50 Ft. Retractable Cord Reel with Triple Tap Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
® Thank you very much for choosing a Strongway product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This cord reel is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway 50 Ft. Retractable Cord Reel with Triple Tap features a glow-in-the-dark stripe, grounded plug that lights, and an all-weather flexibility cord (-58° F to 221° F). The cord can be stopped at any point as you work. Its speed control device maintains the retraction of the cord, keeping the tension under control at all times.
was designed. Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial equipment. There are certain applications for which this equipment was designed. This product will be safer and do a better job at the capacity for which it was intended. DO NOT use this equipment for a purpose for which it was not intended. Industrial or commercial applications must follow OSHA requirements. ⚠WARNING WORK AREA SAFETY Inspect the work area before each use.
⚠CAUTION CORD REEL USE AND CARE Do not force the cord reel. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use. Carefully check that the product will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part. Do not use a product with a malfunctioning switch.
Grounding ⚠WARNING This machine must be grounded while in use to protect the operator from electrical shock. This unit is equipped with an electrical cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed and grounded in accordance with ALL local codes and ordinances. DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper receptacle installed by a qualified electrician.
Assembly Instructions 1. Unpack and inspect the cord reel for damage. Pull and relax the cord to check for a smooth operation. Check that the cord reel is able to completely retract. 2. The cord reel must be installed in locations conforming to current regulation and standards covering systems and work environments. 3. Secure the cord reel to the wall and the ceiling according to the installation diagram using screw anchors or screws. They must fit in the ø8.5mm holes of the brackets. 4.
Maintenance 1. Make sure the cord reel is in proper working order. 2. Clean the cord reel with a cloth dipped in warm water to remove dirt or other deposits, and ensure proper rewinding. 3. Do not use detergents or solvents which could prove incompatible with cable-winding materials. 4. Dismantling the cord reel can result in damage to the unit due to the preloaded springs. Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer.
Parts Diagram Page 10 of 14
Parts List Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Description Left side cover Screws M5x12 Washer Indicator light Screws ST3.5x16 Cord clamp Cord protective sleeve Import cord Wire way Connector Support plate Fixed pin Screws PT4.0x20 Base Roller Module for Stop-at-any-Point Baffle Supporting shaft Cord Stop block assembly Right shell Right side cover Screws PT4.5x16 Screws ST4.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.