User's Manual

ManualsBrandsStyling city industries ManualsElectronicsWireless Doorbell Receiver w/ Analog Clock

Wall Clock Door Chime Kit Model No.: CD-101

No wiring is required for this Wire Free Door Chime Kit. When the Push Button is pressed, it sends a

wireless signal to the door chime that activates the chime.

Since the operating range is up to 30metre (100 ft approx. – in open field), you can mount or take the

door chime virtually anywhere in the home, workshop, office or garden. However, the transmission

range of the wire free signal will be reduced if the signal is transmitted through a number of walls or

ceilings. Metal and UPVC doorframes will also reduce the operating range.

Battery Installation

Push button unit

1. Push button unit is operated by 1 x 3volt Lithium batteries (CR2032 - included)

2. The Lithium batteries (CR2032) have been installed, it is ready to use.

Replace the batteries.

- Remove the name plate holder, then remove the back of case by pushing in the tab on the bottom

with a small, flat screwdriver.

- Remove the locking screw from the battery fastener of the battery compartment.

- Insert 1 x 3volt Lithium batteries (CR2032 - included) in the battery compartment, ensuring the

battery polarity match the internal markings, then tighten the screw on the battery fastener to hold

the batteries firm in it’s compartment.

- Snap the front cover of push button back on, then it is ready to use.

Wall Clock with built-in Door Chime unit

This unit consist of two parts, a) Wall Clock & b) Door Chime.

Clock:

a) The battery compartment is located at the centre of the unit.

b) Insert 1 x 1.5volt battery (“AA”, UM3 & LR6 – not included) into the battery compartment,

ensuring the battery polarity match the internal markets, then it is ready to use.

Door Chime:

a) Remove the battery cover from the back/bottom of the unit.

b) Insert 2 x 1.5volt alkaline batteries (“AA”, UM3 & LR6 – not include) into the battery

compartment, ensuring the battery polarity match the internal markings.

c) It will beep twice to indicate that it is ready to use and learn the operation code (Please see Digital

Code Set Up).

d) Close the battery door, then the chime unit is ready to use.

Installation Guide

a) Push Button Unit: Using the two holes of the back of push button as a template, mark the fixing

position for the unit. Drill hole and fit wall plug and secure the Push Button Unit with screws

(self-tapping 3 x 16mm screw) in position, or by the double-sided self-adhesive pad (included),

Summary of content (4 pages)

PAGE 1
Wall Clock Door Chime Kit Model No.: CD-101 No wiring is required for this Wire Free Door Chime Kit. When the Push Button is pressed, it sends a wireless signal to the door chime that activates the chime. Since the operating range is up to 30metre (100 ft approx. – in open field), you can mount or take the door chime virtually anywhere in the home, workshop, office or garden.
PAGE 2
onto your front door or the position nearby. Important: Mounting the Push Button unit on the UPVC doorframes or metal surface will reduce the broadcasting range seriously. b) Wall Clock with built-in Door Chime: Drill hole and fit wall plug (if fixing to masonry) and screw (self-tapping 3 x 16mm screw) to fixing position. Leave a gap of 3mm between the screw head and the wall. Locate the keyhole slot on the back of the unit over the screw.
PAGE 3
Door Chime Operation Press the button on the Push Button unit once, it sends a wire free signal to the Wall Clock Door Chime, the Chime unit will sound. The sound will stop as soon as the melody ends. For repeat sound, press the button again. Hold the button in will NOT repeat the sound. Sound Volume Adjustment Tone sound volume control can be adjusted to high or low. The high-low switch is located at the back of the Wall Clock-Door Chime unit.
PAGE 4
Chime does not 1. Flat Push Button battery 1. Change the battery sound plus no 2. Wrong polarity of battery 2. Re-insert battery as internal lights on Push in Push Button marking in right polarity Button LED Chime sounds 1. A similar Wire Free Door without Push Chime product is operating Button being nearby on the same frequency pressed digital code 1.