Owner Manual

1. Read this manual carefully before starting assemb ly. Read each step completely before beginning
each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons
before assembling or ordering parts.
3. Do not tighten hardware until instructed to do so. If hardware is tighten too soon, mounting holes
may not align and parts may not easily fit togeth er. Leave locknuts slightly loose until you are instructed to
tighten them.
4. Tools required for assembly: Phillips Screwdriver, Adjustable Wrenches, Rubber Hammer, 8mm Wrench,
5. To make assembly as easy as possible, place all parts of the table in a cleared area and remove the packaging
material. Do not remove parts from bags until you are ready to assemble that part. Do not dispose of the
Identification and the Exploded Drawings.
O W N E R ’ S M A N U A L
Please Do Not Return This Product To The Store!
Contact Escalade Sports customer service department at:
Phone: [phone] Toll-Free!
Fax: [phone] Toll-Free!
E-mail: [e-mail]
Mailing Address(correspondence only):
Escalade Sports
PO box 889
Evansville, IN 47706
Please visit our World Wide Web site at: www.escaladesports.com
ON-LINE TROUBLE SHOOTING TECHNICAL ASSISTANCE
ON-LINE PARTS REQUESTS FREQUENTLY ASKED QUESTIONS
ADDITIONAL ESCALADE SPORTS PRODUCT INFORMANTION
2L-5057-00
Escalade Sport products may be manufactured and/or
licensed under the following patents.
6120397, 5816957, 5769744, 5119741, 4911085, 4717157, D460140, D420563
TABLE TENNIS TABLE
Additional patents may be pending. One or more of the listed patents and/or pending patents may cover specific product.
MODEL NO.
T8561
2014 Escalade Sports
R
R
C
R
and 10mm wrench.
6.
An electric screwdriver is helpful in assembly. However, please set at low torque and use caution because you
could overtighten the hardware and strip the screws.
packing material until assembly is completed. For he lp in identifying parts, use the the Parts List, Hardware