Installation Guide

ManualsBrandsStrix Systems ManualsElectronics802.11 b/g Station

Table Of Contents

Edge Wireless System (EWS-150g)

If you encounter problems when installing this product, contact your service provider.

EDGE WIRELESS SYSTEM (EWS-150g)

This wireless network device has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

wireless network device generates, uses, and radiates

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. For technical

support, consult your Service Provider.

Quick Start Guide

Package Contents

1. EWS-150g unit

2. Antennas (2)

3. Ethernet cable (6 feet)

4. Power supply and cable (6 feet)

3 4

Connect the Antennas

Attach both antennas to the unit. Do not

apply excessive force when screwing on

the antennas—just finger tight.

Position the Antennas

Adjust both antennas to the uprigh

position until they snap into place.

Summary of content (4 pages)

PAGE 1
E DGE W IRELESS S YSTEM (EWS-150g) Quick Start Guide 1 Package Contents 1. EWS-150g unit 2. Antennas (2) 3. Ethernet cable (6 feet) This wireless network device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 2
4 Choose a Suitable Location For best reception, the EWS-150g should be located as close as possible to a window or an outside wall. 7 On the front panel of the unit, there are two LED indicators: • SIG For 802.11g wireless communication. A convenient power outlet is required within 6 feet of the unit, and the LAN source (your computer) must be reachable with the supplied Ethernet cable (unless you purchase a longer cable). 5 Power On the Unit • PWR Indicating that power is on.
PAGE 3
9 Monitoring The EWS-150g is equipped with a variety of monitoring features and a troubleshooting aid, all of which are available from the Monitor tab in the unit’s Web interface. In addition, there are several quick links on the home page that will direct you to the key monitoring functions. The home page also includes an Antenna Aimer, which allows you to monitor signal strength while manually directing the unit’s antenna (this function is only available from the home page).
PAGE 4
10 Troubleshooting This feature is provided as a convenient tool for testing your wireless configuration and associations. To initiate the troubleshooting tool, click on the Monitor tab then click on Troubleshooting to display the Troubleshooting window. Click on the Start Troubleshooting button to begin the process. 11 Antenna Aimer Available from the Home page, this tool is provided to assist you when attempting to find the optimum placement for the EWS-150g.