2011 Strata Proximity Systems Surface Proximity Module Users Manual v1.0 Strata Proximity Systems, LLC 1769 Jeff Road Huntsville, AL 35806 1.800.691.
Strata Proximity Systems Surface Proximity Module Users Manual v1.0 Confidential Confidential and Proprietary October 6, 2011 Table of Contents 1 2 Overview .............................................................................................................................3 1.1 Theory of Operation ......................................................................................................3 1.2 Frequency of Operation ..................................................................
Strata Proximity Systems Surface Proximity Module Users Manual v1.
Strata Proximity Systems Surface Proximity Module Users Manual v1.0 Confidential Confidential and Proprietary 1.2 October 6, 2011 Frequency of Operation The Underground Proximity Generator will transmit on a frequency of 73 kHz and receive on a frequency of 916.48 MHz 1.3 Label Information The Surface Proximity Module label is located on the bottom face of the shunt. A picture of the Strata label is below: The Strata label defines the model and serial number of the Surface Proximity Module. 1.3.1.
Strata Proximity Systems Surface Proximity Module Users Manual v1.0 Confidential Confidential and Proprietary 1.4 October 6, 2011 FCC Information The FCC ID for the Underground Proximity Generator is ZQ3-SPS-SPROX. When configured by Strata for underground use, the device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference.
Strata Proximity Systems Surface Proximity Module Users Manual v1.0 Confidential Confidential and Proprietary 2.2 October 6, 2011 Charging The Surface Proximity Module is directly powered from the controller board or other modules (duals) and requires no internal battery or charging. 2.3 Alerts Although the Surface Proximity Module has LED visual indicators, it is not designed to alert the user. The LEDs are used mainly for set up and diagnostics of the system. 2.
