MINI MOBILE O P E R AT I O N S M A N U A L
Table of Contents Introduction 4 SurfLink Remote Microphone 6 Basic Use 6 Controls Overview 8 Operation 10 Low Battery and Recharging 10 Power On/Off Slider 12 Syncing 13 Built-In Microphones 15 LED 16 How to Wear 17 Streaming Audio 18 Interoperability with Other Accessories 18 Troubleshooting 20 SurfLink Mini Mobile Basic Use 22 Controls Overview 26 Operation 28 Low Battery and Recharging 28 Multi-function Push-Button 29 Power On/Off 29 Bluetooth Pairi
Introduction Package Contents • SurfLink Remote Microphone The SurfLink Mini Mobile system includes both the SurfLink Remote Microphone and SurfLink Mini Mobile Adapter. • SurfLink Mini Mobile Adapter The SurfLink Remote Microphone is designed to stream remote microphone audio directly to your 900MHz wireless hearing instruments. When worn by a distant speaker in noisy environments, SurfLink Remote Microphone functions as an assistive listening device.
Basic Use To quickly start using SurfLink Remote Microphone: 1. Power on SurfLink Remote Microphone. Green LED appears for 2 seconds. 2. Press “Sync” icon on slider button for 5 seconds until LED starts rapidly blinking blue. 3. Open one hearing instrument battery door, insert battery and close battery door. Green LED pulses to confirm successful sync. If you only have one hearing instrument, wait 20 seconds until red LED pulses.
SurfLink Remote Microphone Controls Overview 2 Recharging via Battery-Charging Cable. 2. Power On/Off Slider 3 4 •M oving the slider towards the microUSB jack powers on SurfLink Remote Microphone. •M oving the slider away from the microUSB jack powers off SurfLink Remote Microphone. Controls Overview Controls Overview 1. MicroUSB Jack for Recharging 3. Syncing Establishes the relationship between SurfLink Remote Microphone and hearing instruments. 1 6 4.
Operation 10 If SurfLink Remote Microphone is on and enters a low battery condition, the LED slowly pulses red and provides an audible indicator tone to a hearing instrument. The indicator tone is distinctly different from the low battery indicator for a hearing instrument, so there is no confusion as to which is experiencing a low battery condition.
Car Charger Adapter Syncing The SurfLink Remote Microphone can be recharged using a car charger adapter. These adapters can be obtained from your hearing professional (ask for part #52869-000). Syncing establishes a relationship between your hearing instruments and SurfLink Remote Microphone. For hearing instruments to receive streamed audio from SurfLink Remote Microphone, you must first sync the hearing instruments with SurfLink Remote Microphone.
The SurfLink Remote Microphone remains in an active syncing state for up to 20 seconds (concluded by red LED blink), or until one hearing instrument is synced with it (confirmed by a green LED blink). After successful syncing, each hearing instrument should automatically start streaming audio. If syncing did not yield the desired result, then repeat the process. To cancel syncing mode, turn off and then turn on SurfLink Remote Microphone.
LED How to Wear The LED indicator provides helpful information about SurfLink Remote Microphone: The SurfLink Remote Microphone can be affixed to clothing or worn on a lanyard. For better performance, SurfLink Remote Microphone should be within 8” (20cm) of the speaker’s mouth. LED BEHAVIOR SURFLINK REMOTE MICROPHONE STATE •S urfLink Remote Microphone is off and is not attached to a power source • If SurfLink Remote Microphone appears on but is not operational, then battery may need recharging.
Operation Interoperability with Other Accessories After SurfLink Remote Microphone powers on, it automatically begins streaming audio to synced hearing instruments. The LED slowly pulses blue to confirm that audio streaming is active and SurfLink Remote Microphone’s battery is operational. When SurfLink Remote Microphone is turned off, it automatically stops streaming audio.
Troubleshooting SYMPTOM / ISSUE One (or both) hearing instruments unexpectedly drop out of audio streaming. LED is rapidly blinking red continuously. Difficult to hear speaker in noisy environments. 20 POSSIBLE REMEDY Hearing instrument may be on the edge of wireless range. Move closer to SurfLink Remote Microphone. Battery level in hearing instrument can no longer support audio streaming. Replace hearing instrument battery with new one.
Basic Use Basic Use SurfLink Mini Mobile Basic Use To quickly start using SurfLink Mini Mobile: 1. Ensure SurfLink Remote Microphone has been properly setup with your hearing instruments and is in powered on state. 2. Insert the male microUSB jack of SurfLink Mini Mobile Adapter into SurfLink Remote Microphone’s female microUSB jack. 3. To turn on SurfLink Mini Mobile Adapter, press its push-button for 2 seconds and release when the green LED appears. 22 4.
