2011 Strata Proximity Systems Surface PAD Model HA‐S‐2200‐S Users Manual v1.0 Strata Safety Products, LLC 8995 Roswell Rd Ste 200 Sandy Springs, GA 30350 1.800.691.
Strata Proximity Surface PAD model HA‐S‐2200‐S Users Manual v1.0 2011 Table of Contents 1 2 Overview ................................................................................................................................. 3 1.1 Theory of Operation ......................................................................................................... 3 1.2 Frequency of Operation ................................................................................................... 4 1.
Strata Proximity Surface PAD model HA‐S‐2200‐S Users Manual v1.0 1 2011 Overview The Surface PAD is part of a complete HazardAvert proximity warning system from Strata Proximity Systems which provides warnings to both individuals and to vehicles and machinery to alert them that the individual wearing the PAD has entered too close to an operating piece of equipment and is in a dangerous situation or that vehicles or machinery are getting close enough that a collision possibility exists. 1.
Strata Proximity Surface PAD model HA‐S‐2200‐S Users Manual v1.0 2011 916‐ES transmitter Integrated Circuit. The TXM‐916‐ES generates and frequency modulates a 916.48MHz carrier with the data sent from the PIC microcontroller on the PAD System Board. The RF Transmitter board has no alignment procedure as the TXM‐916‐ES treanmitter has a self contained crystal controlled PLL oscillator. This transmitted 916.
Strata Proximity Surface PAD model HA‐S‐2200‐S Users Manual v1.0 2011 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Strata Proximity Surface PAD model HA‐S‐2200‐S Users Manual v1.0 3 2011 Warranty Initial system hardware components will be warranted to be free of defects for a period of one (1) year from in service date. Subsequent component purchases will be warranted one year from receipt acknowledgement. Warranted replacement or repair is not applicable in cases of physical damage or abuse as determined at the time of return or inspection. 4 Revision History 4.1 Version 1.