brake fluid can harm your hands or eyes and damage painted surfaces.
4-3. Do-it-yourself maintenance Battery Check the battery as follows. ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Hold-down clamp Terminals ■ Checking battery fluid Check that the level is between “UPPER LEVEL” and “LOWER LEVEL”. “UPPER LEVEL” “LOWER LEVEL” If the fluid level is at or below “LOWER LEVEL”, add distilled water.
4-3. Do-it-yourself maintenance ■ Adding distilled water Low O.K. STEP 1 Remove the vent plug. STEP 2 Add distilled water. If the “UPPER LEVEL” line cannot be seen, check the fluid level by looking directly at the cell. STEP 3 Put the vent plug back on and close securely.
4-3. Do-it-yourself maintenance ■ Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, before recharging: ● If recharging with the battery installed on the vehicle, be sure to disconnect the ground cable. ● Make sure the power switch on the charger is off when connecting and disconnecting the charger cables to the battery.
4-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ● Do not cause sparks by touching the battery terminals with tools. ● Do not smoke or light a match near the battery. ● Avoid contact with eyes, skin and clothes. ● Never inhale or swallow electrolyte.
4-3. Do-it-yourself maintenance CAUTION ■ When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. ■ When adding distilled water Avoid overfilling. Water spilled during battery recharging may cause corrosion. Washer fluid If the washer fluid level is at “LOW”, add washer fluid.
4-3. Do-it-yourself maintenance WARNING ■ When adding washer fluid Do not add washer fluid when the engine is hot or running, as washer fluid contains alcohol and may catch fire if spilled on the engine etc. CAUTION ■ Washer fluid Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces. ■ Diluting washer fluid Dilute washer fluid with water as necessary.
4-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance schedules and treadwear. ■ Checking tires New tread Treadwear indicator Worn tread The location of treadwear indicators is shown by the “TWI” or “ ” marks, etc., molded on the sidewall of each tire. Check spare tire condition and pressure if not rotated. ■ Tire rotation Rotate the tires in the order shown.
4-3. Do-it-yourself maintenance Installing tire pressure warning valves and transmitters (vehicles with a tire pressure monitoring system) When replacing tires or wheels, tire pressure warning valves and transmitters must also be installed. When new tire pressure warning valves and transmitters are installed, new tire pressure warning valve and transmitter ID codes must be registered in the tire pressure warning computer and tire pressure monitoring system must be initialized.
4-3. Do-it-yourself maintenance Registering ID codes (vehicles with a tire pressure monitoring system) The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by your SUBARU dealer.
4-3. Do-it-yourself maintenance ■ Maximum load of tire Check that the maximum load of the replacement tire is greater than 1/2 of the Gross Axle Weight Ratings (GAWR) of either the front axle or the rear axle, whichever is greater. For the GAWR, see the Certification Label. For the maximum load of the tire, see the load limit at maximum cold tire inflation pressure mentioned on the sidewall of the tire. (→P.
4-3. Do-it-yourself maintenance ■ Initializing the tire pressure monitoring system (if equipped) Initialize the system with the tire inflation pressure adjusted to the specified level. ■ Routine tire inflation pressure checks (vehicles with a tire pressure monitoring system) The tire pressure monitoring system does not replace routine tire inflation pressure checks. Make sure to check tire inflation pressure as part of your routine of daily vehicle checks.
4-3. Do-it-yourself maintenance WARNING ■ Tire pressure monitoring system operation (if equipped) The tire pressure monitoring system may not provide warning immediately if a tire bursts or if sudden air leakage occurs. ■ When inspecting or replacing tires Observe the following precautions to prevent accidents. Failure to do so may cause damage to parts of the drive train, as well as dangerous handling characteristics, which may lead to an accident resulting in death or serious injury.
4-3. Do-it-yourself maintenance CAUTION ■ To avoid damage to the tire pressure warning valves and transmit- ters (vehicles with a tire pressure monitoring system) When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your SUBARU dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire. (→P.
4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is displayed on the tire and loading information label. (→P.
4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge STEP 1 Remove the tire valve cap. STEP 2 Press the tip of the tire pressure gauge onto the tire valve. STEP 3 Read the pressure using the graduations of the gauge. STEP 4 If the tire inflation pressure is not within the recommended levels, adjust the pressure. If you add too much air, press the center of the valve to lower.
4-3. Do-it-yourself maintenance ■ Effects of incorrect tire inflation pressure Driving with incorrect tire inflation pressure may result in the following: ● Reduced fuel efficiency ● Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refilling, have it checked by your SUBARU dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ● Check only when the tires are cold.
4-3. Do-it-yourself maintenance WARNING ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury.
4-3. Do-it-yourself maintenance Wheels If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause loss of handling control. ■ Wheel selection When replacing wheels, care should be taken to ensure that they are equivalent to those removed in load capacity, diameter, rim width, and inset*. Replacement wheels are available at your SUBARU dealer. *: Conventionally referred to as “offset”.
4-3. Do-it-yourself maintenance ■ When replacing wheels (vehicles with a tire pressure monitoring system) The wheels of your SUBARU are equipped with tire pressure warning valves and transmitters that allow the tire pressure monitoring system to provide advanced warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, the tire pressure warning valves and transmitters must be installed. (→P.
4-3. Do-it-yourself maintenance CAUTION ■ Replacing tire inflation pressure warning valves and transmitters (vehicles with a tire pressure monitoring system) ● Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your SUBARU dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your SUBARU dealer.
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Removal method STEP 1 Vehicles without a keyless access with push button start system Turn the engine switch off. Vehicles with a keyless access with push button start system Turn the push-button ignition switch off. STEP 2 Open the glove box. Slide off the damper. STEP 3 Push in each side of the glove box to disconnect the claws.
4-3. Do-it-yourself maintenance STEP 4 Pull out the glove box and disconnect the lower claws. STEP 5 Remove the filter cover. 4 Remove the air conditioning filter and replace it with a new one. The “↑UP” marks shown on the filter should be pointing up.
4-3. Do-it-yourself maintenance ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Warranty and Maintenance Booklet”.) ■ If air flow from the vents decreases dramatically The filter may be clogged. Check the filter and replace if necessary.
4-3. Do-it-yourself maintenance Transmitter/access key battery Replace the battery with a new one if it is depleted. ■ You will need the following items: ● Flathead screwdriver ● Lithium battery CR2016 (vehicles without a keyless access with push button start system), or CR1632 (vehicles with a keyless access with push button start system) ■ Replacing the battery (vehicles without a keyless access with push button start system) STEP 1 Remove the cover.
4-3. Do-it-yourself maintenance STEP 3 Open the case cover using a coin protected with tape and remove the depleted battery. Insert a new battery with the “+” terminal facing up. ■ Replacing the battery (vehicles with a keyless access with push button start system) STEP 1 Take out the mechanical key. STEP 2 Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag.
