CompactFlash Card to IDE/SATA Adapter with 3.5” Bay Enclosure 35BAYCF2IDE 35BAYCF2SAT *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Front Panel Mount Configuration........................................................
Introduction Thank for purchasing a StarTech.com CompactFlash® Card adapter. This device provides a stable platform for use with CompactFlash media, installed in either the front or back of your computer based on individual needs, connected to the host computer using either an IDE (35BAYCF2IDE) or SATA (35BAYCF2SAT) connection. Packaging Contents • • • • • 1 x CompactFlash Adapter 1 x 3.
Front Panel Mount Configuration 35BAYCF2IDE pictured CF Ejection tab Master/Slave jumper 44-pin IDE connector SP4 Power connector 40-pin IDE connector Rear Slot Mount Configuration 35BAYCF2SAT pictured SP4 Power connector SATA connector Expansion Card Bracket (optional) CF Ejection tab Activity LED Instruction Manual 2
Installation Front Panel Mount Installation To install the CompactFlash adapter into the front panel of the computer: 1. Power down the computer. 2. Remove both sides of the computer case (tower), allowing easy access to the front panel 3.5” drive bay you wish to use (see your computer’s user manual for details, if necessary). 3. Remove a 3.5” drive bay panel from the front of the computer case (consult your computer’s user manual for details, if necessary). 4.
Rear Panel Mount Installation To install the CompactFlash adapter into the rear panel of the computer: 1. Power down the computer. 2. Remove the computer cover to provide easy access to the internal components of the computer. For more detailed instruction on how to perform this step, please refer to the documentation that was included with your computer at the time of purchase. 3. Using the screws provided, fasten the CompactFlash adapter to the rear bracket. 4.
Operating notes CAUTION: Please note that 35BAYCF2IDE and 35BAYCF2SAT require that the host computer be shut down when the CompactFlash card being used is inserted or removed. Removing or inserting a CompactFlash card while the computer is powered on could result in lost data or physical damage to the card or the card reader. Jumper Settings Please note that 35BAYCF2IDE allows you to select Master or Slave designation for the connected CompactFlash card, using an onboard jumper.
Specifications Host Interface Form Factor 35BAYCF2IDE 35BAYCF2SAT IDE/ATA SATA revision 1.0 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
