CORE™ 2 Console 5400-052-000 Instructions For Use Software Version ENGLISH (EN) 2017-05 Print Date: Jun 08, 2017 08:54:46 AM 0000221359, Rev. D Effective Date: Jun 1, 2017 10:00:55 AM (01)07613327358247 1.X.X 5400-052-700-EN Rev-D www.stryker.
EN 5400-052-700-EN Rev-D Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . 3 1.1 Audience . . . . . . . . . . . . . . . . . . . 3 1.2 Conventions . . . . . . . . . . . . . . . . . . 3 1.3 Contact Information . . . . . . . . . . . . . . . 3 2 Indications For Use . . . . . . . . . . . . . . . . . 3 3 Contraindications . . . . . . . . . . . . . . . . . 3 4 Definitions . . . . . . .
5400-052-700-EN Rev-D EN 1 Introduction 4 Definitions This manual contains information intended to ensure the safe, effective, and compliant use of this product. The symbols located on the equipment and/or labeling are defined in this section or in the Symbol Definition Chart. Refer to the Symbol Definition Chart REF 0036716-000 supplied with the console. Keep and consult this manual as necessary. 1.
EN SYMBOL 5400-052-700-EN Rev-D DEFINITION SYMBOL DEFINITION Flush Oscillating Footswitch 1 Phone Footswitch 2 Forward Power Preset/Representative Fuse Priming General Settings Quick Access General Warning Sign Handpiece Refer to Instruction Manual/Booklet Handswitch Rep Info Home Reset Import Reverse Initial Prime Roll-out Left Irrigation Roll-out Right Keyboard - Backspace Save Keyboard - Capital Letter OFF Scroll Down Keyboard - Capital Letter ON Keyboard - Spacebar Language L
400-052-700-EN Rev-D EN 5 Supplied Components This table identifies supplied components with the purchase of REF 5400-052-000. COMPONENT CORE 2 Console Console Power Cord Symbol Definition Chart Software License Addendum Instructions For Use (IFU) REF 5400-052-010 0996-851-XXX 0036-716-000 5400-052-704 5400-052-700 NOTES: ▪▪ If any component is missing or damaged, contact Stryker for assistance. ▪▪ For additional power cord information, see Appendix E: Power Cords.
EN 5400-052-700-EN Rev-D 7 Safety Directives ▪▪ ALWAYS follow the recommended duty cycle to prevent this equipment from overheating. 7.1 General Warnings ▪▪ DO NOT stack or place equipment adjacent to the console. If such a configuration is necessary, observe the configuration to ensure that electromagnetic interference does not degrade performance. WARNINGS: ▪▪ ALWAYS be familiar with the Instructions For Use and proper operation of this equipment before use.
5400-052-700-EN Rev-D EN 8 System Overview The CORE 2 Console has three handpiece ports, two footswitch ports, and one irrigation cassette port. The console supplies power to a variety of devices including small and large bone drills, small and large bone saws, small and large bone drivers, large joint and small joint shavers, ENT shavers, bone mills, and various footswitches. Additionally, the console supports the use of irrigation.
EN 5400-052-700-EN Rev-D 9 Hardware Features B A G F C E D Figure 2 – Console (Front View) A B C D Power Button Touch Screen Stacking Inserts (4) Stacking Feet (4) E F G I Irrigation Cassette Port Footswitch Ports (2) Motor Ports (3) J K L H M O N Figure 3 – Console (Rear View) H I J K Power Cord Pole Bracket Ethernet Port USB Port 8 Print Date: Jun 08, 2017 08:54:46 AM 0000221359, Rev.
5400-052-700-EN Rev-D EN 10 Screens and Menu Tabs Home Preset Volume System Settings Brightness Console Language System Info Motor List Select Motor Rep Info Control Permissions Import Import/Export Export Irrigation Motor 1 Motor Settings Motor 2 General Motor 3 Irrigation Motor Options Control Options Quick Access Figure 4 – Screens and Menu Tabs Map www.stryker.com Print Date: Jun 08, 2017 08:54:46 AM 0000221359, Rev.
EN 5400-052-700-EN Rev-D 11 Instructions WARNING: Before using this equipment, or any compatible equipment, read and understand the Instructions For Use. Pay particular attention to safety information. ALWAYS become familiar with the equipment before use. 11.1 Before the Procedure 1. Verify the console is placed on a sturdy, flat surface. 2. Verify the console is not within the sterile field. 3.
5400-052-700-EN Rev-D EN Figure 8 – To Insert an Irrigation Cassette Figure 6 – To Connect/Disconnect a Motor Figure 9 – To Remove an Irrigation Cassette Figure 7 – To Connect/Disconnect a Footswitch www.stryker.com Print Date: Jun 08, 2017 08:54:46 AM 0000221359, Rev.
EN 5400-052-700-EN Rev-D 11.4 Home Screen Instructions B C D E [Motor 1] 40000 RPM [Motor 2] 100 % [Motor 3] 90 % A [Name 1] Figure 10 – Home Screen A B C Navigation Bar Area – Provides navigational buttons and displays the active preset. NOTE: The reset button will appear within this area if the active preset has been modified. Press the reset button to undo changes. Footswitch Assignment Area – Provides a graphical representation of the current footswitch assignment.