4-3. Do-it-yourself maintenance Remove the depleted battery. STEP 3 Insert a new battery with the “+” terminal facing up. ■ Use a CR2016 (vehicles without a keyless access with push button start system) or CR1632 (vehicles with a keyless access with push button start system) lithium battery ● Batteries can be purchased at your SUBARU dealer, local electrical appliance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manufacturer.
4-3. Do-it-yourself maintenance WARNING ■ Removed battery and other parts Keep away from children. These parts are small and if swallowed by a child, they can cause choking. Failure to do so could result in death or serious injury. CAUTION ■ For normal operation after replacing the battery Observe the following precautions to prevent accidents: ● Always work with dry hands. Moisture may cause the battery to rust. ● Do not touch or move any other component inside the remote control.
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP 1 Vehicles without a keyless access with push button start system Turn the engine switch off. Vehicles with a keyless access with push button start system Turn the push-button ignition switch off. STEP 2 Open the fuse box cover. Engine compartment Push the tabs in and lift the lid off.
4-3. Do-it-yourself maintenance STEP 3 After a system failure, see “Fuse layout and amperage ratings” (→P. 332) for details about which fuse to check. STEP 4 Remove the fuse with the pullout tool. STEP 5 Check if the fuse has blown. Type A Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type B Normal fuse Blown fuse Replace it with one of an appropriate amperage rating.
4-3. Do-it-yourself maintenance Type C Normal fuse Blown fuse Contact your SUBARU dealer. Type D Normal fuse Blown fuse Contact your SUBARU dealer.
4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment Fuse Ampere Circuit 1 MIR HTR 7.5 A Outside rear view mirror defoggers 2 RDI 25 A Electric cooling fan 3 (PUSH-AT) 7.5 A Engine control unit 4 ABS NO.
4-3. Do-it-yourself maintenance Fuse Ampere Circuit SPARE See note. Spare fuse 17 SPARE See note. Spare fuse 18 SPARE See note. Spare fuse 19 SPARE See note. Spare fuse 20 SPARE See note. Spare fuse 21 ST 7.5 A Starting system 22 ALT-S 7.5 A Charging system 23 (STR LOCK) 7.5 A Steering lock system 24 D/L 20 A Power door lock 25 ETCS 15 A Engine control unit 26 (AT+B) 7.5 A Transmission 27 (AM2 NO. 2) 7.
4-3. Do-it-yourself maintenance Fuse Ampere Circuit 37 HORN NO. 2 7.5 A Horn 38 HORN NO. 1 7.5 A Horn 39 H-LP LH LO 15 A Left-hand headlight (low beam) 40 H-LP RH LO 15 A Right-hand headlight (low beam) 41 H-LP LH HI 10 A Left-hand headlight (high beam) 42 H-LP RH HI 10 A Right-hand headlight (high beam) 43 INJ 30 A Multiport fuel injection system/ sequential multiport fuel injection system 44 H-LP WASHER 30 A 45 AM2 NO.
4-3. Do-it-yourself maintenance ■ Instrument panel Fuse Ampere ECU ACC 10 A 2 16 P/POINT No.2 PANEL TAIL DRL STOP OBD HEATER-S HEATER FR FOG LH FR FOG RH BK/UP LP ECU IG1 AM1 AMP AT UNIT 15 A 10 A 10 A 10 A 7.5 A 7.5 A 7.5 A 10 A 10 A 10 A 7.5 A 10 A 7.5 A 15 A 15 A 17 GAUGE 7.5 A 3 4 5 6 7 8 9 10 11 12 13 14 15 ECU IG2 SEAT HTR LH 20 SEAT HTR RH 21 RADIO 22 P/POINT No.1 18 19 10 A 10 A 10 A 7.
4-3. Do-it-yourself maintenance ■ After a fuse is replaced ● If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (→P. 337) ● If the replaced fuse blows again, have the vehicle inspected by your SUBARU dealer. ■ If there is an overload in the circuits The fuses are designed to blow, protecting the wiring harness from damage. WARNING ■ To prevent system breakdowns and vehicle fire Observe the following precautions.
4-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your SUBARU dealer. ■ Preparing a replacement light bulb Check the wattage of the light bulb being replaced. (→P.
4-3.
4-3. Do-it-yourself maintenance Replacing light bulbs ■ Front turn signal lights STEP 1 Turn the bulb base counterclockwise. STEP 2 3 Remove the light bulb. 4 Maintenance and care STEP 3 When installing, reverse the steps listed.
4-3. Do-it-yourself maintenance ■ Front side marker lights STEP 1 Turn the steering wheel in the opposite direction of the light to be replaced. Turn the steering wheel to a point that allows your hand to easily fit between the tire and fender liner. STEP 2 Remove the clips and partly remove the fender liner. To prevent damage to the vehicle, cover the tip of the screwdriver with a rag. STEP 3 Release the light's claw. Insert the screwdriver into the hole.
4-3. Do-it-yourself maintenance Remove the light bulb. STEP 5 STEP 6 When installing, reverse the steps listed. ■ Front fog lights (if equipped) STEP 1 Turn the steering wheel in the opposite direction of the light to be replaced. 4 Remove the clips and partly remove the fender liner. To prevent damage to the vehicle, cover the tip of the screwdriver with a rag.
4-3. Do-it-yourself maintenance STEP 3 Unplug the connector while depressing the lock release. STEP 4 Remove the light bulb. STEP 5 342 When installing, reverse the steps listed.
4-3. Do-it-yourself maintenance ■ Rear side marker lights STEP 1 Remove a clip and partly remove the cover. To prevent damage to the vehicle, cover the tip of the screwdriver with a rag. STEP 2 Turn the bulb base counterclockwise. 4 STEP 4 Remove the light bulb. Maintenance and care STEP 3 When installing, reverse the steps listed.
4-3. Do-it-yourself maintenance ■ Rear turn signal lights STEP 1 Remove a clip and partly remove the cover. To prevent damage to the vehicle, cover the tip of the screwdriver with a rag. STEP 2 Turn the bulb base counterclockwise. STEP 3 Remove the light bulb. STEP 4 344 When installing, reverse the steps listed.
4-3. Do-it-yourself maintenance ■ Back-up lights STEP 1 Turn the bulb base counterclockwise. STEP 2 3 Remove the light bulb. 4 When installing, reverse the steps listed.
4-3. Do-it-yourself maintenance ■ License plate lights STEP 1 Remove the trunk lid panel cover clips and partly remove the trunk lid panel cover. To prevent damage to the vehicle, cover the tip of the screwdriver with a rag. STEP 2 Turn the bulb base counterclockwise. STEP 3 Remove the light bulb. STEP 4 346 When installing, reverse the steps listed.
