Operating Instructions 77GHz 2T4R RADAR SENSOR Please read this manual thoroughly before operating the radar, and keep it for future reference. V1.
Contents 1. Precautions................................................................................................ 1 2. Product Features ....................................................................................... 2 3. Technical Specifications ............................................................................. 2 4. Accessories ............................................................................................... 3 5. Installation ..........................................
1. Precautions ● Storage and Keeping 1) Do not expose the device to excessive heat or cold. The storage temperature of this device is -40~+90℃, and the operating temperature is -40~+85 ℃. 2) Never use this device in environments with excessive moisture, dust or smoke. 3) Avoid dropping or striking this device. 4) Never puncture, scratch or use abrasive cleaning materials on this device. 5) Do not place cables where they may be pinched or stepped on.
2. Product Features 1) 2) 3) 4) Advanced 77GHz microwave sensing technology. CAN BUS interface, comply with ISO 11898-2. Detect moving objects including any transportation vehicles, motorcycles, bicycles, pedestrians, etc. Work effectively in harsh environment and in poor visibility including darkness, smoke, fog and dust. 3. Technical Specifications 1) Frequency of Radar sensor: 76.00...77.00GHz. 2) Transmitter Type: FMCW. 3) Power Supply: 6 to 32V DC. 4) Power Consumption: 2.5W 5) Detection Range: 0.
4. Accessories Dual Sensors Transition cable (4 pin aviation interface, one female to two male) 3m red (Optional) Sensor Transition Cable 3m red (4 pin aviation interface, female to male) Sensor mounting Bracket (Optional) Silicone Pad Attention: “Optional” means that this is an optional accessory. 5. Installation Operation Manual & some installation accessories, some accessories may be excluded if they are optional. 5.
Important! Before the RADAR DETECTION SYSTEM is permanently installed to the vehicle, verify that the sensor mounting location provides a clear detection zone. Temporarily attach the sensor in the proposed mounting location, apply power to the system, and verify that nothing is being detected. 5.
6. Object Detection Capability Tips for Users Radar works on the principle of line of sight and relies on some of the electromagnetic energy transmitted by the sensor being reflected back from the object to the sensor. If an object does not reflect enough electromagnetic energy back to the sensor it will not be detected.
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.