RIC (Receiver-In-Canal) O P E RAT I O N S M A N UA L
Table of Contents Select Hearing Instrument Size 10 Battery - Yellow Size 312 Battery - Brown Size 312 Battery - Brown Size 312 Battery - Brown Size 312 Battery - Brown Size 13 Battery - Orange Size 13 Battery - Orange Select Instrument Controls Automatic Volume Control p. 16 Adjustable Volume Control p. 16-17 Multimemory p. 18 Combined Volume and Multimemory Control p. 18 Overview RIC 10 Overview ..................................................... 4 RIC 312 Overview.....
RIC 10 Overview RIC 312 Overview Features, Controls and Identification Features, Controls and Identification Your hearing system controls include: Your hearing system controls include: 1. Hearing Instrument 1. Hearing Instrument 4 2. Cable 2 3. Receiver 3 1 5. Control Surface Switch 4. Microphones* 5. Push Button Switch or Rotary Volume Control 5 6. Battery Compartment (on/off control), Location of serial number, Location of left/ right side device indicator 8.
RIC 312 Overview RIC 312 Overview Features, Controls and Identification Features, Controls and Identification Your hearing system controls include: Your hearing system controls include: 1. Hearing Instrument 1. Hearing Instrument 2 4 2. Cable 3. Receiver 3. Receiver 1 4. Microphones 3 5. Rocker Switch 4. Microphones 1 3 5. Push Button Switch 6. Battery Compartment (on/off control), Location of serial number, Location of left/right side device indicator 6.
RIC 13 Overview RIC 13 Overview Features, Controls and Identification Features, Controls and Identification Your hearing system controls include: Your hearing system controls include: 1. Hearing Instrument 4 2. Cable 1. Hearing Instrument 2 4 2. Cable 3. Receiver 2 3. Receiver 1 4. Microphones 3 5. Control Surface Switch 1 4. Microphones 3 5. Push Button Switch 6. Battery Compartment (on/off control), Location of serial number 6.
Preparation Preparation Batteries Your hearing system uses a battery as its power source. This battery size can be identified by the orange (13), brown (312), or yellow (10) color code on the packaging. To insert or replace the battery: 1. Use the nail grip on the battery door. 2. Open the battery door gently and remove the old battery. 1 2 3 4 3. Remove the tab from the new battery. 4. Line up the battery’s “+” sign (flat side of the battery) with the “+” on the battery door. 5.
Preparation Preparation Battery Indicators Helpful Hints An indicator will sound when the battery voltage is low. You have approximately five minutes* to replace the battery. An indicator will sound just before the battery stops working. • NEVER FORCE THE BATTERY DOOR SHUT; this could result in serious damage; if the door will not close securely, check that the battery is inserted correctly.
Preparation Preparation Insertion and Removal Helpful Hints To insert the earbud or earmold: • Minor irritation and inflammation may occur as your ear becomes accustomed to having an object in it; if so, please contact your hearing care professional. 1. Hold the cable at the bend in front of the receiver with your thumb and forefinger. Gently insert the receiver into your ear canal (fig. 1). Figure 1 2. Wrap the hearing instrument over the top of your ear, carefully placing it behind your ear (fig.
Operation Operation On & Off Rotary Volume Control To turn ON: Insert a battery and completely close the battery door. Your hearing system uses a rotary volume control to adjust volume.Turn the wheel up (higher number) to increase volume. Turn the wheel down (lower number) to decrease volume. To turn OFF: Open the battery door until the battery is no longer touching the battery contacts. Your instrument has a Power-On delay and may require a few seconds to power on.
Operation Multimemory Your hearing care professional may be able to set up to four hearing programs for you. These additional programs are accessed by pressing the control surface/ push button/rocker switch. When you press the control surface/push button/rocker switch, you may hear an alert indicating the device has changed to the next program. Ask your hearing professional about your specific hearing programs.
Operation Manual Switching Manual switching allows you to switch the devices to telephone mode when needed. Ask your hearing professional which program you should access for manual telephone use. General Telephone Use Some hearing instruments work best by holding the phone close to, but not fully covering your ear. In some instances, if you encounter whistling (feedback), tilt the receiver at an angle until the whistling stops.
Operation Direct Audio Input (DAI) My hearing system is set up for DAI use. y hearing system is not set up for DAI use. M See page 24. Your hearing system has full direct audio input (DAI) capability. This allows you to connect your hearing system to an electronic sound source such as a wireless FM system, computer audio or an MP3 player. DAI can improve communication and sound quality when reverberation, distance and background noise compete with what you want to hear.
Accessories Hearing System Care Wireless Accessories* Instrument Care There are several wireless accessories that allow you to control and maximize the full potential of your hearing system. These include a remote control as well as wireless connection to your cell phone and entertainment system. Consult with your hearing professional to determine if your hearing aids have wireless capabilities and which accessories may be best for you. Do your best to keep your hearing instrument clean at all times.
Hearing System Care Helpful Hints • When not wearing your hearing system, open the battery door to allow any moisture to evaporate.
Tips for Better Communication Your hearing care professional will recommend an appropriate schedule to help you adapt to your new hearing system. It will take practice, time and patience for your brain to adapt to the new sounds that your hearing system provides. Hearing is only part of how we share thoughts, ideas and feelings. Reading lips, facial expressions and gestures can help the learning process and add to what amplification alone may miss.
Safety Information Safety Information Intended Use: An air conduction hearing aid is a wearable sound-amplifying device that is intended to compensate for impaired hearing. Hearing aids are available in multiple gain/output levels appropriate to treat hearing losses ranging from mild to profound. Your hearing instruments are designed to comply with the most stringent Standards of International Electromagnetic Compatibility.
FDA Information Required Information The following additional information is provided in compliance with U.S. Food and Drug Administration (FDA) regulations: WARNING TO HEARING AID DISPENSERS.
Notes 36 Notes 37
Notes 38 Notes 39
© 2013 Starkey Hearing Technologies. All Rights Reserved. 85476-007 9/13 BKLT0331-02-EE-XX Rev.
