User's Manual

ManualsBrandsSTL International ManualsElectronics433MHz Radio Transmitter

User Manual for SI654 TVAnywhere

Controls and Indicators – Base Station

A. Video/Audio Input

1. RF in

2. Video In

3. Audio R in

4. Audio L in

5. Remote control IR receiver

B. Output connector

1. Remote Control IR Transmitter

C. Control buttons

1. Power On/Off Switch

2. Learn button

D. Indicators

1. Power On LED – red

a. Turn on by hardware to indicate Power is ON

2. Operating LED – Green

a. OFF – Standby mode

b. Always On – Normal TV mode

c. Flashing – IR learning mode

E. RF modules

1. Video channel : 2.4G Transmitter with three channels

2. Remote Control channel : 433.9Mhz receiver

Controls and Indicators - Remote Monitor

A. Input

1. Video channel from 2.4G

2. Battery charger contacts

B. Output

1. LCD screen

2. Stereo Speakers

3. Video/Audio Out 4 position phone Jack

4. Stereo Headset jack

5. Subwoofer jack

6. Power/Charge LED

Summary of content (5 pages)

PAGE 1
User Manual for SI654 TVAnywhere Controls and Indicators – Base Station A. Video/Audio Input 1. RF in 2. Video In 3. Audio R in 4. Audio L in 5. Remote control IR receiver B. Output connector 1. Remote Control IR Transmitter C. Control buttons 1. Power On/Off Switch 2. Learn button D. Indicators 1. Power On LED – red a. Turn on by hardware to indicate Power is ON 2. Operating LED – Green a. OFF – Standby mode b. Always On – Normal TV mode c. Flashing – IR learning mode E. RF modules 1. Video channel : 2.
PAGE 2
C. Control buttons 1. POWER 2. CH3. CH4. VOL + 5. VOL 6. MODE + 7. MODE 8. MODE D. RF modules 1. Video channel : 2.4G Receiver with three channels 2. Remote Control channel : 433.9Mhz Transmitter Accessories 1. 2. 3. 4. 5. 6. 7. 8.
PAGE 3
1. Power ON a. Press the power switch on the Base and the red LED should turn ON b. Press the POWER button on the remote. The green LED on the Base should lit and video should be displayed. 3. Power Off a. Press the POWER button on the Remote while power is on will turn off the power of the Remote and put the Base in standby mode. b. The green LED on th eBase should be off and the red LED should remain ON. c. To switch off power to the Base, press the power switch. The red LED will be Off 4.
PAGE 4
Mode Button Functions Common Operation a. Press MODE button to active MODE functions b. Press MODE button again to return to normal video viewing c. Press M+/M- buttons to select functions d. Press CH+/CH-, VOL+/VOL- to input parameters Operation of individual functions 1. TV/Video : to select video input from either TV tuner or Video In a. b. c. d. e. f. g. 2. Set 2.4G channel : to change the channel of 2.4G transmitter to avoid interference a. a. b. c. d. 3. Current 2.
PAGE 5
l. Press VOL+, button again to confirm the ADD function m. Display on second line “Channel nnn added” n. Press MODE key or timeout for 10 seconds, disable OSD and return to normal. o. p. q. r. s. t. u. v. 5.