Basic Use 9. To turn off SurfLink Mini Mobile Adapter, press the push-button for 2 seconds and release it. The red LED briefly appears to provide confirmation. Basic Use 7. A green LED confirms a successful Bluetooth pairing. 8.
SurfLink Mini Mobile Controls Overview Controls Overview 2. Male MicroUSB Jack 6 Attaches SurfLink Mini Mobile Adapter to SurfLink Remote Microphone. 3. Multi-Function Push-Button Controls Overview 1. SurfLink Mini Mobile Adapter Assumes different functionality depending on the current operational state of SurfLink Mini Mobile Adapter. 1 3 4. LED Indicator Identifies the current state of SurfLink Mini Mobile Adapter. 5.
Operation Multi-Function Push-Button Low Battery and Recharging Powering On/Off If SurfLink Mini Mobile Adapter is on and enters a low battery condition, the LED slowly pulses red until it automatically shuts down, or until a recharging power source is applied. When the Mini Mobile Adapter is attached to a power source, the LED becomes solid green and recharging automatically begins. When power is on, the solid green LED will be interrupted by other LED behaviors.
successful pairing with the Bluetooth device while a rapid blinking red LED denotes an unsuccessful pairing attempt. To cancel pairing mode on Mini Mobile Adapter, press the push-button for 2 seconds and release it, which powers off the Mini Mobile Adapter. Bluetooth Overview Bluetooth is a wireless communication technology used to transmit audio and data.
During an active phone call, SurfLink Mini Mobile Adapter picks up your voice so that the caller can hear it during the conversation. In noisy environments, position Mini Mobile Adapter closer to your mouth. ` Listening to Music or Other Streamed Audio Resetting To reset SurfLink Mini Mobile Adapter back to factory settings, ensure it is powered on and not Bluetoothconnected to other devices (the green LED will be slowly pulsing). Double-click the push-button so that the LED starts rapidly blinking blue.
Typical Use Cases To effectively use SurfLink Mini Mobile Adapter, it will need to be within easy reach so that you can quickly press the push-button to answer calls and speak into the built-in microphone. Typical operating scenarios include: SCENARIO OPTIMAL CONFIGURATION Distant talker wears just SurfLink Remote Microphone, which is powered on. You want to stream an active phone call to your hearing instruments. You want to stream music or other audio to your hearing instruments.
Troubleshooting SYMPTOM / ISSUE Streamed audio is too loud or too soft in hearing instruments. LED is slowly pulsing blue, but no streamed audio is heard in the hearing instruments. Streamed Bluetooth audio quality is inconsistent. Smartphone alerts are not always received. 36 POSSIBLE REMEDY Bluetooth device is streaming at non-optimal volume. Adjust volume control on the Bluetooth device. SurfLink Mini Mobile Adapter may be unattached from SurfLink Remote Microphone.
Regulatory Notices • Insert small screwdriver into a side housing corner and pry apart the housing halves. Required Information • Cut the battery wires from the circuit board to prevent accidental shorting. Waste from electronic equipment must be handled according to local regulations.
If you use other medical devices or wear implantable medical devices such as defibrillators or pacemakers and are concerned that your SurfLink Remote Microphone and/ or SurfLink Mini Mobile Adapter might cause interference with your medical device, please contact your physician or the manufacturer of your medical device for information about the risk of disturbance. Neither SurfLink Remote Microphone nor SurfLink Mini Mobile Adapter should be used during an MRI procedure.
Regulatory Information The SurfLink Remote Microphone and SurfLink Mini Mobile Adapter are designed to the following temperature ranges: •Operating: -10 to +45 degrees C (14 to 113 degrees F), humidity ≤ 95% non-condensing •Battery Charging: 0 to +45 degrees C (32 to 113 degrees F), humidity ≤ 95% non-condensing •Storage:-20 to +63 degrees C (-4 to 145 degrees F).
NOTE: Le manufacturier n’est pas responsable de l’interférence créée par la modification de cet équipement lors de l’écoute du téléviseur ou de la radio. De telles modifications pourraient entrainer la révocation de l’autorité de l’utilisateur à opérer cet équipement. The European version of the SurfLink Remote Microphone operates in the 863-865 MHz band with a maximum effective radiated power of 10 dBm. The SurfLink Mini Mobile Adapter operates in the 2.4-2.
Notes 44 Notes 45
© 2017 Paradigm, Inc. All Rights Reserved.