AD Plus2.
AD Plus2.0 User Manual Revision History Revision Date 2022-04-08 Version V1.
AD Plus2.0 User Manual Contents 1. Overview...........................................................................................................................................3 1.1. System Introduction.......................................................................................................................... 3 1.2. Function Overview............................................................................................................................ 3 2.
AD Plus2.0 User Manual 1. Overview The AD Plus2.0 User Manual is intended to help users to better understand and apply the powerful functions available in the device system. Please note that only professional personnel can set the device. Please note that only professional O&M personnel can set the device. Streamax reserves the right of final interpretation of this document and the right to modify this document or information and descriptions therein.
AD Plus2.0 User Manual Turn on Wi-Fi and GPS on your mobile phone before connecting the device with the truck EasyCheck app. After the AD Plus2.0 device is powered on, it will remain in AP mode within 2 minutes. Then, run the truck EasyCheck app on your mobile phone and tap SEARCH. The screen listing the Wi-Fi hotspots found is displayed. During the first login, the Wi-Fi hotspot is named after the encrypted chip number of the AD Plus2.0.
AD Plus2.0 User Manual Tap on the upper right corner. The menu including Help, About, and Logout is displayed. Tap Logout to log out of the connected device. Tap Help to view the help document of the truck EasyCheck app, as shown in the figure below. Tap About to view the version information of the truck EasyCheck app on your mobile phone.
AD Plus2.0 User Manual 2.3. General On the General screen, you can view the real-time status of the device, import/export parameters, logs, and other files, and upgrade the software. Basic Info: shows the server connection status, IO level status and use, OBD data, G-Sensor data, ACC status, pulse status, and device status. Device Module: shows the status of the Wi-Fi, 3G/4G, and positioning modules of the device.
AD Plus2.0 User Manual Positioning information: it is used to check the satellite positioning signal quality of the device, and help the installation, operation and maintenance personnel to evaluate the positioning capability and quality of the device, so as to perform corresponding maintenance actions. On this screen, the top row indicates the number of active satellites and the total number of satellites. PRN in the list below indicates the serial number of the satellite.
AD Plus2.0 User Manual Version Info: shows the software version information. On the Version Info screen, you can locally upgrade the version of the MDVR, IPC, R-Watch, communication module, GPS, or power box. A USB adapter cable is required to connect to a USB flash drive or the EasyCheck App with the SD card for the upgrade. To upgrade the required item, tap displayed confirmation prompt box, tap OK. Page 8 of 66 .
AD Plus2.0 User Manual Other: allows importing/exporting O&M logs, restoring default settings, and rebooting the device. A USB adapter cable is required to connect to a USB flash drive or the EasyCheck app with the SD card for data import/export operations. It allows logging in to the device via the EasyCheck app to perform the following operations: 1. Export alarm logs, user logs and black box files 2. Export alarm capture images of the selected time period 3.
AD Plus2.0 User Manual 2.4. Preview On the Preview screen, you can view the real-time recording, turn on/off the sound or guide, and perform AI calibration. 2.4.1 Viewing Real-Time Recording On the Preview screen, you can view the real-time recording of each channel of the device. Double-tap on the preview screen of a channel to zoom in and double-tap again to return to the normal screen. If the camera is damaged or not connected, "VIDEO LOSS" will be displayed. 2.4.
AD Plus2.0 User Manual ⑥ Select the two check boxes. ⑦ Tap Next.
AD Plus2.0 User Manual ⑩ Tap Next (tap Learn more to learn how to calibrate the ADAS camera). ⑪ Tap Next. ⑫ Select the check box. ⑬ Tap the required source of speed from Satellite, Pulse, OBD, and ATrack. ⑭ Select the required IO for the left/right turn signal in Left Turn/Right Turn respectively. ⑮ Tap the required signal source type from Source Voltage and Source Pulse. Usually, Source Pulse is selected. ⑯ Tap Next.
AD Plus2.0 User Manual ⑰ After checking that the left and right signal cables are properly connected, tap Complete. The calibration of the ADAS camera is completed. 2.4.2.2 DSC Calibration ① On the home screen, tap Preview.
AD Plus2.0 User Manual 2.4.2.3 ⑥ Select left-hand drive or right-hand drive for the steering wheel (left-hand drive indicates that the steering wheel is on the left of the cockpit when the driver is seated in the cockpit and facing toward the front direction; right-hand drive indicates that the steering wheel is on the right of the cockpit when the driver is seated in the cockpit and facing toward the front direction) ⑦ Tap Save to save the operation.
AD Plus2.0 User Manual 3. Click DMS for calibration 4. Choose the channel corresponding to the DMS camera 5. Click Calibration for the next step 6. Confirm the prompt--Click Next for the next step 7. For the installation location of the DMS camera, the left A-pillar, the right A-pillar, the front side of the countertop, and the lateral side of the countertop are available. If you have any questions, please click each option in turn, and refer to the legend and description on the right.
AD Plus2.0 User Manual with the actual installation method) *Note: Before clicking Next to start formal calibration, the driver shall sit in the normal driving posture and look straight ahead. 8. Click Next to move on to the next step for automatic face calibration. During calibration, make sure that the driver sits still according to normal driving habits and posture and looks straight ahead.
