5.25in Trayless Hot Swap Mobile Rack for 3.5in Hard Drive HSB100SATBK *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Installation..........................................................................
Introduction Thank you for purchasing a StarTech.com trayless SATA hard drive bay. Now, you can enjoy a truly portable storage solution, with the ability to insert and remove a bare SATA drive without having to mount it in a drive tray or drawer. Packaging Contents • 5.25” Trayless SATA Hot Swap Drive Bay • Manual • Screws • Keys System Requirements • An available 5.25” drive bay • 3.
Installation To ensure a quick and easy installation, please read through this section before attempting to install this device. WARNING: Hard drives require careful handling, especially when being transported. If you are not careful with your hard disk, it may result in lost data. Always handle your hard drive with caution. WARNING: Hard drives, like all computer equipment can also be severely damaged by static electricity.
5. Connect the SATA power cable and the SATA data cables to the appropriate ports provided on the back of the rear panel of the drive frame. Installing the hard drive into the drive frame 1. Pull the spring lock to open the front door. 2. Position the hard drive near the entry of the frame, with the label of the hard drive facing up, and the rear panel of the hard drive aimed towards the inside of the computer. 3. Gently push the drive into the frame until the locking arm begins to close. 4.
Specifications Form Factor Serial ATA Dimensions 184 x 149 x 42 (mm) Interface SATA, SATA II , SATA III Operating temperature 0° - 55°C Insertion rating Instruction Manual 50,000 insertions/removals 4
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.