User's Manual

ManualsBrandsSteelSeries ManualsElectronicsController

CONTENTS

CONTROLLER

QUICK START GUIDE

STICKER

COMPATIBILITY

-iOS -- Requires iOS 7 or later on one of the following devices:

•

iPhone 6, iPhone 6 Plus, iPhone® 5, iPhone 5c, iPhone 5s or later.

•

iPad® mini, iPad mini with Retina, iPad air, iPad 4th generation or later.

• iPod® touch 5th generation or later.

-MAC Support -- Works with Mavericks or later.

INITIALIZATION

1. Turn on controller by sliding the lock switch on the back of the controller to the

“unlcoked” position. Follow that by holding down the “menu” button for 1 second to

turn on the controller.

2. LEDs will light up

solid

for the first five seconds, indicating battery life.

3. All four LEDs will light up towards the right to indicate that the controller is searching

for a device.

4. To pair the Controller, go to your iOS device and follow the User Interface flow below:

Settings > Turn On Bluetooth > Search for new Devices

“SteelSeries Nimbus”

will be displayed on the screen. Click to Connect via

Bluetooth.

5. If the Controller has paired successfully, the LEDs will flash ON and OFF rapidly.

6. If the Controller is paired and the user starts a game, one of the four LEDs will light up

solid, depending on the player number.

7. When the Controller battery charge gets low (~20 minutes remaining), the LEDs will

start flashing continuously for 5 seconds.

Summary of content (4 pages)

PAGE 1
CONTENTS CONTROLLER QUICK START GUIDE STICKER COMPATIBILITY: -iOS -- Requires iOS 7 or later on one of the following devices: • iPhone 6, iPhone 6 Plus, iPhone® 5, iPhone 5c, iPhone 5s or later. • iPad® mini, iPad mini with Retina, iPad air, iPad 4th generation or later. • iPod® touch 5th generation or later. -MAC Support -- Works with Mavericks or later. INITIALIZATION 1. Turn on controller by sliding the lock switch on the back of the controller to the “unlcoked” position.
PAGE 2
Pairing: The Nimbus will remember the last paired iOS Device. When you reset the power on the Nimbus, it will automatically connect to the last paired iOS device. If you are already connected to an iOS device and want to change the device that you’re playing on, there are two ways to do this, as follows: If you want the controller to enter “pairing mode”, press the pairing button for 2 seconds. The LED’s should blink 1 and 2 followed by 3 and 4.
PAGE 3
uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Declaration d'exposition aux radiations:Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada etablies pour un environnement non controle.
PAGE 4
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.