VIDEO CONVERTER Professional VGA to NTSC/PAL TV Converter with Remote VGA2NTSCPRO Instruction Guide * Actual product may vary from photo Revised: February 4, 2003 The Professionals’ Source For Hard-to-Find Computer Parts
9 FCC COMPLIANCE STATEMENT Technical Support This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1 8 Troubleshooting Table of Contents If you are experiencing any difficulties with your converter, first make sure that all cables are firmly seated and connected to their proper ports. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 No video output. Using the On-Screen Display . . . . . . . . .
2 7 Introduction Color Bar Thank you for purchasing a StarTech.com VGA to NTSC/PAL television converter. This converter accepts your computer’s VGA signal and converts the graphic data into video format (composite, S-Video and analog RGB for SCART implementation). With great video quality and Zoom, Freeze, and numerous other adjustable functions, the VGA2NTSCPRO is the ideal tool for synchronizing your monitor and television screens. 1. Press the Menu button to call up the OSD menu.
6 3 Horizontal/Vertical Scaling Installation The VGA2NTSCPRO allows horizontal and vertical scaling so that an image can be scaled to meet the visible part of your TV screen. If you are in Zoom mode, vertical scaling is disabled. Rear View 1. Press the Menu button to call up the OSD menu.
4 5 6. Make sure that the Video/RGB button is set appropriately: IN for Composite or SVideo systems, OUT for SCART systems. 7. Plug the DC 9V power adapter into the DC9V port and an available power source. 8. Turn on your computer, monitor, and television. 9. Make sure that your television is on the proper “Video Input” channel. Consult the television manufacturer’s documentation if necessary. 10. Turn on the converter. You should now see an identical image on your monitor and television screen.