User's Manual

Airplane Mode Off
WiFi
Bluetooth
On
Notifications
Carrier
Sounds
Brightness
Wallpaper
Settings
Bluetooth
Bluetooth On
DEVICES
Stream1
Password GEAR4STREAM
Enter Password
Cancel Connect
5V/1A
POWER ON
13.5V/1.5A
FREE YOUR TUNES - PREMIUM AUDIO ANYWHERE
FREE YOUR TUNES - PREMIUM AUDIO ANYWHERE
FREE YOUR TUNES - PREMIUM AUDIO ANYWHERE
FREE YOUR TUNES - PREMIUM AUDIO ANYWHERE
FREE YOUR TUNES - PREMIUM AUDIO ANYWHERE
FREE YOUR TUNES - PREMIUM AUDIO ANYWHERE
FREE YOUR TUNES - PREMIUM AUDIO ANYWHERE
Airplane Mode Off
WiFi
Bluetooth
Your WiFi Network
Notifications
Carrier
Sounds
Brightness
Wallpaper
Settings
Airplane Mode Off
WiFi
Bluetooth
HomeStream
Notifications
Settings
Airplane Mode Off
WiFi
Bluetooth
DirectStream
Notifications
Settings
FREE YOUR TUNES - PREMIUM AUDIO ANYWHERE
3
GEAR4 HK Limited declares that this portable speaker [WF003] is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/CE. It’s possible for you to download a complete copy of this declaration on the website www.gear4.com/DOC.
GEAR4 HK Limited déclare que cette enceinte portable [WF003] est conforme aux principales exigences et autres clauses pertinentes de la directive
européenne 1999/5/EC. Vous trouverez la version complète de cette déclaration sur notre site Web: www.gear4.com/DOC.
EU License Importer (Germany):
STRAX GmbH, Belgische Allee 52 + 54, 53842 Troisdorf
For product support, visit:
Pour l’assistance produit, consultez le site :
Para obtener soporte para el producto, visita:
Produktsupport erhalten Sie unter:
Per assistenza sul prodotto, visitare:
Para assistência de produto, visite:
Ga voor productondersteuning naar:
För produktsupport går du till:
Tuotetukea saa osoitteesta:
For at få produktsupport kan du besøge:
For produktstøtte, gå til:
Wsparcie dla produktów na stronie:
Если Вам необходимы услуги поддержки, зайдите на сайт:
Ürün destegi için www.gear4.com adresini ziyaret edin.
www.gear4.com
Copyright© 2016 GEAR4 HK Limited. All rights reserved.
Reproduction in part or in whole is prohibited. GEAR4 is a trade mark of GEAR4 HK Limited.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, inc.Copyright© 2016 GEAR4 HK Limited.
All rights reserved.
Reproduction intégrale ou en partie interdite. GEAR4 est une marque de GEAR4 HK Limited.
Le mot Bluetooth® et les logos sont des marques déposées de Bluetooth SIG, inc.
Model No. WF003, Speaker Output 20w, 2x 10w
Battery information: 3.7V 4400mAh Rechargable
Bluetooth Specifications: Bluetooth V2.1
FCC ID: POEWF003, IC:20322-WF003
V0.1
AUX IN POWER OUT, EXTERNAL CHARGING
1 Toggle the Source button until the AUX In icon shines green.
Connect a 3.5mm cable between the AUX In socket on the
rear of the speaker and your external music device.
1 Toggle the Source button until the Bluetooth LED is lit
blue colour.
1 Connect your iPhone/iPad or Android device to your home
WiFi network.
1 Connect the power to the speaker. 1 Switch the speaker to HomeStream mode. 1 Power on and switch the new speaker to HomeStream mode. 1 Switch the speaker to HomeStream mode. 1 Switch the speaker to DirectStream mode. 4 Input the password ‘GEAR4STREAM’ and press connect.
2 Press the connect button. The WiFi LED will flash white and
yellow to indicate the speaker is in WiFi pairing mode.
3 Switch on your device. Open the settings page and select
the ‘HomeStream’ speaker.
3 Open settings on your device and select ‘DirectStream’
in the WiFi settings menu.
5 Open the GEAR4 App and select the ‘Stream 3’ speaker.
You are now ready to select a source and enjoy playing music.
3 Press the Pair/Share button on the new speaker for 3 seconds.
The WiFi LED will turn solid yellow when your speaker
is connected.
4 Open the GEAR4 App, go to GROUP then Speakers and
click on the new speaker to add it to the group.
You are now ready to select a source and enjoy
playing music.
2 The WiFi LED will be solid yellow and the Pair/Share LED
will be solid orange
. The yellow 1,2,3 LED’s will slowly
flash, this will indicate the speaker is ready to pair.
2 Press the Pair/Share button once on your first connected
speaker. The Pair/Share and WiFi LED’s will flash to
indicate the speaker is in search mode. When the speaker
is connected the white and orange LED’s will turn solid.
