STREX Strex Wildlife Camera User manual SP48 Thanks for choosing Strex! Read the manual carefully for correct and safe operation of the product. Always follow these instructions for safe usage. If you have any questions about the product or encounter problems, you can contact us by email: info@strex.
INTRODUCTION Thanks for choosing Strex! Read the manual carefully for correct and safe operation of the product. Always follow these instructions for usage. If you have any questions about the product or encounter problems, you can contact us by email: info@strex.nl Strex Wildlife Camera For professionals, hobbyists, hunters and nature lovers Whoever or whatever you want to observe, the reliable Strex Wildlife Camera can bring you closer than ever.
CONTENT ! English 1. Structure ....................................................................................... 5 2. Specifications ............................................................................... 7 3. Installation guide ......................................................................... 8 4. Review footage ............................................................................. 9 5. Settings ........................................................................
PRODUCT INTRODUCTION Some tips before you start • If a DC power adapter is used to power the camera, please make sure there are NO batteries in the camera in order to prevent overcharging. This will cause permanent damage to the wildlife camera • Do not dip or submerse the wildlife camera underwater. • The configuration of the wildlife camera should be done when in “TEST” mode. The “ON” mode is only used when the installation is complete and ready for real world use.
1.
1. Structure COLOR DISPLAY SCREEN 8*AA BATTERIES COMPARTMENT MENU BUTTONS MENU BUTTONS MENU REPLAY SHOT Open the settings menu Start replay mode (show saved photos / videos) Manually take a photo or video depending on the configured recording mode. Videos are also stopped by pressing the SHOT button.
2. Specifications Photo Resolution 30MP / 24MP / 20MP / 16MP / 12MP Video Resolution 4K / 2K / 1080P / 720P / 480P (VGA) Detection Angle Up to 120° Detection Distance Up to 20 meters IR LED Wavelength 940nm (Low Glow) IR LED Quantity 36 pcs Trigger Speed 0.
3. Installation guide 1. Battery installation Open the battery cover and insert 8* AA batteries. Make sure the batteries are correctly placed (pos+ / neg-) Do not insert any batteries when using a DC power adapter. This will cause permanent damage to the camera! 2. Memory card installation Insert the micro SD memory card in the designated slot with the contacts (gold plating) facing away. The micro SD card should slide in freely with little resistance.
4. Review footage Option 1 : On the device Menu shot ok Slide the mode switch to “TEST”. Then click on the “REPLAY” button to view all images and videos. Use the menu buttons to navigate through all the footage. REPLAY Option 2 : microSD card Shut off the camera and take the microSD card out of the camera. You can now insert the microSD card into a suitable device such as TV, PC or Laptop to review all footage.
5.
6. Troubleshooting Camera doesn’t capture the desired objects ● Check the PIR sensitivity. For warm environments set the “PIR sensitivity” setting to “LOW” and for cold environments set the “PIR sensitivity” setting to “HIGH” ● Try to install the camera in an area where there are no external heat sources in the camera’s field of view. ● In some cases placing the camera near water will cause false positives / empty shots. ● Try to install the camera on stable and immovable objects such as large trees.
INHOUDSOPGAVE ! English 1. Structure ....................................................................................... 5 2. Specifications ............................................................................... 7 3. Installation guide ......................................................................... 8 4. Review footage ............................................................................. 9 5. Settings ..................................................................
PRODUCT INTRODUCTIE Enkele tips voordat je begint • Als een stroomadapter wordt gebruikt om de camera van stroom te voorzien, zorg er dan voor dat er GEEN batterijen in de camera zitten om overbelasting te voorkomen. Het gebruik van een stroomadapter en batterijen tegelijk zorgt voor blijvende schade aan de wildcamera. • Dompel de wildcamera niet onder water. • De configuratie van de wildcamera moet worden uitgevoerd in de “TEST” modus.
1.
1. Structuur KLEUREN SCHERM 8*AA BATTERIJEN COMPARTIMENT MENU KNOPPEN MENU KNOPPEN MENU REPLAY SHOT Open het instellingen menu Start terugkijk modus (bekijk de opgeslagen foto’s/video’s) Maak handmatig een foto of video, afhankelijk van de geconfigureerde opnamemodus. Video’s worden ook gestopt door op de SHOT-knop te drukken.
2. Specificaties Fotoresolutie 30MP / 24MP / 20MP / 16MP / 12MP Videoresolutie 4K / 2K / 1080P / 720P / 480P (VGA) Detectiehoek Up to 120° Detectie Afstand Up to 20 meters IR LED Golflengte 940nm (Low Glow) IR LED Aantal 36 pcs Triggersnelheid 0.2 seconds Waterbestendigheid IP66 Bedrijfstemperatuur -20°C to +70°C SD Kaart Type Up to 256GB TF Card (Class 10) Voedingstype Battery / External Batterijtype AA battery (4/8pcs) Werkspanning 6V Externe adapter DC 6V 1.
3. Klaarmaken voor gebruik 1. Batterij plaatsen Open de batterijklep en plaatst 8* AA batterijen. Zorg ervoor dat de batterijen correct geplaatst zijn. (PLUS+ / MIN-) Let op! Plaats geen batterijen als je gebruik maakt van een stroomadapter. Dit zorgt voor permante schade. 2. Geheugenkaart plaatsen Plaats de microSD geheugenkaart in de juiste sleuf met de contacten (verguld) naar beneden gericht. De SD kaart moet vrij naar binnen kunnen schuiven met weinig weerstand.
4. Beeldmateriaal terugkijken Optie 1: Op de camera zelf Menu shot ok REPLAY Schuif de modus schakelaar naar “TEST”. Druk vervolgens op de knop “REPLAY” om alle afbeeldingen en video’s te bekijken. Gebruik de menuknoppen om door alle afbeeldingen te navigeren. Optie 2: MicroSD kaart MICRO SD micro usb switch Schakel de camera uit en haal de microSD kaart uit de camera. Je kunt de SD kaart nu in een geschikt apparaat steken zoals een TV, computer of laptop om het opgenomen beeldmateriaal te bekijken.
5.
6. Probleemoplossingen De camera legt de gewenste objecten niet vast ● Controleer de PIR-gevoeligheid. Voor warme omgevingen stel je de instelling “PIRgevoeligheid” in op “LAAG” en voor koude omgevingen stel je deze in op “HOOG” ● Probeer de camera te installeren in een gebied waar zich geen externe warmtebronnen in het detectieveld van de camera bevinden. ● In sommige gevallen zal het plaatsen van de camera in de buurt van water valse positieven / lege opnamen veroorzaken.
Manual information All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. For permission requests at the address below. STREX SBD Trading B.V.