Intelligent display automatic sterilizer Product Model:TE-DS-215 (WAD) 第 1 页 共 8 页
1.Product Dimensions Picture 3.
2.Display parameters size 21.5 inch TFTLCD Effective display area 476.64(H)×268.11(V) mm screen ratio 16:9 Resolution 1920(RGB)×1080 brightness 280 cd/m² Contrast 4000:1 View Angle 89/89/89/89(TyP.)(CRX≥10） Response time 6ms Touch Optional PCAP touch 3.Hardware Configuration CPU Android quad core Main frequency1.3GHz.
.Disinfection machine configuration Product capacity 1000-1200ml Discharge mode Spray, foam，Dripping soap Ultraviolet Ultraviolet disinfection 3.5 Electronic data Input voltage AC100-240V 50/60HZ Sensor voltage AC 6V Rating power 20W 6.Packing List equipment 21.5 inch Intelligent display automatic sterilizer Packaging materials Carton,Pearl cotton，PE bag Accessories WIFI antenna, key * 2 7. Packing information N.W. (with stand) 34.5KG G.W. 39.
8. Caution 1. Make sure that the socket used is well grounded and connected to the power source away from high-power equipment. 2. Keep the power supply stable, and do grounding protection to avoid lightning strikes. 3. Do not squeeze the touch area of the whole machine shell or cabinet shell 4. Non-professionals are forbidden to touch the internal circuit of the whole machine to avoid electric shock or damage to the circuit. 5.
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver.
10.2 WIFI network connection: Click the settings icon to enter the settings option, click the "WLAN" option to open the right button, select the WIFI, to connect to enter the corresponding password to connect to use. 10.3. Ethernet connection: Plug the Ethernet cable into the RJ45 port on the device, click on the "more" option in the setting to enter the setting Ethernet mode, and automatically connect to the external network after opening the Ethernet. 10.
10.
