Little Wing User Guide
Little Wing User Manual 2 Setting up your Little Wing 1. POWER ON/OFF To turn ON your Little Wing speakers, simply press the power button on the bottom of the speaker. The LED will light up and flash between blue and red and an audio cue will indicate the system is on. To turn the Little Wing speakers off, once again simply press the power button on the bottom of the speaker. The LED will fade out indicating power is OFF. 2.
Little Wing User Manual 3 4. BLUETOOTH® OFF ON Single Pairing: Only turn on ONE Little Wing speaker by moving switch to far right position (Sync). Wait for the unit to “BEEP” and then move switch to middle “On” position. Once powered on, the LED on the back of the Little Wing will rapidly blink BLUE, indicating the device is in pairing mode. On your mobile device select “LittleWing”. Your speaker is now connected and can be used for playback.
Little Wing User Manual 4 Connection Troubleshooting: If unable to connect to speakers with chosen pairing mode (Single/Dual) you need to clear the stored pairing information. Move the switch on both speakers to the far right (Sync) to clear all data. Wait 5 seconds and then move the switch to the OFF position on both units. Follow instructions above to re-pair in the desired mode. Technical Specifications Weight: 250g Power: 3W x 2 Input Voltage: 5V Driver size: 1.
Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.