Installation Instructions

5.25in Trayless Hot Swap Mobile Rack for 3.5in Hard Drive

StarTech ID: HSB100SATBK

This 3.5in SATA hard drive hot-swap bay allows you to install a 3.5in SATA drive in an available/unused 5.25in

drive bay. To remove the drive, it's as simple as opening the front panel door; to re-insert a drive, simply insert

the drive (connector first) until the door closes.

The hot swap bay offers a trayless design that makes it the ideal solution for quick and easy drive removals and

insertions as part of a system building process, or integration into rackmount systems or industrial environments.

To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane

supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.

Also a perfect addition for operating system image deployment and any task that requires being able to quickly

access large volumes of data on the fly, the hot swap bay provides everything you need to expedite important

projects while maintaining a reliable storage solution.

With support for SATA HDD speeds up to 6.0 Gbps, the mobile rack/backplane is fully compatible with RAID

installations to ensure maximum performance and versatility for enhanced storage applications.

Designed to provide a durable and reliable operating experience, the mobile rack features a 50,000+ insertion

rating and is backed by StarTech.com's 2-year warranty.

www.startech.com

1 800 265 1844

PAGE 1
5.25in Trayless Hot Swap Mobile Rack for 3.5in Hard Drive StarTech ID: HSB100SATBK This 3.5in SATA hard drive hot-swap bay allows you to install a 3.5in SATA drive in an available/unused 5.25in drive bay. To remove the drive, it's as simple as opening the front panel door; to re-insert a drive, simply insert the drive (connector first) until the door closes.
PAGE 2
Applications Add additional hot-swap bays to a server or workstation computer Replace or upgrade old IDE backplane with a SATA backplane System builders who need to image drives quickly and efficiently Environments where drives need to be replaced/removed regularly, without external protection for the drives required after removal Be able to replace/remove individual drives from a storage array with minimal or no system down time Features Holds a 3.5" SATA drive in a front accessible 5.
PAGE 3
Technical Specifications Warranty 2 Years Compatible Drive Types (Type and Rate) SATA Drive Size 3.
PAGE 4
Certifications, Reports and Compatibility www.startech.