User Manual

Extracted from

User’s Manual RF95SW915LR / RF95SW915SR

Content

1. General ............................................................................................................................. 2

2. Application Information .................................................................................................. 2

3. FCC/IC Regulatory Information ...................................................................................... 2

3.1 Antenna implementation notes .............................................................................................................. 3

PAGE 1
Extracted from User’s Manual RF95SW915LR / RF95SW915SR Content 1. General ............................................................................................................................. 2 2. Application Information .................................................................................................. 2 3. FCC/IC Regulatory Information ...................................................................................... 2 3.1 Antenna implementation notes ...................
PAGE 2
1. General This device has to be installed and used in accordance with the technical description / installation instructions provided by the manufacturer. For detail information concerning type approval of this device please contact the authorized local distributor or the manufacturer. The system may only be implemented in the configuration that was authorized.
PAGE 3
.1 Antenna implementation notes This device has been designed to operate with the antennas listed below, and having a maximum gain of 0 dBi. Antennas not included in this list or having a gain greater than 0 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. The internal antenna for RF95SW915SR is described as following. Model Name: Manufacturer: steute Type: steute Ordering Number: Max Gain: PCB antenna 915 MHz steute 01.47.