4-3. Do-it-yourself maintenance ■ Interior light STEP 1 Remove the lens. To prevent damage to the interior light, cover the tip of the screwdriver with a rag. STEP 2 Remove the light bulb. 4 When installing, reverse the steps listed.
4-3. Do-it-yourself maintenance ■ Vanity lights (if equipped) STEP 1 Open the cover and remove the lens. To prevent damage to the vanity light, cover the tip of the screwdriver with a rag. STEP 2 STEP 3 348 Remove the light bulb. When installing, reverse the steps listed.
4-3. Do-it-yourself maintenance ■ Replacing the following bulbs If any of the lights listed below has burnt out, have it replaced by your SUBARU dealer. ● Headlight high and low beams ● Parking lights ● Daytime running lights ● Stop/tail lights ● High mounted stoplight ■ Condensation build-up on the inside of the lens Contact your SUBARU dealer for more information in the following situations. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction.
4-3. Do-it-yourself maintenance ■ When replacing light bulbs SUBARU recommends that you use genuine SUBARU products designed for this vehicle. Because certain bulbs are connected to circuits designed to prevent overload, non-genuine parts or parts not designed for this vehicle may be unusable. ■ Removing and installing the luggage trim cover and trunk lid panel cover clip Removing Installing WARNING ■ Replacing light bulbs ● Turn off the lights.
4-3. Do-it-yourself maintenance WARNING ■ Discharge headlights ● Contact your SUBARU dealer before replacing the discharge headlights (including light bulbs). ● Do not touch the discharge headlight’s high voltage socket when the headlights are turned on. An extremely high voltage of 25000 V will be discharged and could result in serious injury or death by electric shock.
4-3.
When trouble arises 5-2. Steps to take in an emergency 5-1. Essential information Hazard warning flashers .......................... If your vehicle needs to be towed ........................ If you think something is wrong ......................... Fuel pump shut off system ........................... 5 354 355 362 363 If a warning light turns on or a warning buzzer sounds... ....................... If you have a flat tire......... If the engine will not start ................................
5-1. Essential information Hazard warning flashers The hazard warning flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again. ■ Hazard warning flashers If the hazard warning flashers are used for a long time while the engine is not operating, the battery may discharge.
5-1. Essential information If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your SUBARU dealer or a commercial towing service, using a flat bed truck. The vehicle must be secured properly with safety chains. Each safety chain should be equally tightened and care must be taken not to pull the chains so tightly that the suspension bottoms out.
5-1. Essential information ■ Before emergency towing STEP 1 Release the parking brake. STEP 2 Shift the select lever to N (vehicles with an automatic transmission) or shift lever to neutral (vehicles with a manual transmission). STEP 3 Vehicles without a keyless access with push button start system: Turn the engine switch to the “ACC” (engine off) or “ON” (engine running) position.
5-1. Essential information CAUTION ■ To prevent causing serious damage to the transmission in emergency towing (vehicles with an automatic transmission) Never tow a vehicle from the rear with four wheels on the ground. This may cause serious damage to the transmission.
5-1. Essential information Rear STEP 2 Insert the towing eyelet into the hole and tighten partially by hand. STEP 3 Tighten down the towing eyelet securely using a wheel nut wrench. ■ Location of the emergency towing eyelet →P.
5-1. Essential information WARNING ■ Installing towing eyelets to the vehicle Make sure that towing eyelet is installed securely. If not securely installed, towing eyelets may come loose during towing. This may lead to accidents that cause serious injury or even death. ■ After towing Always remove the towing eyelet. Failure to do so can cause the SRS airbags to not operate correctly in the event of a frontal collision.
5-1. Essential information CAUTION ■ Towing with a wheel lift-type truck is not recommended If a flat bed truck is not available, observe the following precautions to prevent damage to the drive train or body. From the front Never tow a vehicle from the front with the rear wheels on the ground.Use a towing dolly under the rear wheels. From the rear Ensure that the front lower body components have adequate clearance to prevent contact with the road surface under all conditions.
5-1. Essential information Using a flat bed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged.
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your SUBARU dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.
5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an airbag inflates upon collision, the fuel pump shut off system stops supplying fuel to the engine. Follow the procedure below to restart the engine after the system is activated. Vehicles without a keyless access with push button start system STEP 1 Turn the engine switch to the “ACC” or “LOCK” position. STEP 2 Restart the engine.
5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds... Calmly perform the following actions if any of the warning lights turn on or flash. If a light turns on or flashes, but then turns off, this does not necessarily indicate a malfunction in the system. Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake system.
5-2. Steps to take in an emergency Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your SUBARU dealer immediately. Warning light (U.S.A.) Warning light/Details Malfunction indicator lamp Indicates a malfunction in: • The electronic engine control system; • The electronic throttle control system; • The electronic automatic transmission control system.
5-2. Steps to take in an emergency Warning light (Comes on in yellow) Warning light/Details Cruise control indicator light Indicates a malfunction in the cruise control system. ■ If the malfunction indicator lamp comes on while driving First check the following: ● Is the fuel tank empty? If it is, fill the fuel tank immediately. ● Is the fuel tank cap loose? If it is, tighten it securely. The malfunction indicator lamp will go off after several driving trips.
5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning light (On the instrument cluster) (On the center panel) Warning light/Details Open door warning light Indicates that a door or the trunk lid is not fully closed. Low fuel level warning light Remaining fuel (Approximately 1.8 gal. [7.0 L, 1.5 Imp. gal.
5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Tire pressure warning light (if equipped) *1: When the light comes on: Low tire inflation pressure such as • Natural causes (→P. 369) • Flat tire (→P. 378) Adjust the tire inflation pressure to the specified level. The light will turn off after a few minutes. In case the light does not turn off even if the tire inflation pressure is adjusted, have the system checked by your SUBARU dealer.
5-2. Steps to take in an emergency Vehicles with a keyless access with push button start system The driver’s seatbelt buzzer sounds to alert the driver that his or her seatbelt is not fastened. Once the push-button ignition switch is turned to “ON” mode, the buzzer sounds for 6 seconds. If the vehicle reaches a speed of 12 mph (20 km/h), the buzzer sounds once. If the seatbelt is still unfastened after 30 seconds, the buzzer will sound intermittently for 10 seconds.
5-2. Steps to take in an emergency ■ When a tire is replaced with a spare tire (vehicles with a tire pres- sure monitoring system) The compact spare tire is not equipped with a tire pressure warning valve and transmitter. If a tire goes flat, the tire pressure warning light will not turn off even though the flat tire has been replaced with the spare tire. Replace the spare tire with the repaired tire and adjust the tire inflation pressure. The tire pressure warning light will go off after a few minutes.
5-2.
