InfoSafe Mobile Drive Enclosure SAT2510U2 SAT2510BU2 IDE2510U2
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Instruction Manual Table of Contents Introduction ................................................................................... 1 Features.......................................................................................1 System Requirements..................................................................1 Package contents.........................................................................1 Installation and Usage...................................................................
Instruction Manual Introduction Thank you for purchasing a StarTech.com InfoSafe external hard drive enclosure. This product allows you to turn virtually any standard 2.5” notebook computer hard drive into a portable storage solution. The perfect solution for storing multimedia, digital imaging, audio, and other demanding applications, this product can be installed easily to suit virtually any storage necessity. Features • USB 2.0 compatible • Backward compatible with USB 1.
Instruction Manual Installation and Usage LED Indicator Mini USB Connector Bottom Panel Top Panel Installing a hard drive in the Enclosure CAUTION:Use caution when installing a hard drive in the enclosure. Excessive shock or force could damage the drive and/or the enclosure, resulting in data loss. Always ensure that you are properly grounded when handling a hard drive or the enclosure tray, since electronic components can be damaged by static electricity.
Instruction Manual 3. Attach the 2.5” hard drive to the interface connector (located on inverse of top panel), ensuring a snug connection. Do not use excessive force, to avoid damaging the drive and the the enclosure. 4. Insert the top panel and attached hard drive into the bottom panel. 5. Re-fasten the screws that were removed in step 2.
Instruction Manual Installing Drivers (Windows 98SE) Note: Windows ME/2000/XP/2003 Server and supported versions of Mac OS all support removable hard drives without additional software. As such, please ensure you have the most current updates installed. Computers running Windows 98SE need to install support for USB removable mass storage devices prior to using the enclosure: 1. Insert the installation CD into your computer’s CD-ROM or compatible optical drive. 2.
Instruction Manual Powering the Drive Enclosure The hard drive enclosure requires no external power supply, as it is capable of receiving enough power (5V/500mA) from the USB Bus to which it is connected. Please ensure that both USB type A connectors are inserted into available ports on the host computer. LED Indicator The hard drive enclosure offers an LED indicator, to enable you to monitor drive activity. When the enclosure is powered, the LED will illuminate and remain green.
Instruction Manual Removing the connected drive prior to receiving notification that it is safe to do so, could result in losing or corrupting data stored on the drive. Once the Safe to Remove Hardware message appears, please disconnect the enclosure from the computer by removing the USB connection. Mac OS 8+ To safely disconnect the attached drive from the host computer, close any windows listing the contents of the removable drive.
Instruction Manual Specifications Hard Drive support IDE2510U2: 2.5” IDE (ATA 100) SAT2510U2: 2.5” SATA / SATA II SAT2510BU2: 2.5” SATA / SATA II Connectors USB mini B Female Drive Capacity support 120GB, 5400 RPM Maximum Data Transfer Rate 480Mb/s Chipset IDE: Genesis GL-811E SATA: Sunplus SPIF-215A Operating System support Windows® 98SE/ME/2000/XP/Vista™ Mac OS 8 or Higher Dimensions 120 x 75 x 10 mm (4.72 x 2.95 x 0.39”) Weight 62.1g (2.19 oz.
Instruction Manual Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one-year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
