007528548/319988341/611768150526/23MM90688-PC78 1007529152/319988342/611768150502/23MM90688-TPB01 1007529086/319988337/611768150519/23MM90688-TPG22 1007529185/319988497/611768150717/23MM90688-TPT01 USE AND CARE GUIDE CANTERIDGE 60-IN. INFRARED MEDIA ELECTRIC FIREPLACE Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.
Table of Contents Maximum Load Warning............................................ 2 Safety Information...................................................... 3 Warranty...................................................................... 5 Pre-Assembly.............................................................. 6 Hardware Included ................................................... 6 Product Specifications........................................................ 6 Tools Required.........................
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. 2. 3. 4. 5. 6. 7. 8.
Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. Do not sit on any part of the mantel. It is recommended to work on a soft surface like a rug or to lay out a blanket to protect the furniture from getting scratched during the assembly process.
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new electric fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
Pre-Assembly HARDWARE INCLUDED AA BB MM Part CC NN DD OO Description EE FF PP QQ Part Number GG Quantity AA Screw- Ø3 x 12 mm PH-SCRBLK007 2 BB Screw- Ø3.5 x 12 mm PH-SCRBLK013 7 Part Quantity Floor glide (Pre-attached) Hinge (Pre-attached) Threaded Insert (Pre-attached) PH-GLDBRW001 PH-HNGBRZ016 PH-THRZNC001 5 2 Set 4 Wire clip (Pre-attached) PH-23MMWIRECLIP 3 PH-SCRBLK010 4 2 EE Bolts- Ø6.
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit.
Assembly 1 Attaching the center fireplace surround 2 Assembling the fireplace Locate the Front Panel with Control Button (EA). Locate the Top Surround Rail (D) as well as the Left and Right Partitions (B and C). Align the Top Surround Rail (D) between the Left and Right Partitions (B and C). Push together, inserting the preinstalled dowels on the Top Surround Rail (D) into the holes on the Left and Right Partitions (B and C) as shown.
Assembly (continued) 4 Attaching the base Locate the Base (A) and align the Base (A) with of the center assembly. Insert Screws (GG) through the Base (A) and into the pre-drilled holes on the edges of the center assembly as shown. Securely tighten all screws using a Phillips screwdriver. A GG 5 Attaching the side panels 6 Attaching the back panels Locate the Left and Right Side Panels (E and F). Locate the Back Panels (H). Align the Left and Right Side Panels (E and F) with the Base (A).
Assembly (continued) 7 Attaching the door handles 8 Attaching the cabinet doors Each Door Handle (KK) has pre-attached screws. Remove these screws and place the Door Handles (KK) over the predrilled holes in the Left and Right Doors (N and O). Lift the Left Door (N) and align the hinges with the preattached hardware on the main assembly as shown. Slide the barrel of the hinge on the door downward onto the pin of the hardware on the main assembly. Repeat steps with the Right Door (O).
Assembly (continued) 10 Attaching the upper back panel Locate the Upper Back Panel (M). Slide the Upper Back Panel (M) into the grooves between the Left and Right Media Shelf Partitions (J and K) as shown. Slide all the way down until the Upper Back Panel (M) meets the Top Panel (G). M 11 Attaching the magnetic door catches 12 Preparing the center shelf Insert bolts (EE) into pre-drilled holes in Center Shelf (I), but do not tighten all the way. Leave each bolt head about 1/8 in. out from the shelf.
Assembly (continued) 13 Attaching the center shelf to the upper assembly Align the pre-installed hardware on the edges of the partitions on the upper assembly with the pre-drilled holes in Center Shelf (I). Insert Screws (GG) through the shelf ( I ) and into the pre-drilled holes on the edges of the partition panels (K, L and J) as shown.
Assembly (continued) 16 Securing the back panels Place the Back Panel Brackets (II) between the back panels and the grooves of the assembly as shown. 17 Inserting the adjustable shelves Locate the two Adjustable Shelves (P). Insert the Shelf Pins (JJ) into the pre-drilled holes on the inside of each cabinet side panel at your desired height. Align all pins to the same height to ensure your shelf is level. Rest the Adjustable Shelves (P) on the Shelf Pins (JJ) as shown.