5-2. Steps to take in an emergency WARNING ■ Maintenance of the tires (vehicles with a tire pressure monitoring system) Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
5-2. Steps to take in an emergency WARNING TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.
5-2. Steps to take in an emergency Follow the correction procedures. (vehicles with a keyless access with push button start system) After taking the specified steps to correct the suspected problem, check that the warning light goes off.
5-2. Steps to take in an emergency Interior buzzer Once 3 times 3 times Warning light (Flashes in yellow) (Flashes in yellow) Warning light/Details Correction procedure Keyless access with push button start system indicator light Vehicles with an automatic transmission: The access key was carried outside the vehicle and the driver’s door was opened and closed while the shift position P was selected without turning off the push-button ignition switch.
5-2. Steps to take in an emergency Interior buzzer Once Once Intermittently (7 seconds) Once Once 376 Exterior buzzer Continuous (10 seconds) Warning light (Flashes in yellow) (Flashes in yellow for 15 seconds.) (Flashes in yellow) (Flashes in yellow for 15 seconds.) (Flashes quickly in green for 15 seconds.
5-2. Steps to take in an emergency Interior buzzer Once Exterior buzzer Warning light (Flashes in yellow for 15 seconds.) Warning light/Details Correction procedure Keyless access with push button start system indicator light The access key could not be detected in the vehicle even after the push-button ignition switch was pressed once. Vehicles with an automatic transmission: Touch the access key to the push-button ignition switch while depressing the brake pedal.
5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the select lever to P (vehicles with an automatic transmission) or shift lever to R (vehicles with a manual transmission). ● Stop the engine. ● Turn on the hazard warning flashers.
5-2. Steps to take in an emergency Taking out the spare tire STEP 1 Remove the luggage mat. STEP 2 Remove the cover and loosen the center fastener that secures the spare tire.
5-2. Steps to take in an emergency Replacing a flat tire STEP 1 Chock the tires. Flat tire Lefthand side Behind the rear righthand side tire Righthand side Behind the rear lefthand side tire Lefthand side In front of the front right-hand side tire Righthand side In front of the front left-hand side tire Front Rear STEP 2 Wheel chock positions Vehicles with steel wheels: Remove the wheel ornament.
5-2. Steps to take in an emergency STEP 3 Slightly loosen the wheel nuts (one turn). STEP 4 Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point. STEP 5 Raise the vehicle until the tire is slightly raised off the ground. 5 Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
5-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign matter from the wheel contact surface. STEP 1 If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle. STEP 2 Tapered portion Install the spare tire and loosely tighten each wheel nut by hand to approximately the same amount.
5-2. Steps to take in an emergency STEP 5 Stow the flat tire, tire jack and all tools. ■ The compact spare tire ● The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily only in an emergency. ● Make sure to check the tire pressure of the compact spare tire. (→P.
5-2. Steps to take in an emergency ■ After completing the tire change (vehicles with a tire pressure mon- itoring system) The tire pressure monitoring system must be reset. (→P. 309) ■ Storing the tire Always install the center fastener as shown in the illustration below.
5-2. Steps to take in an emergency WARNING ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains. ● Only use the tire jack that comes with this vehicle for replacing a flat tire. Do not use it on other vehicles, and do not use other tire jacks for replacing tires on this vehicle.
5-2. Steps to take in an emergency WARNING ■ Replacing a flat tire ● Do not touch the disc wheels or the area around the brakes immedi- ately after the vehicle has been driven. After the vehicle has been driven the disc wheels and the area around the brakes will be extremely hot. Touching these areas with hands, feet or other body parts while changing a tire, etc. may result in burns. ● Do not attach a heavily damaged wheel ornament, as it may fly off the wheel while the vehicle is moving.
5-2. Steps to take in an emergency WARNING ■ When using the compact spare tire ● Remember that your compact spare tire is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle. ● Do not use two compact spare tires simultaneously. ● Replace the compact spare tire with a standard tire as soon as possi- ble. ● Avoid sudden acceleration, abrupt steering, sudden braking and shift- ing operations that cause sudden engine braking.
5-2. Steps to take in an emergency CAUTION ■ Do not drive the vehicle with a flat tire. Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair. ■ Be careful when driving over bumps with the compact spare tire installed on the vehicle. The vehicle becomes lower when driving with the compact spare tire compared to when driving with standard tires. Be careful when driving over uneven road surfaces.
5-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting procedures are being followed (→P. 160, 169), consider each of the following points. ■ The engine will not start even when the starter motor operates normally. One of the following may be the cause of the problem. ● There may not be sufficient fuel in the vehicle’s tank. Refuel the vehicle. ● The engine may be flooded.
5-2. Steps to take in an emergency ■ The starter motor does not turn over, the interior lights and headlights do not turn on, or the horn does not sound. One of the following may be the cause of the problem. ● One or both of the battery terminals may be disconnected. ● The battery may be discharged. (→P. 398) ● There may be a malfunction in the steering lock system.
5-2. Steps to take in an emergency Vehicles with a manual transmission STEP 1 Set the parking brake. STEP 2 Put the shift lever in neutral. STEP 3 Turn the push-button ignition switch to “ACC” mode. STEP 4 Push and hold the push-button ignition switch for about 15 seconds while depressing the brake pedal and clutch pedal firmly. Even if the engine can be started using the above steps, the system may be malfunctioning. Have the vehicle checked by your SUBARU dealer.
5-2. Steps to take in an emergency If the select lever cannot be shifted from P (vehicles with an automatic transmission) If the select lever cannot be shifted with your foot on the brake, there may be a problem with the shift lock system (a system to prevent accidental operation of the select lever). Have the vehicle inspected by your SUBARU dealer immediately. The following steps may be used as an emergency measure to ensure that the select lever can be shifted. STEP 1 Set the parking brake.
5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your SUBARU dealer. For vehicles without a keyless access with push button start system, bring a master key and the key number stamped on the key number plate. For vehicles with a keyless access with push button start system, bring the other key and the key number stamped on the key number plate.
5-2. Steps to take in an emergency If the access key does not operate properly (vehicles with a keyless access with push button start system) If communication between the access key and vehicle is interrupted (→P. 30) or the access key cannot be used because the battery is depleted, the keyless access with push button start system and remote keyless entry system cannot be used. In such cases, the doors and trunk lid can be opened or the engine can be started by following the procedure below.
5-2. Steps to take in an emergency Starting the engine Vehicles with an automatic transmission STEP 1 Ensure that the select lever is in P and firmly depress the brake pedal. STEP 2 Touch the SUBARU emblem side of the access key to the push-button ignition switch. When the access key is detected, a buzzer sounds and the pushbutton ignition switch will turn to “ON” mode.
