Picture similar Digital Terrestrial Receiver PRIMA IV User Manual Bedienungsanleitung Manuel d’utilisateur Istruzioni d’uso Manual de usuario Návod k obsluze
PART 1 • English 1.0 INSTRUCTION 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Features & Accessories 2 2 3 3 3 2.0 CONNECTION 2.1 Connecting to TV and Terrestrial Antenna 2.2 Connecting to VCR 2.3 Connecting to a Digital Audio Amplifier 4 4 4 4 3.0 YOUR RECEIVER 3.1 Front Panel 3.2 Rear Panel 3.3 Remote Control 4 4 4 5 4.0 FIRST TIME INSTALLATION 5 5.0 MAIN MENU 5.1 Channel 5.2 Installation 5.3 Setup 5.4 Tools 5 5 7 7 8 6.0 OPERATION 6.1 Changing Channels 6.
PART 1 • English 1.0 INSTRUCTION 1.1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PART 1 • English English 4. The product has been dropped or damaged in any way. 5. The product exhibits distinct change in performance. Replacement Parts - When replacement parts are required, mare sure that the authorized service centre uses only parts with the same characteristics as the originals, as recommended by the manufacturer. Unauthorized substitution of parts could result in fire, electrical shock, or create other hazards.
PART 1 • English n n n Many channel handling options 3 Games (Tetris, Snake, Othello) Support of active antenna by 5 V output * Depending on local signal conditions; ** Availability depending on broadcaster Accessories: n 1 User Manual n 1 Remote control unit n 2x Batteries (AAA type) Note: The batteries should not be recharged, disassembled, electrically short-circuited or be mixed or used with other types of batteries.
PART 1 • English 3.3 Remote Control Fig. 4 Turns the receiver On/Standby Channel selection or value input Favourite group selection Mutes audio output of the receiver Opens the main menu Within menu you will get one step back 6. EXIT Exits from the menu or sub-menu 7. pq Menu Off: Change channel to previous/next. Menu On: Moves the cursor up/down. 8. tu Menu Off: Increases/decreases the volume level. Menu On: Change settings for specific Menus 9. OK Menu On: Activates the highlighted menu item.
PART 1 • English 5.1.1 TV Channel list 1. In Channel submenu select TV Channel List with the pq buttons and press OK to enter. 2. Use the tu buttons to change channel group (assumed you have already set up Favourite groups). 3. With the pq buttons select the channel you want to watch. With OK you can watch the selected channel in full screen mode. 5.1.1.1 Edit Use this menu to favour, lock, skip, delete and rename channel list. Press [1] to enter edit menu.
PART 1 • English 5.2 Installation 1. Use the pq buttons to select Installation, press OK to enter menu. 2. With the pq buttons select Auto Scan, press OK to enter the menu. 3. Press the tu buttons to change Scan mode, and use the pq to highlight Search, press OK to start auto scan. (All = Free-To-Air and scrambled channels/Free = only Free-To-Air channels) 5.2.2 Channel Scan 1. 2. 3. 4. Use the pq buttons to select Installation, press OK to enter the menu.
PART 1 • English 5.3.3 Region and Time Here you can set your region and time zone. Region: This menu is used for changing the region setting. GMT Usage: This menu is used for usage of GMT. The options are: Off / User Define / By Region GMT Offset: This menu is valid only when selected “User Define” in GMT Usage menu. The GMT offset range is “11:30 ~ +12:00”, increasing by half hours progressively. Date/Time: “Date” and “Time” menus are valid only when selected “Off” in GMT Usage menu.
PART 1 • English 5.4.2 Game 5.4.3 Load Factory Default This menu allows you to reset the receiver back to factory settings, which clears all stored channels and personal settings. 1. Enter “Tools” menu, select “Load Factory Default” and press OK, you are asked to input password. 2. Input a correct password using the numeric buttons (the default password is “0000”), a confirmation window is displayed. 3. Select “Yes” to return back to factory settings and clear all channels. Select “No” to cancel. 4.
PART 1 • English 6.2 Accessing the Electronic Program Guide (EPG) 1. Press EPG to enter EPG menu. 2. Press [2] to switch between channel list, events schedule of the selected channel and now/next events. 3. In the event schedule, press OK to book the selected event, press [3] to open the Detail menu for the selected event. 4. Press [1] to open the Booking list menu. 6.3 Accessing the favourite channels 1. Press FAV button to enter the favourite group list. 2.
PART 1 • English Demodulator Demodulator: Transmission mode: COFDM; 16-QAM/64-QAM 2K-8K Video Decoder Profile level: Video resolution: Decoding & Video Out: Aspect ratio: MPEG-2 MP@ML 720 x 576 pixels (PAL), 720 x 480 pixels (NTSC) PAL & NTSC 4:3, 16:9 Audio Decoder MPEG MusiCam Layer II Sampling rate: Audio mode: 32, 44.