User's Manual

The device under test is manufactured by the grantee (Strattec Security Corporation), and sold as
an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must ensure
the end-user has all applicable / appropriate operating instructions. When end-user instructions are
required, as in the case of this product, the grantee must notify the OEM to notify the end-user.
Strattec Security Corporation will supply this document to the reseller/distributor dictating what
must be included in the end user’s manual for the commercial product.
INFORMATION TO BE INCLUDED IN THE END USER’S MANUAL
The following information (in blue) must be included in the end product user’s manual to
ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be
included in the manual if the device label is not readily accessible to the end user. The
compliance paragraphs below must be included in the user's manual.
******************************************************************************
FCC ID: OHT-4892056 IC: 5461A-4892056
This device complies with Part 15 of the FCC Rules and with Industry Canada’s licence-exempt
RSSs. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Note: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
******************************************************************************