User's Manual

WFM-1 Wireless Floor Mat Transmitter
User Manual
The WFM-1 Wireless Floor Mat alarm transmitter works together with a
pressure sensitive floor mat to send an alarm to a WR-1 or WR-2 Alarm
Receiver when pressure is exerted on mat. This is to give caregiver
warning that someone may try to exist a door way.
1. Installation
1.1 Connect the transmitter to the power cable of the floor mat.
1.2 Properly put the transmitter into the pocket of the floor mat. Keep
the connecting cable as far way from the transmitter as possible
1.3 Program the transmitter ID into the WR-2 receiver. Refer to the
Operation Procedure of WR-2 Receiver.
1.4 Position the floor mat in front of the door exit.
1.5 Test completion of installation by stepping over the mat to trigger
an alarm.
1.6 Test opening and closing of doors to make sure that there is no
obstruction to freely opening of doors.
2. Normal Operation
2.1 Do not put objects on top of mat surface. Doing this will defeat
the alarm function.
2.2 Unplug the power cable if the alarm function is not required for a
long period of time.
3. Transmitter Specification
RF frequency: 915 Mhz ISM band transmitter
Power: 3 V lithium battery
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
NTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY
TO OPERATE THE EQUIPMENT.