Assembly (continued) 19 Reinforcing the insert assembly Locate the Heater Box (EB) and align it behind the Control Panel Support. Secure the electric fireplace to the center shelf using Bolts (EE). Tighten on both sides using a Phillips screwdriver. 20 Assembling the log set Place the Log Set Left (EC) into the Ember Bed (EG) as shown. Repeat with the Log Set Right (ED).
Assembly (continued) 22 Assembling the fireplace Place the assembled log set into the back of the unit behind the glass panel. Push the tabs beneath the log set into the holes on the bottom panel. 23 Securing the log set Once the log set is in place, secure with Screws (BB) through the bottom of the log set and and into the bottom shelf. EG EG BB 24 Connecting the fireplace wiring Connect Key Button Connection Wire to heater. Insert the Ember Bed Connection Wire into the heater.
Assembly (continued) 25 Placing the fireplace background Locate the Back Panel (R). Only slightly bend the wallpaper and fit it into the back of the fireplace. Note that this back panel is reversible and can be placed with either side facing the fireplace insert for a customizable look. the fireplace 26 Securing background Place the Back Panel Brackets (II) between the Back Panel (R) and the grooves of the assembly as shown. Fasten each Back Panel Bracket (II) using Screws (HH).
Assembly (continued) 27 Installing the tipping restraint hardware When the Tipping Restraint Hardware (LL) is properly installed, it can provide protection against unexpected tipping of the unit due to small tremors, bumps or climbing. Each Tipping Restraint Hardware (LL) includes one Unit Anchor, one Wall Anchor, one Anchor Tether, and two Anchor Screws. Use these to complete the following steps for a proper installation. LL Wall Locate a secure wall stud behind the unit closest to the left side.
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. 1 Powering the fireplace 2 Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode. Push the Power button again to turn off all functions. Adjusting the flame There are 5 brightness levels that can be selected and OFF (00) setting. Settings F5 - F1 decrease in brightness.
Operation (continued) 6 Replacing the remote control battery 7 Disposing of used batteries When the remote control stops operating or its range seems reduced, it is time to replace the batteries with new ones. On the back end of the remote, press and slide the battery door open and remove the old battery. Insert two AAA batteries, checking that the + and sides of the battery match inside the battery compartment. Replace the battery compartment door. NOTE: Do not mix old and new batteries.
Operation (continued) 8 Power cord information This heater is for use on 120 volts. The cord has a plug as shown in the figure. Connect to properly grounded outlets only. Do not use a two-prong adapter. Never use with an extension cord or relocatable power tap (outlet/ power strip). 9 Patented Safer Plug® information This product is equipped with a Safer Plug®, which is an advanced safety device that helps prevent electrical fires caused from faulty outlets.
FCC/IC Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Troubleshooting PROBLEM ROOT CAUSE Fireplace has reached set temperature. Fireplace stopped heating before reaching Temperature around fireplace might be a few the desired temperature. degrees higher than other area in the room. CORRECTIVE ACTION Set the fireplace to a higher temperature or always “on”. Display shows " " The thermostat sensor is broken or disconnected. Unplug the fireplace, remove the back panel of the fireplace and check that the thermostat is plugged into the main circuit board.
Troubleshooting PROBLEM The remote control is not working. ROOT CAUSE CORRECTIVE ACTION There are no batteries. Change the remote batteries. The signal is poor. Operate remote transmitter at a slow measured pace. Press the remote control buttons with an even motion and gentle pressure. Repeatedly pressing buttons in rapid succession may cause the transmitter to malfunction. The remote is too far from the heater.
Replacement Parts For replacement parts, call our customer service department at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. Part Description Qty.
Notes 25 HomeDepot.com Please contact 1-877-527-0313 for further assistance.
Notes 26 HomeDepot.com Please contact 1-877-527-0313 for further assistance.
Notes 27 HomeDepot.com Please contact 1-877-527-0313 for further assistance.
Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.