Mounting instructions Instructions de montage R&R Power Charger USB Curve/CW R&R-Charge-USB Streetlife reserves the right to modify the dimensions and specifications Think before printing 02020592
English Information for the installer The installer must have the knowledge and competence to perform the installation safely and within the applicable standards. Local regulations and environmental conditions - to be determined by the installer - may affect the proper installation. The installer is responsible for providing that the feed line to 1 (one) or more Power Charger USB modules is protected with a fuse or a circuit breaker of maximum 4 Ampere.
Français Informations pour l'installateur L'installateur doit avoir les connaissances et l'autorité nécessaires pour installer l'installation en toute sécurité et conformément aux normes applicables. Les réglementations locales et les conditions environnementales à déterminer par l'installateur peuvent affecter le bon fonctionnement de l'installation.
Requirements #13 Steel Tie Wrap Minimal requirement for storage of wood: 4 - 12
Parts 1x R&R-Charger USB 2x M8x80 Hexagon Head Wood Screw MON-40H Cable Casing 1x Cable Casing 1x Pin Torx Set-40H Floor or wall mounting material is not included 5 - 12
Options Open position is correct position for R&R-Charger USB? >> Page 10 R&R-Charger needs to be positioned somewhere else? >> Page 9 6 - 12
R&R-Charger needs to be positioned somewhere else? STEP 1 Required Tools #13 7 - 12
STEP 2 Required Tools #13 1x R&R-Charger USB 2x M8x80 Hexagon Head Wood Screw 8 - 12
Cable Casing STEP 3 Required Tools 1x Cable Casing 1x Pin Torx Set-40H 9 - 12
STEP 4 Steel Tie Wrap* *Steel Tie Wraps are not included 10 - 12
STEP 5 1 24v 2 24v *24v transformer is not included 11 - 12
Certification is the most rigorous approval process for RF Devices with the greatest potential to cause harmful interference to radio services. It is an equipment authorization issued by an FCCrecognized Telecommunication Certification Body (TCB) based on an evaluation of the supporting documentation and test data submitted by the responsible party (e.g., the manufacturer or importer) to the TCB. Testing is performed by an FCC-recognized accredited testing laboratory.