5-2. Steps to take in an emergency Vehicles with a manual transmission STEP 1 Ensure that the shift lever is in neutral and depress the clutch pedal. STEP 2 Touch the SUBARU emblem side of the access key to the push-button ignition switch. When the access key is detected, a buzzer sounds and the pushbutton ignition switch will turn to “ON” mode. When the keyless access with push button start system is deactivated in customization setting, the push-button ignition switch will turn to “ACC” mode.
5-2. Steps to take in an emergency ■ Stopping the engine Vehicles with an automatic transmission: Shift the select lever to P and press the push-button ignition switch as you normally do when stopping the engine. Vehicles with a manual transmission: Shift the shift lever to neutral and press the push-button ignition switch as you normally do when stopping the engine.
5-2. Steps to take in an emergency If the battery is discharged The following procedures may be used to start the engine if the vehicle's battery is discharged. You can call your SUBARU dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle following the steps below.
5-2. Steps to take in an emergency STEP 4 Vehicles without a keyless access with push button start system: Maintain the engine speed of the second vehicle and turn the engine switch to the “ON” position, then start the vehicle's engine. Vehicles with a keyless access with push button start system: Maintain the engine speed of the second vehicle and turn the push-button ignition switch to “ON” mode, then start the vehicle's engine.
5-2. Steps to take in an emergency ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting. ■ Avoiding a discharged battery ● Turn off the headlights and the air conditioning system while the engine is off. ● Turn off any unnecessary electrical components when the vehicle is running at a low speed for an extended period, such as in heavy traffic, etc.
5-2. Steps to take in an emergency WARNING ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flammable gas that may be emitted from the battery. ● Make sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any part other than the intended terminal. ● Do not allow the jumper cables to come into contact with the “+” and “-” terminals.
5-2. Steps to take in an emergency CAUTION ■ When handling jumper cables Be careful that the jumper cables do not become tangled in the cooling fans or any of the belts when connecting or disconnecting them. ■ When closing the doors While pushing the door glass towards the inside of the vehicle, slowly close the door.
5-2. Steps to take in an emergency If your vehicle overheats If your engine overheats: STEP 1 Stop the vehicle in a safe place and turn off the air conditioning system. STEP 2 Check to see if steam is coming out from under the engine hood. If you see steam: Stop the engine. Carefully lift the engine hood after the steam subsides and then restart the engine. If you do not see steam: Leave the engine running and carefully lift the engine hood. STEP 3 Check to see if the cooling fan is operating.
5-2. Steps to take in an emergency STEP 5 Add engine coolant if necessary. Water can be used in an emergency if engine coolant is unavailable. (→P. 416) Have the vehicle checked at the nearest SUBARU dealer as soon as possible. ■ Overheating If you observe the following, your vehicle may be overheating. ● The engine coolant temperature gauge enters the red zone or a loss of power is experienced. ● Steam is coming from under the engine hood.
5-2. Steps to take in an emergency CAUTION ■ When adding engine coolant Wait until the engine has cooled down before adding engine coolant. When adding coolant, do so slowly. Adding cool coolant to a hot engine too quickly can cause damage to the engine.
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow: STEP 1 Stop the engine. Set the parking brake and shift the select lever to P (vehicles with an automatic transmission) or shift lever to neutral (vehicles with a manual transmission). STEP 2 Remove the mud, snow or sand from around the rear wheels.
5-2. Steps to take in an emergency WARNING ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free. Use extreme caution. ■ When shifting the select lever For vehicles with an automatic transmission, be careful not to shift the select lever with the accelerator pedal depressed.
5-2.
Vehicle specifications 6 6-1. Specifications Maintenance data (fuel, oil level, etc.)......... 410 Fuel information ............... 422 Tire information ................ 426 6-2. Customization Customizable features .....
6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weight Overall length 166.7 in. (4235 mm) Overall width 69.9 in. (1775 mm) Overall height U.S.A. 56.3 in. (1430 mm) Canada 56.1 in. (1425 mm) * Wheelbase Tread 101.2 in. (2570 mm) Front 59.8 in. (1520 mm) Rear 60.6 in. (1540 mm) Vehicle capacity weight (Occupants + luggage) *: Unladen vehicle 410 Details are described on the tire and loading information label. (→P.
6-1. Specifications Vehicle identification ■ Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your SUBARU. It is used in registering the ownership of your vehicle. This number is stamped under the right-hand front seat. This number is located on the top left of the body panel. This number is also on the Certification Label.
6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown.
6-1. Specifications Engine Model FA20 Type Horizontally opposed, liquid cooled 4 cylinder, 4stroke gasoline Bore and stroke 3.4 × 3.4 in. (86 × 86 mm) Displacement 121.9 cu.in. (1998 cm3) Drive belt tension Automatic adjustment Fuel Fuel type Unleaded gasoline only Octane rating 93 AKI (98 RON) or higher* Fuel tank capacity (Reference) 13.2 gal. (50 L, 11.0 Imp. gal.
6-1. Specifications Lubrication system Oil capacity (Drain and refill reference*) • Without filter • With filter *: 5.5 qt. (5.2 L, 4.6 Imp. qt.) 5.7 qt. (5.4 L, 4.8 Imp. qt.) The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick. ■ Engine oil selection Always use SUBARU approved engine oil. For details, we recommend that you contact your SUBARU dealer.
6-1. Specifications Oil viscosity (0W-20 is explained here as an example): • The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. • The 20 in 0W-20 indicates the viscosity characteristic of the oil when the oil is at high temperature.
6-1. Specifications Cooling system Capacity Vehicles with an automatic transmission 7.9 qt. (7.5 L, 6.6 Imp. qt.) Vehicles with a manual transmission 7.6 qt. (7.2 L, 6.3 Imp. qt.) Coolant type Use either of the following. • SUBARU Super Coolant • Similar high-quality ethylene glycol-based nonsilicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone. Ignition system Spark plug Make Gap DENSO ZXE27HBR8 0.031 in. (0.
6-1. Specifications Electrical system Battery 1.250 1.290 Fully charged 1.160 1.200 Half charged 1.060 1.100 Discharged Specific gravity reading at 68°F (20°C): Charging rates Quick charge Slow charge 15 A max. 5 A max. Differential Oil capacity (Reference) 1.20 qt. (1.15 L, 1.01 Imp. qt.
6-1. Specifications Automatic transmission Fluid capacity* 7.9 qt. (7.5 L, 6.6 Imp. qt.) Fluid type ATF WS *: The fluid capacity is provided as a reference. If replacement is necessary, contact your SUBARU dealer. Manual transmission Gear oil capacity (Reference) 2.3 qt. (2.2 L, 1.9 Imp. qt.
