Users Manual

Starry Titan Poletop Mount

Note the dierence between two types of

Side Arm. One set is notched to be matched

with notch on Poletop Plate.

Mount is loosely assembled, all fasteners

snugged. One axis levelled, tightened, sec-

ond “tilt” corrected with mallet, all fasten-

ers tightened

Tools: 13mm socket, socket for AEP-supplied

pole bolts, mallet

PAGE 1
Starry Titan Poletop Mount Mount is loosely assembled, all fasteners snugged. One axis levelled, tightened, second “tilt” corrected with mallet, all fasteners tightened Tools: 13mm socket, socket for AEP-supplied pole bolts, mallet Note the difference between two types of Side Arm. One set is notched to be matched with notch on Poletop Plate.
PAGE 2
Starry Titan Poletop Mounting Radio 1. Complete radio head is preassmbled with a lifting eye. Open crate top and secure to lift/cherry picker arm. 2. The 4 bolts (circled) drop through keyholes in the poletop mount. Rotate radio ~6° to lock into place. Tool: 13mm combination wrench 3.
PAGE 3
Starry Titan Poletop Cabling 1.5” Conduits x2 Power 4x 14awg (2 48vdc pairs) and 1x 6awg ground Radios are pre-wired into the service box.
PAGE 4
Starry Titan Poletop SFP Replacement 1. Loosen top cover side screws and captive top screws. Slide up and off the unit. 2. Unlock the side needing replacement: Loosen two bolts (13mm socket and extension) 3. Tilt radio out slightly. Slide bolt carrier (red) out of engagement with radio frame (orange) 4. Gently lower radio to horizontal. Cable door is now accessible. Loosen lock knobs and swing down. 5. Swing locks down. Open cable door. Pull fiber. Unlock and remove SFP. Replace.