4 Open the GEAR4 App, go to GROUP then Speakers and
click on the new speaker to add it to the group.
You are now ready to select a source and enjoy
playing music.
NOTE: Your speakers must be connected to the same
router as your device.
4 Open the GEAR4 App, click Configure Speaker and
select Add New Speaker. Select the ‘Stream 3’ speaker.
Follow the instructions on the App.
NOTE: Your speakers must be connected to the same
router as your device.
3 Press and hold down the Pair/Share button on the new
speaker for 3 seconds. The Pair/Share LED will turn solid
white when the speaker is connected.
1 Power on and switch the new speaker to DirectStream mode.
2 Press the Pair/Share button on your first connected
speaker. The Pair/Share and WiFi LED’s will flash to
indicate the speaker is in search mode.
When the speaker is connected the yellow and orange
LED’s will turn solid and the 1,2,3 LED’s will flash.
4 The WiFi LED will turn solid white when the setup is
complete.
5 Launch the GEAR4 Music App. Click New Group.
Create a group by selecting the ‘Stream 3’ speaker.
You are now ready to select a source and enjoy
playing music.
NOTE: Your speakers must be connected to the same
router as your device.
2 Press the power button.
2 Install the GEAR4 Stream App from the Apple or Google
Play Store.
NOTE: Make sure that you are connected to the same WiFi
network as you plan to set the speakers up on.
3 The LED’s will flash white, green and orange while the speaker
is booting up. It will take approximately 20 seconds for the
speaker to start up. After the speaker is fully boo
ted the
LED will indicate the source. The white LED will slowly flash
to indicate the speaker is in pairing mode.
2 Press and hold the connect button for 3 seconds. The
white WiFi LED will flash quickly to indicate the speaker
is in WiFi pairing mode.
3 Press the WPS button on the router.
NOTE: the WPS process is based on your Router’s User Guide.
3 Open the settings on your device. Turn on Bluetooth
and select and connect your ‘Stream 3’ speaker.
2 The blue LED will flash.
4 The Bluetooth LED will turn solid blue.
5 Select and play music from the internet or any App.
NOTE:
a) The speaker must be powered on to activate the power
out function.
b) If the speaker is idle for 15 minutes it will
automatically power o.
Connect a USB charging cable to the USB Power Out and
charge your device.
SELECT
‘STREAM 3
BLUETOOTH SET UP
INSTALLING THE GEAR4 APP POWERING UP
HOMESTREAM SET UP USING THE WPS BUTTON ADDING MORE SPEAKERS TO THE HOMESTREAM NETWORK
HOMESTREAM SET UP USING THE GEAR 4 STREAM APP DIRECTSTREAM SET UP ADD MORE SPEAKERS TO A DIRECTSTREAM NETWORK
TURN ON
BLUETOOTH
GEAR4 One-Year Warranty
GEAR4 HK Limited, trading as GEAR4, warrants this product to be free from defects in workmanship and materials at the point of sale. Subject to this
product being used in accordance with its instructions for use, the product shall continue to be free from defects, for a period of one (1) year from the
date of original purchase. Any damage or defects caused by a failure to follow the instructions which relate to this product or as the result of an
accident, abuse, misuse, misapplication, product modification, faulty ancillary equipment, improper voltage or current, lightning or other acts of God,
commercial non-home use, normal wear and tear, shipping damage or loss, damage to digital media players or damage caused by the actions of
anyone other than GEAR4 HK Limited are expressly excluded from the warranty stated above. GEAR4 HK Limited will, at its sole election, repair or
replace any product that proves to be defective in either or both of workmanship or materials and as covered by this warranty. If the product is no
longer manufactured or is out of stock at or after the time GEAR4 HK Limited learns of the warranty claim, GEAR4 HK Limited may, at its sole election,
replace your product with a similar product. GEAR4 HK Limited’s liability is limited to the repair or replacement, of any defective product under
warranty and any incidental or consequential damages are expressly excluded to the fullest extent permitted by law. This warranty is not transferable
and does not extend to users other than the person who originally purchased the product.
Nothing in this manual shall limit or exclude liability of GEAR4 HK Limited for death or personal injury resulting from GEAR4 HK Limited’s negligence, for
fraud or fraudulent misrepresentation or breach of the terms implied by Section 12 of the Sale of Goods Act 1979. This warranty gives you specific
legal rights in addition to the ones afforded you by the laws of your country. This warranty is not intended to operate to limit such legal rights.
Warning
To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Caution
Use of controls or adjustments of performance or procedures other than those specified may result in hazardous radiation exposure.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Unpacking and installation
Unpack your unit carefully. We recommend that you save the packaging in case you ever need to store your unit. To avoid damage, never place the
unit or its batteries near radiators, in front of heating vents, under direct sunlight or near water.
For your safety
Never handle the unit with wet hands, as this could cause fire or electric shock.