6-1. Specifications Brakes 2.16 in. (55 mm) Min. Brake pedal Pedal clearance*1 Pedal clearance Carpet Pedal free play 0.008 0.079 in. (0.2 2.0 mm) Brake pad wear limit 0.06 in. (1.5 mm) Parking brake lining wear limit 0.06 in. (1.5 mm) Parking brake lever travel* 7 8 clicks Fluid type FMVSS No.116 fresh DOT 3 or DOT 4 brake fluid 2 *1: Minimum pedal clearance when depressed with a force of 110 lbf (490 N, 50 kgf) while the engine is running.
6-1. Specifications Steering Free play Less than 1.2 in. (30 mm) Tires and wheels Type A Tire size P205/55R16 89V, T135/80D16 101M Tire inflation pressure (Recommended cold tire inflation pressure) Front: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Spare: 60 psi (420 kPa, 4.2 kgf/cm2 or bar) Wheel size 16 × 6 1/2J, 16 × 6 1/2JJ, 16 × 4T (compact spare) Wheel nut torque 89 ft•lbf (120 N•m, 12.
6-1. Specifications Light bulbs Light Bulbs Exterior Bulb No. W Type Headlights Low/high beam D4S 35 A Front side marker lights #194 3.
6-1. Specifications Fuel information The engine is designed to operate at maximum performance using unleaded gasoline with an octane rating of 93 AKI (98 RON) or higher. If 93 AKI (98 RON) fuel is not readily available in your area, unleaded gasoline with an octane rating of 91 AKI (95 RON) may be used with no detriment to engine durability or driveability.
6-1. Specifications ■ Gasoline for California-certified LEV If your vehicle was certified to California’s low emission vehicle (LEV) standards as indicated on the underhood tune-up label, it is designed to optimize engine and emission performance with gasoline that meets the clean burning low-sulfur California gasoline specifications. If you live in any other state than California, your vehicle will operate on gasoline meeting Federal specifications.
6-1. Specifications ■ SUBARU does not recommend blended gasoline DO NOT use gasoline containing more than 10% ethanol. (15% ethanol) (50% ethanol) (85% ethanol) ● Use only gasoline containing a maximum of 10% ethanol. DO NOT use any flex-fuel or gasoline that could contain more than 10% ethanol, including from any pump labeled E15, E30, E50, E85 (which are only some examples of fuel containing more than 10% ethanol).
6-1. Specifications CAUTION ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction. ● Do not use gasohol other than that stated here. Other gasohol may cause fuel system damage or vehicle performance problems.
6-1. Specifications Tire information Typical tire symbols Standard tire Compact spare tire Tire size (→P. 429) DOT and Tire Identification Number (TIN) (→P. 428) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators 426 (→P.
6-1. Specifications Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL” is a bias-ply tire. TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly filled in the tire. A tube type tire has a tube inside the tire and the tube maintains the air pressure.
6-1. Specifications Typical DOT and tire identification number (TIN) DOT symbol* Tire Identification (TIN) Number Tire manufacturer's identification mark Tire size code Manufacturer's optional type code (3 or 4 letters) tire Manufacturing week Manufacturing year *: The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size.
6-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer Uniform Tire Quality Grading This information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of SUBARU vehicles with information on uniform tire quality grading.
6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use.
6-1. Specifications Warning: The temperature grades of a tire assume that it is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. Glossary of tire terminology Tire related term Meaning Cold tire inflation pressure Tire pressure when the vehicle has been parked for three hours or more, or has not been driven more than 1 mile or 1.
6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants specified in the second column of Table 1* that follows Occupant distribution Distribution of occupants in a vehicle as specified in the third column of Table 1* below Production options weight The combined weight of installed regular production options weighing over 5 lb. (2.
6-1.
6-1.
6-1. Specifications Tire related term Meaning Overall width The linear distance between the exteriors of the sidewalls of an inflated tire, including elevations due to labeling, decorations, or protective bands or ribs Passenger car tire A tire intended for use on passenger cars, multipurpose passenger vehicles, and trucks, that have a gross vehicle weight rating (GVWR) of 10,000 lb. or less.
6-1.
6-1.
6-2. Customization Customizable features Your vehicle includes a variety of electronic features that can be personalized to your preferences. Programming these preferences requires specialized equipment and may be performed by your SUBARU dealer. Some function settings are changed simultaneously with other functions being customized. Contact your SUBARU dealer. Item Keyless access with push button start system (→P.
6-2. Customization Item Remote keyless entry system (→P.
6-2. Customization Item Automatic light control system (→P. 200) Rear window defogger (→P. 251) Illumination (→P.
6-2.
For owners 7 Reporting safety defects for U.S. owners .............. 444 Seatbelt instructions for Canadian owners (in French) ..................... 445 SRS airbag instructions for Canadian owners (in French) .....................
Reporting safety defects for U.S. owners If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Subaru of America, Inc. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Seatbelt instructions for Canadian owners (in French) The following is a French explanation of seatbelt instructions extracted from the seatbelt section in this manual. See the seatbelt section for more detailed seatbelt instructions in English. Utilisation correcte des ceintures de sécurité ● Déroulez la sangle diagonale de telle sorte qu'elle passe bien sur l'épaule, sans pour autant être en contact avec le cou ou glisser de l'épaule. ● Placez la sangle abdominale le plus bas possible sur les hanches.
Guide de la ceinture de sécurité avant Pour faciliter le déroulage de la ceinture de sécurité, passez-la dans le guide. Lorsque vous accédez aux sièges arrière ou en descendez, sortez la ceinture de sécurité de son guide.
Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède. Vérifiez régulièrement que les ceintures ne sont pas effilochées, entaillées ou exagérément usées. DANGER ■ État et usure des ceintures de sécurité ● Évitez d'abîmer les ceintures de sécurité en coinçant dans la porte une sangle, le pêne ou la boucle. ● Inspectez les ceintures de sécurité périodiquement.
SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instructions in English.
Modèles équipés d'airbags SRS et de retenues d'épaules pour le conducteur, le passager avant, et les passagers arrières côté vitres Votre véhicule est équipé d'un système de retenue supplémentaire en plus de la ceinture de sécurité à chacun des sièges avants et à chacun des sièges arrières côté vitres. Le système de retenue supplémentaire (SRS) consiste en six airbags. Les configurations sont les suivantes.
DANGER ■ Airbag SRS ● Pour obtenir la protection maximum dans le cas d'un accident, le conducteur et tous les passagers du véhicules doivent toujours porter leurs ceintures de sécurité lorsque le véhicule est en mouvement. L'airbag SRS est conçu uniquement comme un complément à la protection principale fournie par la ceinture de sécurité. Il n'annule pas le besoin d'attacher les ceintures de sécurité.
DANGER ■ Airbag SRS ● Les airbags SRS se déploient avec une force et une vitesse considérables. Les occupants qui ne sont pas dans des positions correctes lors du déploiement des airbags pourraient souffrir de blessures graves. Puisque l'airbag SRS a besoin de suffisamment de place pour se déployer, le conducteur doit toujours se tenir droit et le plus en arrière possible dans son siège, le plus éloigné possible du volant tout en maintenant le contrôle complet du véhicule.
