Owners manual

Quick-start guide
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
Manual Revision: 09/28/2016
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/PIB2MS1.
PIB2MS1
USB to mSATA Converter for Raspberry Pi and Development Boards
*actual product may vary from photos
Introduction
You can use the PIB2MS1 to connect an mSATA drive to a
development board to increase data storage capacity and
performance. The PIB2MS1 supports SATA I, SATA II, and SATA III
drives, mini mSATA drives, and mSATA SSDs.
Product diagram
Primary installation hole
(1 of 4)
Primary installation hole
(1 of 4)
Primary installation hole
(1 of 4)
Secondary
installation hole
Primary installation hole
(1 of 4)
Secondary
installation hole
mSATA mounting
holes
mSATA port
USB 2.0 header
USB 2.0 port
LED
Converter installed on a development board
Nut
Stando
Screw
Development board
(not included)
mSATA mounting hardware
AUX power connector
Jumper
Use to control
which interface
power is drawn
from
Package contents
• 1 x USB to mSATA converter
• 1 x USB-A to Micro-B cable
• 4 x standos
• 4 x nuts
• 4 x screws
• 2 x mSATA mounting screws
• 1 x quick-start guide
Jumper position Mode
USB powered
AUX powered