Quick Start Guide

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 06/21/2012
For the most up-to-date information, please visit: www.startech.com
RK819SIDEM / RK1019SIDEM / RK1219SIDEM
8U/ 10U/ 12U 19in Wide Wall Mount Side Mount Deep Open Frame Rack Cabinet
*actual product may vary from photos
Installation
To mount the cabinet to a wall, there are 4 anchor points on the side
panel of the cabinet. Please use the appropriate screws or bolts for
mounting heavy equipment to the specic type of wall (i.e. concrete,
drywall, etc.).
NOTE: Mounting points are 16” from center to center for mounting
to standard wooden studs.
Ensure the wall and mounting hardware will be able to support the
weight of the cabinet and any equipment that will be mounted into
it. Please be sure to observe proper safety procedures and use the
appropriate tools.
To install rack mountable equipment into the cabinet, use the
provided square cage nuts on the rack posts (install from rear
of posts), then use the provided cabinet screws to secure the
equipment to the cage nuts (from front of posts).
Packaging Contents
• 1 x Wall Mount Cabinet
• 1 x Bag of M5 Cabinet Screw
• 1 x Bag of M5 Cage Nut
System Requirements
• If mounting to a wall or other surface: Appropriate mounting
hardware for surface type
*RK1219SIDEM shown
WARNING! To prevent bodily injury, please ensure that the rack
is installed in a structurally sound environment with a level oor
and that all hardware has been assembled securely, and checked for
stability before loading equipment. When installing equipment into
the rack, start from the bottom of the rack rst and move upwards,
keeping the heaviest equipment at the bottom to avoid a situation
where the rack becomes top-heavy.