DANGER ■ Airbag SRS ● Placez les enfants de 12 ans et moins dans le siège arrière, correctement attachés à tout moment. L’airbag SRS se déploie avec une vitesse et une force considérable, et peut blesser et même tuer les enfants, particulièrement s'ils ont 12 ans ou moins et qu’ils ne sont pas retenus ou mal retenus. Parce que les enfants sont plus légers et plus fragiles que les adultes, le risque qu’ils soient blessés par le déploiement est plus élevé.
DANGER ■ Airbag SRS ● N’INSTALLEZ JAMAIS DE SIÈGE DE SÉCURITÉ ENFANT VERS L’ARRIÈRE DANS LE SIÈGE AVANT. LE FAIRE POURRAIT CAUSER DES BLESSURES GRAVES VOIRE MORTELLES À L’ENFANT EN PLAÇANT LA TÊTE DE L’ENFANT TROP PRÈS DE L’AIRBAG SRS. ● N’autorisez jamais un enfant à se tenir debout ou à s’agenouiller dans le siège passager avant, et ne tenez jamais un enfant sur vos genoux ou dans vos bras. L’airbag SRS se déploie avec une force considérable et peut blesser ou même tuer l’enfant.
Composition du système d’airbags SRS Capteur frontal secondaire (côté droit) Capteur d'impact de porte (côté droit) Témoin d'alerte du système d'airbags SRS Module des airbags rideaux (côté droit) Module de l'airbag frontal (côté conducteur)(à deux étapes) Circuits airbags Témoin MARCHE et ARRÊT de l’airbag frontal du siège passager avant (au centre du tableau de bord) Module de l'airbag frontal (côté passager avant)(à deux étapes) Module de détection de l'occupant passager avant 454 électriques d
Capteur satellite de sécurité (sous le siège arrière du milieu) Capteur de l'airbag latéral (côté gauche du montant central) Capteur du système de détection de passager du passager avant Module de l'airbags latéral (côté conducteur) Bouton de boucle de ceinture de sécurité (côté passager avant) Prétensionneur de ceinture de sécurité (côté conducteur) Capteur des airbags rideaux (côté gauche de la roue arrière) Capteur d'impact de porte (côté gauche) Module de contrôle d'airbag (y-compris les capteurs d
Votre véhicule est équipé d'airbags avancés (ADVANCED AIRBAGS) conçus selon les normes de sécurité américaines applicables aux véhicules à moteur (FMVSS208). Le système d’airbag contrôle la puissance de déploiement des airbags pour le conducteur et le passager avant. Le système d'airbag passager avant comprend le module de contrôle de détection des occupants du siège passager avant, etc. Les principaux éléments du système d'airbags SRS sont illustrés cidessus.
Système avancé d'airbags frontaux SUBARU Votre véhicule est équipé d'un système avancé d'airbags frontaux SUBARU, conforme aux nouvelles conditions des airbags frontaux avancés dans la norme Federal Motor Vehicle Safety amendée (FMVSS) No. 208.
DANGER ■ En cas de déploiement (gonflage) des airbags SRS Ne touchez pas les composants du système d'airbag SRS près du volant et du tableau de bord à mains nues immédiatement après le déploiement. Le faire peut causer des brûlures car les composants peuvent être très chauds à la suite du déploiement. ■ Précautions avec les sièges de sécurité enfant N’INSTALLEZ JAMAIS UN SIÈGE ENFANT VERS L’ARRIÈRE DANS LE SIÈGE PASSAGER AVANT MÊME SI L’AIRBAG FRONTAL SRS DU PASSAGER AVANT EST DÉSACTIVÉ.
Airbag latéral SRS et airbag rideau SRS Les airbags latéraux sont stockés côté portière de chaque dossier de siège, et porte une étiquette “SRS AIRBAG”. Dans une collision moyenne à sévère, l'airbag latéral SRS sur le côté de l'impact du véhicule se déploie entre l'occupant et la partie basse de la portière, et complémente la ceinture de sécurité en réduisant l'impact sur la poitrine et la taille de l'occupant. L'airbag latéral SRS opère uniquement pour les occupants des sièges avants.
DANGER ■ En cas de déploiement (gonflage) des airbags SRS Ne touchez pas les composants du système d'airbag latéral SRS autour du dossier du siège avant à mains nues immédiatement après le déploiement. Le faire peut causer des brûlures car les composants peuvent être très chauds à la suite du déploiement. Après le déploiement, ne touchez aucune partie du système d'airbag rideau SRS (depuis le montant frontal à la partie du rail latéral de toit au dessus du siège arrière).
DANGER ■ Précautions avec les airbags SRS ● L'airbag SRS passager avant se déploie également avec une violence considérable, qui peut être très dangereuse, voire mortelle, si le passager avant se trouve très près de l'airbag. Éloignez le siège passager avant au maximum de l'airbag et réglez le dossier de siège de façon à être assis bien droit dans le siège.
DANGER ■ Précautions avec les airbags SRS ●Ne vous asseyez pas sur le bord du siège et ne vous appuyez pas contre le tableau de bord. ●Ne laissez pas un enfant rester debout devant l'airbag SRS passager avant ou bien s'asseoir sur les genoux du passager avant. ●Ne laissez pas les occupants des sièges avant voyager avec un objet sur les genoux. ●Ne vous appuyez pas contre la porte, contre le rail latéral de toit ou contre les montants avant, latéraux et arrière.
DANGER ■ Précautions avec les airbags SRS ● Interdisez à quiconque de s'agenouiller sur le siège passager en appui contre la porte ou de sortir la tête ou les mains à l'extérieur du véhicule. ● Ne fixez ni ne posez aucun objet sur le tableau de bord ou la garniture centrale du moyeu de volant. Au déploiement des airbags SRS conducteur et passager avant, tout objet risque de se transformer en projectile.
DANGER ■ Précautions avec les airbags SRS ● N'utilisez aucun accessoire de siège venant recouvrir les zones de déploiement des airbags SRS latéraux, car il risquerait d'en gêner le déploiement. De tels accessoires peuvent empêcher les airbags latéraux de fonctionner correctement, désactiver le dispositif ou entraîner le déploiement accidentel des airbags latéraux, entraînant la mort ou des blessures graves.
DANGER ■ Modification et mise au rebut des éléments du système d'airbags SRS Consultez impérativement votre concessionnaire SUBARU si vous avez besoin d'intervenir sur votre véhicule ou de procéder à l'une des modifications suivantes. Les airbags SRS risquent de ne pas fonctionner correctement ou de se déployer (gonfler) accidentellement, provoquant ainsi des blessures graves, voire mortelles. ● Installation, dépose, démontage et réparations des airbags SRS.
