Thank you for purchasing our Studio Designs, Inc. Merci d’avoir acheté un meuble Studio Designs, Inc. Gracias por comprar nuestro mueble Studio Designs, Inc. ® 2 PC VISION CRAFT CENTER Model #10055 Silver/Blue Modèle #10055 Argent/Bleu Modelo #10055 Plateado/Azul NOTE: This instruction booklet contains important safety information. Please read and keep for future reference. REMARQUE: Ce manuel d’instructions contient d’importantes informations relatives à la sécurité.
Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always place the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website: www.studiodesigns.com or call us. ! Warning! Glass Top Maximum Weight Capacity Limit: 25 lbs/11,34 kg.
Parts List • Liste des Pièces • Lista de Partes 1. Leg - 1 Left and 1 Right 2 Jambe - 1 Gauche Et 1 Droite Pata - 1 Izquierda Y 1 Derecha 2. Top Frame 1 Bâti Supérieur Marco Superior 3. Bottom Frame 1 Bâti Inférieure Marco Inferior 4. Glass Top 1 Table En Verre Mesa De Vidrio 5. Pencil Ledge 1 Bord de Crayon Borde para Lapiz 6. Drawer Bracket 2 Support de Tiroir Soporte de Cajón 7. Lift Mechanism 1 Mécanisme pour Élever Mecanismo de Elevacion 8.
Parts List • Liste des Pièces • Lista de Partes 9. Pencil Tray 2 Plateau pour Crayon Bandeja para Lapiz 10. Top Drawer Frame 1 Bâti Supérieure du Tiroir Marco Superior de Cajón 11. Center Drawer Frame 1 Bâti Centrale du Tiroir Marco Central de Cajón 12. Bottom Drawer Frame 1 Bâti Inférieure du Tiroir Marco Inferior de Cajón 13. Drawer 3 Tiroir Cajón 14. Locking Caster 2 Roulettes Bloquantes Rueda con Traba 15.
Parts List • Liste des Pièces • Lista de Partes 16. Bracket Support Soporte 8 17. Glass Spacer Coussin pour Verre Espaciador para Vidrio 2 18. Glass Spacer Coussin pour Verre Espaciador para Vidrio 4 19. Flanged Nut Écrou à Flasque Tuerca con Arandela 2 20. Nut Écrou Tuerca 2 21. Washer Rondelle Arandela 2 22. Allen Bolt - 1/4 in. X 2 in. Boulon Allen - 6mm X 50mm Perno Allen - 6mm X 50mm 4 23. Allen Bolt - 1/4 in. X 1.38 in. Boulon Allen - 6mm X 35mm Perno Allen - 6mm X 35mm 2 24.
Parts List • Liste des Pièces • Lista de Partes 31. Top Leg 1 Jambe Supérieure Pata Superior 32. Bottom Leg 1 Jambe Inférieure Pata Inferior 33. Foot Ring 1 Boucle de Pied Anillo para Pie 34. Seat 1 Siège Asiento 35. Leg Tube 4 Tube pour Jambe Tubo para Pata 36. Allen Bolt - 1/4 in. X 1-7/8 in. 4 Boulon Allen - 6mm X 47.6mm Perno Allen - 6mm X 47.6mm 37. Allen Bolt - 1/4 in. X 1-1/4 in. 5 Boulon Allen - 6mm X 31.8mm Perno Allen - 6mm X 31.8mm 38.
1 17 17 1 1 3 22 22 22 22 15 14 15 14 1. 2. 3. 4. Screw two Locking Casters (14) into holes in Legs (1). Screw two Non-Locking Casters (15) into holes in Legs (1). Attach Bottom Frame (3) to Legs using four Allen Bolts (22) (two holes face up - see arrows). Insert two Spacers (17 into holes in Legs. 1. 2. 3. 4. Vissez deux Roulettes Bloquantes (14) dans trous dans Jambes (1). Vissez deux Roulettes Non-Bloquantes (15) dans trous dans Jambes (1).
2 28 28 28 28 8 28 28 16 2 28 28 9 28 16 28 28 5 9 8 1. Attach eight Brackets (16) to Top Frame (2) using eight Phillips Screws (28). 2. Attach Paint Trays (8) and Pencil Trays (9) to Brackets. 3. Attach Pencil Ledge (5) to Frame using three Phillips Screws (28). 1. Attachez huit Supports (16) au Bâti Supérieure (2) à l’aide des huit Vis Cruciformes (28). 2. Attachez les Plateaux pour Peinture (8) et les Plateaux pour Crayon (9) aux Supports. 3.
3 18 18 2 18 18 24 21 23 26 7 21 23 21 20 19 3 27 27 6 6 1. 2. 3. 4. 5. Place Top Frame (2) onto Legs and attach using Washers (21), Nuts (20) and Allen Bolts (23). Attach Lift Mechanism (7) to Bottom Frame (3) using two Phillips Bolts (26) and two Nuts (19). Attach Lift Mechanism (7) to Top Frame (2) using two Allen Bolts (24). Insert four Spacers (18) into holes in Top Frame (2). Attach two Drawer Brackets (6) to Right Leg using two Phillips Screws (27). 1. 2. 3. 4. 5.
4 10 11 12 13 1. Attach Top Drawer Frame (10) to Center Drawer Frame (11). 2. Attach Center Drawer Frame (11) to Bottom Drawer Frame (12). 3. Slide three Drawers (13) into Drawer Frame. 1. Attachez la Bâti Supérieure du Tiroir (10) à la Bâti Centrale du Tiroir (11). 2. Attachez la Bâti Centrale du Tiroir (11) à la Bâti Inférieure du Tiroir (12). 3. Glissez trois Tiroirs (13) dans Bâti. 1. Fije el Marco Superior de Cajón (10) al Marco Central de Cajón (11). 2.
5 25 lbs. / 11,34 kg. 4 25 25 28 28 28 28 1. Attach Drawer Assembly to Drawer Brackets using four Phillips Screws (28). 2. Carefully place Glass Top (4) onto Top Frame and attach using two Allen Bolts (25) Please use care and good judgement when placing objects on top and shelves. DO NOT exceed the weight limits shown. 1. Attachez l'Assemblée de Tiroir aux Supports deTiroir à l’aide des quatre Vis Cruciformes (28). 2.
6 37 31 32 38 1. Attach Top Leg (31) to Bottom Leg (32) using Allen Bolt (37) and Nut (38). 1. Attachez le Jambe Supérieure (31) dau Jambe Inférieure (32) à l’aide de Boulon Allen (37) et Écrou (38). 1. Fije la Pata Superior (31) a la Pata Inferior (32) usando el Perno Allen (37) y la Tuerca (38).
7 34 31 32 37 37 37 37 36 38 38 36 36 38 35 35 33 36 35 35 1. Attach Seat (34) to Legs (31 and 32) using four Allen Bolts (37). 2. Insert Leg Tubes (35) into bottom of Legs (31 and 32). 3. Attach using Allen Bolts (36) and Nuts (38) (use same hole position for all Leg Tubes 35). 1. Attachez le Siège (34) aux Jambes (31 et 32) à l’aide des quatre Boulons Allen (37). 2. Insérez les Tubes pour Jambes (35) dans le bas des Jambes (31 et 32). 3.
LIMITED WARRANTY Studio Designs (the “Company”) warrants to the original purchaser that this product will be free from defects in its workmanship and materials, under normal residential use and service conditions, as described herein.