User Manual ARCS-A/BT1 ARCS-B/BT1 ARCS-C/BT1 ARCS-D/BT1 ARCS-E/BT1 ARCS-F/BT1 ARCS-I/BT2 ARCS-J/BT2 ARCS-K/BT2 ARCS-AQ/BT1 ARCS-BQ/BT1 ARCS-CQ/BT1
ARCS Blue Upgradable readers Installation instructions ARCS Blue Lecteurs évolutifs Notice d’installation ARCS Blue Lectores escalables Procedimiento de instalación US conforme con NOM-024 -SCFI-2013 ES FR references ARCS- X: A: Standard X/BT1 B: Keypad C: Touch screen D: Standard + Biometrics E: Keypad + Biometrics F: Touch screen + Biometrics AQ: Standard + QR Code BQ: Keypad + QR Code CQ: Touch Screen + QR Code ARCSX/BT2 Connector J4 J6: Antenna connector J7: Keypad connector J9: Biometric co
ARCS Blue Upgradable readers Installation instructions ARCS Blue Lecteurs évolutifs Notice d’installation ARCS Blue Lectores escalables Procedimiento de instalación US conforme con NOM-024 -SCFI-2013 ES FR Relay Read-only reader: automatic tamper management (except touch screen) or activated on the reading of a valid identifier Touch screen read-only reader: if the bell is activated, contact J2 is used to connect the external ring (max. 200 mA at 28 Vdc).
ARCS Blue Upgradable readers Installation instructions ARCS Blue Lecteurs évolutifs Notice d’installation ARCS Blue Lectores escalables Procedimiento de instalación US conforme con NOM-024 -SCFI-2013 ES Smart mounting plate dimensions Version 1 Version 2 General tolerance following ISO NFT 58-000 standard. Scalability Scalability is a specific feature of the Architect® Blue series. Each reader is composed of three parts: one switchable cover, one RFID core and one smart mounting plate.
ARCS Blue Upgradable readers Installation instructions ARCS Blue Lecteurs évolutifs Notice d’installation ARCS Blue Lectores escalables Procedimiento de instalación US conforme con NOM-024 -SCFI-2013 ES FR Steps to remove the core from the front cover Clips Step 1 Step 2 Slots Do not use the buzzer as a lever Procedure to install the core into the front part And then pivot the core and press to insert it between the two clips. Place the core between the two slots at the top of the cover.
ARCS Blue Upgradable readers Installation instructions ARCS Blue Lecteurs évolutifs Notice d’installation ARCS Blue Lectores escalables Procedimiento de instalación US conforme con NOM-024 -SCFI-2013 ES FR Procedure to add the biometric (SE6) or 125 kHz module (SE8 ) or QR Code module (SE9) STid guarantees the good working order, compliance, technical support and after-sales service of the readers and modules (SE6, SE8 and SE9) that are installed as explained below, without any internal or external m
ARCS Blue Upgradable readers Installation instructions ARCS Blue Lecteurs évolutifs Notice d’installation ARCS Blue Lectores escalables Procedimiento de instalación US conforme con NOM-024 -SCFI-2013 ES FR Declaration of compliance STid declares that the ARCS-X reader is compliant with the essential requirements of the Directives RED 2014/53/EU and RoHs 2011/65/EU. A copy of our declaration is available on request from qualite@stid.com.
User Manual ARCS-G/BT1
13.56 MHz Desktop Reader Installation instructions 13,56 MHz Lecteur de table Notice d’installation 13.56 MHz Lector de mesa Procedimiento de instalación US conforme con NOM-024 -SCFI-2013 ES FR Product references ARCS-G/BT1 Characteristics USB USB 2.0 cable – Length 1.50m – Connector type A - chip FTDI Driver installation If the reader is shipped outside of the STid Software Kit: - Please, click on this url: http://www.ftdichip.com/FTDrivers.