Moniteurs du système d’airbags SRS Un système de diagnostic contrôle continuellement la fonctionnalité du système d'airbag SRS (y-compris les prétensionneurs des ceintures de sécurité avants) lors de la conduite du véhicule. Le témoin lumineux du système d'airbags SRS montrera l'opération normale en s'allumant pendant environ 6 secondes quand le contacteur de démarrage est mis en position “ON”.
Les composants suivants sont contrôlés par l'indicateur: ● Capteur frontal secondaire (côté droit) ● Capteur frontal secondaire (côté gauche) ● Module de contrôle d'airbag (y-compris les capteurs d'impacts) ● Module de l'airbag frontal (côté conducteur) ● Module de l'airbag frontal (côté passager avant) ● Capteur de l'airbag latéral (côté droit du montant central) ● Capteur de l'airbag latéral (côté gauche du montant central) ● Capteur d'impact de porte (côté droit) ● Capteur d'impact de porte (côté gauche)
DANGER ■ Témoin d'alerte SRS Si le témoin lumineux montre une des conditions suivants, il peut y avoir un dysfonctionnement avec les prétensionneurs des ceintures de sécurité et/ou le système d'airbags SRS. Amenez immédiatement votre véhicule au concessionnaire SUBARU le plus proche pour une vérification du système.
Index Abbreviation list ..................... 470 Alphabetical index.................. 471 What to do if... ........................
Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING ABS Anti-lock Brake System ACC Accessory ALR Automatic Locking Retractor CRS Child Restraint System DISP Display ECU Electronic Control Unit EDR Event Data Recorder ELR Emergency Locking Retractor GAWR Gross Axle Weight Ratings GVWR Gross Vehicle Weight Rating I/M Emission inspection and maintenance LATCH Lower Anchors and Tethers for Children LED Light Emitting Diode LSD Limited Slip Differential M+S Mud and S
Alphabetical index Alphabetical index A A/C .................................... 234, 241 ABS........................................... 215 Access key If the access key does not operate properly........... 394 Air conditioning filter.............. 322 Air conditioning system Air conditioning filter ............. 322 Automatic air conditioning system................................ 241 Manual air conditioning system................................ 234 Airbags Airbag operating conditions...................
Alphabetical index B Back-up lights Replacing light bulbs.............337 Wattage.................................421 Battery Checking ...............................302 If the vehicle has a discharged battery ..............398 Preparing and checking before winter .......................226 Bottle holders...........................257 Brake Fluid ......................................300 Parking brake ........................183 Brake assist..............................215 Break-in tips ..................
Alphabetical index D Daytime running light system ................................... 203 Defogger Rear window......................... 250 Side mirror............................ 250 Dimension................................ 410 Dinghy towing ......................... 231 Display Multi-information display....... 195 Trip information .................... 196 Do-it-yourself maintenance.... 289 Door courtesy lights Door courtesy lights.............. 253 Wattage ................................
Alphabetical index Engine Compartment ........................294 Engine hood ..........................292 Engine switch ................160, 169 How to start the engine .........................160, 169 Identification number.............411 If the engine will not start ......389 Ignition switch................160, 169 Overheating...........................403 Engine coolant Capacity ................................416 Checking ...............................298 Engine coolant temperature gauge ..........
Alphabetical index Fuel Capacity ............................... 413 Fuel gauge ........................... 185 Fuel pump shut off system ... 363 Gas station information ........ 484 Information ........................... 422 Refueling ................................ 73 Fuel door.................................... 73 Fuel filler lid ............................... 73 Fuel pump shut off system .... 363 Fuses........................................ 329 G Gauges .....................................
Alphabetical index K Keyless entry..............................37 M Maintenance Keys Access key ..............................20 Engine switch ................160, 169 If you lose your keys .............393 If your access key battery is discharged...........394 Key number.............................20 Keyless entry...........................37 Keys ........................................20 Mechanical key .......................21 Transmitter ..............................
Alphabetical index P Parking brake .......................... 183 Parking lights Switch................................... 200 Power outlets........................... 264 Power windows ......................... 70 R Radiator.................................... 300 Rear seats .................................. 54 Rear side marker lights Replacing light bulbs ............ 337 Switch................................... 200 Wattage ................................
Alphabetical index Seats Adjustment ..............................51 Adjustment precautions...........52 Child seats/child restraint system installation ..............136 Cleaning ................................276 Head restraint..........................56 Properly sitting in the seat.......85 Seat heaters..........................266 Service reminder indicators ..............................190 Shift lever Automatic transmission .........172 If the select lever cannot be shifted from P.................
Alphabetical index T Tachometer Tachometer .......................... 185 Tail lights Switch................................... 200 Theft deterrent system Alarm ...................................... 81 Engine immobilizer system..... 77 Theft prevention labels............. 80 Tire inflation pressure ............ 420 Tire information Glossary ............................... 432 Size ...................................... 429 Tire identification number ..... 428 Uniform tire quality grading ................
Alphabetical index W Warning buzzers Electric power steering..........365 Seatbelt reminder..................367 Warning lights Automatic transmission fluid temperature warning light........................367 Anti-lock brake system ................................365 Brake assist system ..............365 Brake system ........................364 Charging system ...................364 Cruise control indicator light.......................365 Electric power steering system warning light ...........
What to do if... What to do if... A tire punctures P. 378 If you have a flat tire P. 389 If the engine will not start The engine does not start P. 77 Engine immobilizer system P. 398 If the battery is discharged The select lever cannot be moved out P. 392 If the select lever cannot be shifted from P The engine coolant temperature gauge enters the red P. 403 If your vehicle overheats Steam can be seen coming from under the engine hood The key is lost P.
What to do if...
What to do if... ■Warning lights Brake system warning light Keyless access with push button start system indicator light P. 365, 374 or Slip indicator P. 364 P. 365 Charging system warnP. 364 ing light Cruise control indicator light* P. 365 Low engine oil pressure P. 364 warning light Open door warning light Malfunction indicator lamp Low fuel level warning light P. 367 P. 367 or P. 365 Driver’s seatbelt reminder light P. 367 SRS airbag system P.
GAS STATION INFORMATION Fuel filler lid P. 73 Tire inflation pressure P. 420 Fuel tank capacity (Reference) Fuel type Cold tire inflation pressure Engine oil capacity (Drain and refill reference) Engine oil type 484 Trunk lid opener P. 45 Fuel filler lid opener P. 73 Auxiliary catch lever P. 292 Engine hood lock release lever P. 292 13.2 gal. (50 L, 11.0 Imp. gal.) Unleaded gasoline only Front: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear: 35 psi (240 kPa, 2.