Owner Manual

USER GUIDE
START HERE
DOWNLOAD
THE
STARFISH
APP
System Requirements
Minimum iOS 9.3 or Android 4.4
• Dedicated 2.4GHz Wifi Network •
TECHNICAL SUPPORT
Share a Home Add Devices
Create a Home
Individual Bulb On/Off
Individual Bulb Setting
Dimming
Tunable White
Color Changing
Features
Advanced Settings
Automation
and Scenes
Create/Share
a Home
1
Create a Password then tap “Done”
4
The status menu will appear. Wait until it’s completed.
Tap on the "Schedule" button
Tap the “Create Group” option
Tap the Smart button on the bottom of the screen
and then the plus (+) button on the top right hand
corner to setup your rst Scene or Automation
Tap the Power Button to turn the device On or Off
Tap the device icon for additional device features
12
20
24
29
14
15
To rename the device, tap the “Pen” icon, enter the
new name and tap “Completed”. The device is now
ready to be controlled with the starsh App.
At device control panel, tap the Timer Button to
create a countdown timer. Select time and conrm
to start the timer.
Select a time for the event to occur
Tap "Repeat" to repeat on certain days of the week,
otherwise the event will only occur once. Select the
days that you would like the schedule to repeat.
Select if you would like the device to turn on or off.
Select the devices you want to group and then
tap “Conrm”
Select "Run Scene" to create a scene that can be
executed with the click of a button
Select "When weather changes", "Schedule" or
"When device status changes" to have your devices
run automatically based on the condition.
Select the devices or groups that you would like to
be controlled, and then select if you would like those
devices to Turn On or Off, and the color.
Tap "Next" and then review the Automation
or Scene. Click "Save" to activate your
Automation or Scene.
Enter the group name and click "Save"
13
22
26
21
25
30 31 32
Tap the "Me" button on the bottom of the screen,
and then tap "Home Management". Tap the "Create
a home" button to setup your home.
5
Tap the plus (+) button on the upper right hand corner
to add a device
From the Home Management screen, select the Home
that you would like to share.
Tap "Add Member" and select the way that you would
like to send the invitation
86
Fit your bulb in to the desired tting & switch on.
Your bulb should be ashing.
Slide the dimming bar left or right to set the
brightness level
Use the round slider to adjust color temperatures
from Warm to Cool
Slide the dimming bar left or right to set the
brightness level
Tap on any part of the color wheel to select your
desired color
Use the slide bars to adjust the brightness and
color saturation
10
16 17
18
Ensure you are on the same 2.4GHz Wi-Fi network
that you will be adding your devices to. Enter the
Wi-Fi password and tap "OK".
11
Make sure you are connected to a 2.4GHz WiFi
Network then manually add smart lighting devices
Enter the user information and select if the new member
will be an "Administrator" or a "Common Member" in
the Home. Tap "Save" to send the invitation
9
7
Launch the App and tap “Register” for new accounts
or “Login” for existing accounts.
Enter E-Mail address, then tap “Get verication code”.
2
3
Note; If the devices are not ashing, turn devices On
and Off 5 times to enter pairing mode.
Note: If unsuccessful, please refer to the FAQs
Note: Screen shown for "dimming only" product.
NOTE: To create groups you will need at least
2 devices.
Effects Schedule
Timer
Create Groups
Tap on a preset effect or create a custom effect by
tapping on the edit button
Additional settings are available in the device
settings menu.
Tap the pen icon in the upper right corner to access
the menu screen
19
23
Tap the pen icon in the upper right corner
27
Rename the group or remove a device from the
group. Once complete, tap “Conrm” in the upper
right corner.
28
Edit Groups
johnsmith
[e-mail]