Use and Care Manual

Expressions
Decorative
Inserts
PACKING LIST
Decorative Inserts (3)
Seam Covers (3)
LIGHT
DIFFUSER
PANEL
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622, USA
Phone [phone]
www.TheStileLife.com
995000643
6-18-19 (REV:03)
SEAM
COVER
PEG
SEAM
GAP
SEAM
COVER
BACK SIDE OF
SEAM COVER
DECORATIVE
INSERTS
DECORATIVE INSERT
INSTALLING THE DECORATIVE INSERTS
 Slightly bend the first decorative insert and place onto the ceiling fan, molding
around the diffuser. Slide the upper and lower edges of the decorative insert
behind the upper and lower edges of the fan’s housing to hold in place.
 Place the second and third decorative inserts around the diffuser in the same
manner. The ends of the inserts must line up with the seam gaps between the
light diffuser panels and will not overlap.
 After all three inserts have been installed, place the seam covers over the seams
of the inserts to secure in place. To install, slightly bend the seam cover and place
the upper and lower edges of the plate behind the upper and lower edges of the
fan’s housing in the same way the inserts were installed. The small pegs on the
seam cover should face the diffuser and be positioned in the gap between the
inserts.
DECORATIVE
INSERT
SEAM
COVER
LIGHT
DIFFUSER
PANEL
SEAM
GAP
SA1000 / SA1010 / SA1020 / SA1030