Refer servicing to qualified personnel only. Do not open the housing. Unplug the unit during lightning storms and when unused for extended periods of time.
Disposal
According to the European Directive 2002 / 96 / EC all electrical and electronic products must be collected separately by a local collection system.
Please act according to your local rules and do not dispose of your old products with your normal household waste.
The wheeled bin mark indicates that this product should not be disposed with other household waste throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
FCC Rules
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
INDUSTRY CANADA
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
"Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter
by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication. This Class B digital apparatus complies with Canadian ICES-003.
Australian Consumer Law
In Australia, the Trade Practices (Australian Consumer Law) Amendment Regulations 2010 (No. 1) apply. Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Attention
L'utilisation des commandes ou les réglages de performances par des procédures autres que celles spécifiées risquent d'entraîner une exposition à des
radiations dangereuses. Les piles (piles incluses ou installées) ne doivent pas être exposées à une chaleur excessive, notamment aux rayons directs du soleil, à
une flamme ou source similaire.
Déballage et installation
Déballer l'appareil avec soin. Nous recommandons de conserver l'emballage, pour tout stockage prolongé éventuel de l'appareil. Pour éviter tout endommagement,
ne jamais placer l'appareil ou ses batteries près d'un radiateur, près d'une bouche d'aération, sur un rebord de fenêtre exposé au soleil ni près d'une source d'eau.
Dans l'intérêt de la sécurité
Ne jamais manipuler l'unité avec des mains mouillées, sous peine d'électrocution ou d'incendie. Consulter exclusivement un personnel qualifié pour toute
réparation. Ne pas ouvrir le boîtier. Débrancher l'appareil pendant les orages avec foudre et lorsqu'il n'est pas utilisé pendant une période prolongée.
Mise au rebut
Conformément à la directive européenne 2002 / 96 / EC, tout appareil électrique ou électronique doit être collecté séparément par un système local de collecte des
déchets électriques et électroniques. Respecter les lois et réglementations en vigueur et ne pas mettre au rebut dans les déchets ménagers.
Le symbole avec une poubelle barrée signifie que ce produit ne doit pas être mis au rebut avec les déchets ordinaires. Afin d'éviter tout risque à
l'environnement ou la santé humaine lié à des mises au rebut non contrôlées, procédez à un recyclage responsable afin de promouvoir la réutilisation
durable des ressources physiques. Pour renvoyer votre matériel usagé, utilisez les programmes de renvoi et collecte ou contactez votre revendeur qui
pourra se charger du recyclage responsable du produit.
FCC
Toute modification non expressément approuvée par la partie responsable de la conformité risque d’annuler le droit d’utilisation de cet équipement.
Cet équipement a été testé et est conforme aux limites imposées aux appareils numériques de classe B, conformément à la section 15 des règles de la FCC.
Ces limites ont été conçues pour protéger les installations domestiques contre les interférences néfastes. Cet équipement génère, utilise et émet de l'énergie
sous forme de fréquences radio et, en cas de non-respect des instructions d'installation et d'utilisation, risque de provoquer des interférences.
Il n'existe aucune garantie contre ces interférences. En cas d'interférences radio ou télévisuelles, pouvant être vérifiées en mettant hors, puis sous tension
l'équipement, l'utilisateur peut tenter de résoudre le problème de l'une des façons suivantes :
- Réorienter ou déplacer l'antenne de réception ;
- Éloigner l'équipement du poste de réception ;
- Brancher l'équipement sur une prise appartenant à un circuit différent de celui du poste de réception ;
- Consulter le revendeur ou un technicien radio/TV qualifié.
DÉCLARATION DE LA FCC SUR L’EXPOSITION AUX RADIATIONS
Ce dispositif répond aux limites de la FCC sur l’exposition aux rayonnements établies pour un environnement non-contrôlé. Il doit être installé et utilisé en
respectant une distance minimale de 20 cm entre la source de radiations et votre corps. Cet appareil est conforme à la section 15 des règles de la FCC. Son
utilisation est assujettie aux deux conditions suivantes :
(1) Cet équipement ne doit pas provoquer d’interférences, et
(2) Ce périphérique doit tolérer les interférences, ce qui inclut les interférences qui risquent de provoquer un dysfonctionnement du périphérique.
INDUSTRIE CANADA
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur)
approuvé pour l’émetteur par Industrie Canada. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Gear4
Stream3
Quick Start Guide
Artwork Annotations
Cutter
Dimensions
Width
Height
Width
Height
Depth
FLAT
140 mm
140 mm
840 mm
140 mm
0 mm
1:1
Version Notes
Changes from V0.1:
Version
Created
Modified
Product details
0.1
13 05 2016
Material Specifications
Weight XXXgsm
Print Specifications
Litho print CMYK 4 col
P322C
P3265C
Spot colours
Finishes
Total number of cols/specials
Gloss lamination
7
Scale

Summary of content (1 pages)