PORTABLE HOME VIDEO SECURITY SYSTEM 2.4 GHz 1.8” Color TFT LCD Monitor With Wireless Camera SG5550 This product broadcasts over public airwaves and its video and audio signals may be intercepted without your consent. FOR MORE INFORMATION Before operating the system, please read this manual thoroughly and retain it for future reference.
CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of two Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage“ within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SAFETY INSTRUCTIONS IMPORTANT SAFEGUARDS All the safety and operating instructions should be read before the appliance is operated and retained for future reference. 1. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 2. FOLLOW INSTRUCTIONS - All operating instructions should be followed. 3. WATER AND MOISTURE - Do not use this video product near water – for example, a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement.
TABLE OF CONTENTS PAGE INTRODUCTION & FEATURES……………………………………… 1 SYSTEM INCLUDES………………………………………………….. 2 CONTROLS AND FUNCTIONS Monitor Controls – Front Panel ...….……………………..……... Monitor Controls – Side Panels .....................……….….....…… Camera Controls ………………………………………………….. Docking Station Controls …………………………………………. 3 4 5 6 INSTALLATION Camera ......................................................……………….….... Monitor .....................................................................………......
INTRODUCTION: Thank you for purchasing the 2.4GHz Wireless 1.8” LCD Color Video System. This is an ideal solution for monitoring your child, business or home. The package contains a portable LCD monitor, a 2.4 GHz wireless color camera with Night Vision capability, and a power charging docking station for the monitor. The system is expandable up to 4 cameras (additional cameras sold separately) with the convenience of auto-sequencing between camera locations.
SYSTEM INCLUDES: 1.8” LCD screen – 2.4 GHz Color Monitor 2.
MONITOR CONTROLS – FRONT PANEL 1 2 3 4 5 6 8 7 9 10 1. 2.4GHz Antenna - High gain dipole antenna receives audio and video signal from the camera. 2. LCD - 1.8” Color Screen. 3. Channel Indicator - Shows which Channel the monitor is set to (1-4). Channel 1 is represented on the left side - Channel 4 on the right side. 4. Channel Selector - Manually switches between channels 1-4. 5. Display On/Off - Turns the LCD Screen Display On/Off on the monitor.
MONITOR CONTROLS – SIDE PANELS 4 6 1 7 2 3 5 1. Audio Sensitivity - Sets the sensitivity level for the alarm Audio triggering (refer to page 10 for more information). 2. ON/OFF Switch - Switches the power on the monitor ON or OFF. 3. DC Input Jack - Connect to the supplied 6V DC 800 mA AC adapter. Note: If Power is connected via the Docking Station, this input is not required as the monitor will draw Power from the Docking Station. 4.
CAMERA CONTROLS 1 2 3 4 6 5 7 8 1. CDS Sensor - Turns on the IR emitters in low light conditions. 2. Infrared LED’s - Enhance the picture quality in low light conditions. 3. Lens - Color CMOS Image Sensor. 4. Microphone - Built-in condenser microphone provides listen-in audio capability from camera to monitor. 5. ON/OFF Power Button - Controls power to the camera. 6. Channel Selector Switch - Slide switch set the camera’s channel (1-4) 7. DC IN Jack - Connects to the 6V DC (300mA) adapter. 8.
DOCKING STATION CONTROLS 2 1 4 3 1. Cradle - Carefully slide the monitor downward into the docking cradle. The monitor now has the added feature of Audio / Video Out for connection to a larger monitor (such as a TV) or a VCR. 2. Charge Indicator - Illuminates when both Power and the Monitor are connected. The Docking Station will recharge the batteries in the monitor provided that you have inserted Rechargeable batteries. (Please refer to Page 8 for recharging time.) 3.
CAMERA INSTALLATION NOTE Ensure the power switch on the monitor and camera are set to the OFF position before proceeding with the following steps. OPTION #1 OPTION #2 WALL DESK Option 1: You can place the camera on a desk or any leveled surface. Select a location that is near an AC outlet and within reach of the AC adapter cord. You can adjust the camera head vertically to the best viewing angle. Option 2: For wall mounting, use the supplied mounting bracket and screws.
MONITOR INSTALLATION 6V DC 800 mA AC Adapter Note: Connection of the Monitor to the Docking Station is optional. The benefits of the Docking Station are: A/V Out and Battery Charging. If using the Docking Station, connect the supplied 6V DC 800 mA adapter to the DC INPUT JACK at the rear of the Docking Station and plug it into an electrical outlet. Alternatively, you can bypass the Docking Station and plug the adapter directly into the DC INPUT JACK on the side of the monitor.
OPERATION Camera (1) Connect the power adapter to the camera power input and turn on the camera by pressing Power. Ensure the camera is set to channel 1. Monitor (1) Connect the supplied power adaptor to the power input of the monitor or the Docking Station. Turn on the monitor by switching Power ON/OFF to ON. The LCD will display Channel 3 by default. (2) Use the channel selector switch button to ensure the monitor is set to the same channel as the camera to view the picture.
ALARM ALERT This video security system is equipped with an Audio-based Alarm system, which alerts you of sound at the camera. To activate the Alarm feature, hold the Alarm button on the monitor for 2 seconds. A red light will illuminate to indicate that Alarm mode is active, and the monitor will go to Standby mode (video will not appear on the LCD screen, and the speaker sound will cease). An Alarm is activated when sound at the camera site is detected.
AUTO SCANNING This video security system provides you with the option to automatically switch between the four camera locations. If you have fewer than four cameras, you can also set the system to scan between three or two locations. Setting Auto Scan to 2 or 3 camera locations: 1. Press and hold the Auto button for more than 2 seconds. All four LED lights on the front of the monitor will turn ON. 2. Continue to press and hold the Auto button. The Channel 4 LED will turn off.
CONNECTING THE MONITOR TO A TV In order to view video from the camera on a larger screen than the 1.8” LCD, you can use the Video/Audio output from the Docking Station as shown in the diagram below and view the video on TV. Please note: To view the picture on the TV, you must select an A/V or AUX channel. RCA cable Connections for recording Similarly, the monitor can also be connected to a VCR. Connect the supplied audio/video cable from the back of the monitor to the Audio/Video Inputs of a VCR.
13
TECHNICAL SPECIFICATIONS MONITOR Display Resolution Viewing Angle Camera Capable Wireless transmission Power Source Battery Option 1.8” Color LCD 280 x 220 pixels 90º (L/R) Up to 4 Up to 300 feet (open space) 6V 800 mA Adapter (included) 4 “AA” Batteries (not included) CAMERA Image Device Picture Element Lens Viewing angle Minimum Illumination Power Source Battery Option Color 1/4” CMOS 510 x 492 pixels 3.6 mm 60º 3 LUX @ F2.
CARE AND MAINTENANCE: Please follow these instructions to ensure proper care and maintenance of this system. Keep your monitor and camera dry. If it gets wet, wipe it dry immediately. Use and store your unit in normal temperature environment. Extreme temperatures can shorten the life of the electronic devices. Handle the monitor carefully. Dropping it can cause serious damage to the unit. Occasionally clean the unit with a damp cloth to keep it looking new.