AD Plus2.0 User Manual Calibration completed Click OK to complete the calibration and exit the calibration mode. 2.5. Playback 2.5.1. Video Playback On the Playback screen, you can search for the main-stream video/sub-stream video in the main storage/sub-storage on a certain date.
AD Plus2.0 User Manual On the Playback screen, select a date from the calendar for video playback. On the left part of the screen, you can select the year and month. Tap and to select different years and months. In the calendar, the color of the strip under a date indicates that videos were recorded on that day.
AD Plus2.0 User Manual 2) You can drag the 3) Tap on the upper left corner of the screen to reduce the time interval and tap to enlarge the time interval. This function allows you to quickly locate a certain time period for the next playback/export operation when there are many video segments. 2.5.2. to any position in the timeline below. Channel No.: 1) The colored strip for each channel indicates the video types in different time periods.
AD Plus2.0 User Manual In the video export options, you can choose to export the cropped video to an external USB disk or mobile phone, so that O&M personnel can quickly obtain and share the video.
AD Plus2.0 User Manual 2.6. Basic Setup Note: On all parameter configuration interfaces, tap Save to save the modified parameters and tap Default at the bottom of the screen to restore the default settings of the parameters. 2.6.1. Registration Information On this screen, you can set Device Info (Device ID), Vehicle Info (Vehicle Plate, License Plate, and Vehicle VIN), and Driver Info (Driver Number and Driver Name).
AD Plus2.0 User Manual is available only when Time Zone is set to UTC+0) Time Sync: The time will be synchronized automatically when there is a deviation between the system time and the actual time. In the automatic time synchronization settings, you can enter the date and time manually, or set the time synchronization method. 1. Tap Change Time to modify the date and time manually. 2. Satellite: allows you to synchronize time with the GPS. 3. NTP: allows the system to use the WAN network time.
AD Plus2.0 User Manual DST: For some regions, you need to set the DST due to the time zone reason. Specifically, you can set the start & end time, and offset in weeks or days. Tap Preferences > Basic Setup > Time Setup > DST, as shown in the following figure: 2.6.3. 1. Enable: allows you to enable or disable the DST function. It is disabled by default. 2. Offset: can be set to One Hour or Two Hours. 3. Mode: can be set to Week or Date. 4.
AD Plus2.0 User Manual device). 2. Ignition Delay: allows you to set the time for the delayed shutdown after the car key is turned off, which can be set from 0 to 86399 seconds, and the default is 300 seconds. 3. Video Recording Delay: allows you to set the time for the video recording after the car key is turned off. The configurable time range changes with the ignition delay. The maximum time for video recording delay is subject to the ignition delay.
AD Plus2.0 User Manual the set value in the sleep status. 6. Low Volt Upload: automatically reports the low voltage to the platform after being selected when the low voltage protection is triggered. 7. Note: When the low voltage protection is not enabled, 7 V is the judgment condition for low voltage protection by default. 8.
AD Plus2.0 User Manual the first N9M server is supported for remote wakeup; 4. Telephone Wake/SMS Wake: wakes up the MDVR by calling or sending SMS messages to the device. You need to set the mobile number to wake up the device in advance. Power Box Choose Preferences > Basic Setup > Time Setup > Power Box. The displayed screen is as shown in the following figure: Set the shutdown and wake-up thresholds controlled by the power box 1.
AD Plus2.0 User Manual 2.6.5. 1. Tap Add to add a user. 2. Tap 3. admin (Admin): The system has an administrator account by default. The administrator has the permission to add/delete common users and set parameters. It can add a maximum of two common users. 4. user (Normal User): only has the permission to query settings. in the Setup column to set the password for the user login.
AD Plus2.0 User Manual N9M: indicates the protocol type for the device to report information to the video surveillance platform CEIBA2. 808: indicates the protocol type for the device to report information to the 808 platform (not used for overseas trucks). 4. Enable Network: can be set to Local, WIFI, or Communication Module. 5. Register Server IP: specifies the IP address of the register server of the platform to which the device reports information. 6.
AD Plus2.0 User Manual 99admin,120223,WIFI2,WEP,streamax,streamax,1! 99admin,120223,WIFI2,NONE,streamax,1! Client mode: Command parameters: Mode, Encryption Type, ESSID, Account, Password, Static Enable, Static IP Address, Subnet Mask, and Gateway! 0 indicates that the static IP address is enabled and 1 indicates that the dynamic IP address is enabled. Example: 99admin,120223,WIFI1,WEP,streamax,streamax,1! 99admin,120223,WIFI1,WPA/WPA2-PSK,streamax,streamax,1! 99admin,120223,WIFI1,WPA2.
AD Plus2.0 User Manual 1. DHCP Mode: indicates that the device automatically obtains the IP address. After it is selected, the network automatically allocates a dynamic IP address, and the DNS address can be dynamically or statically customized. 2. Static IP: indicates that the device uses the static IP address. If the preset static IP address is used, the DNS address must be specified statically. 3. Direct Port: Set to 80 by default. This port will be used for IE access.
AD Plus2.0 User Manual button, the button is disabled.) Client: In this mode, the device can automatically search for a valid Wi-Fi hotspot nearby for connection. After the successful connection, the device can automatically connect to this hotspot after rebooting or re-entering this area. By default, the AP mode is used upon the startup. If the device is not connected with the EasyCheck app within 3 minutes, it will automatically switch to the client mode.
