User's Manual

ManualsBrandsSTEELMATE ManualsElectronicsMotorcycle Alarm System

986 MOTORCYCLE ALARM SYSTEM USER’S MANUAL

INTRODUCTION

Congratulations on your wise choice of our motorcycle security system.

The design comes from rich imagination of skilled and experienced electronics engineers and integrates our

experience of success. Our personal design always comes along all the vogue in the world.

In the production process computer automatic assembling and ICT technology is used to guarantee the high

quality and the reliability of the system. Strict delivery inspection makes the system complete in its

performance and excellent in its functions.

To avoid any lost which is caused by robbery, installing a high quality motorcycle alarm system is the best

choice.

Please read the circuit diagram carefully and install the system with a skilled mechanic to guarantee complete

installation.

Thanks

Summary of content (7 pages)

PAGE 1
986 MOTORCYCLE ALARM SYSTEM USER’S MANUAL INTRODUCTION Congratulations on your wise choice of our motorcycle security system. The design comes from rich imagination of skilled and experienced electronics engineers and integrates our experience of success. Our personal design always comes along all the vogue in the world. In the production process computer automatic assembling and ICT technology is used to guarantee the high quality and the reliability of the system.
PAGE 2
REMOTE FUNCTION AND OPERATOIN FOR MODEL 986 MOTORCYCLE ALARM SYSTEM FCC/ID Q6W986 FCC NOTICE: (b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 3
user's authority to operate the equipment.
PAGE 4
When the system is alarming, press button to stop chirping. 3. Engine immobilizing In arming mode, if turned the key on ACC position, the siren will alarm sharply, the light will flash and the engine will be immobilized automatically. Press to stop this function. 4.
PAGE 5
(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 6
z z Within 15 second after pre-alarm mode will trigger the system again. The control unit will send signal to the siren to change into interval chirp, the light flash simultaneously, the engine will be immobilized automatically and can not be started. In arming state, if someone try to unlock the motorcycle with key, the siren will chirp sharply with the direction lights flashing. The engine will be immobilized automatically and can’t be started. 2.
PAGE 7
. LED indicator (optional) In arming mode, the LED indicator will flash continuously Installation instructions: 1. Drill a hole ( 8) around the lock where it can be seen clearly. 2. Insert the outer bushing to the hole, 3. Insert the inner bushing with LED to the outer bushing and tighten them up 4. Connect the LED plug to the main unit of the alarm system. TECHNIQUE PARAMETER: Voltage: 12±2V Frequency: 433.92MHz Static Current: <5mA Current(max): 10A Remote Power: <10mW ATTENTIONS: 1.