SA-5 The Official Mixer of The Allies All-star Beatdown OWNER’S M A N U A L STANTON MAGNETICS, INC info@stantonmagnetics.com www.STANTONDJ.com © 2003, Stanton Magnetics, Inc.
WELCOME! WA R R A N T Y Thank you for making Stanton your first choice in professional DJ mixers. This innovative mixer has been developed with input from the professional DJ community, bringing to the marketplace a previously unavailable, affordable combination of user-friendly, functional design, rugged construction, and professional quality features. This unit has been designed and manufactured using quality components.
S A - 5 F E AT U R E S T E C H N I C A L S P E C I F I C AT I O N S Line input: 2 (RCA) x 2 channels, -10 dBV / 10 kOhm Session Input: 2 (RCA), -10 dBV / 10 kOhm Phono input: 2 (RCA) x 2 channels, -50 dBV / 47 kOhm Mic input: 1(1/4") -50 dBV / 2.4 kOhm balanced Master output: 2 (1/4”) Balanced / 2 (RCA) unbalanced, The SA-5 “The Official Mixer Of The Allies All-Star Beatdown” Introducing the world’s first all fader battle mixer.
DESCRIPTION OF FUNCTIONS 2 3 FADER CLEANING AND REPLACEMENT 5. 4 6. Examine the center channel of the fader body (found inside the bottom of the fader casing) and if dirty, clean using cotton buds. Re-assemble and lubricate the fader as follows: a) Secure the end block and guide rail onto the fader body. b) Insert track into the fader body. 1 c) Insert slider assembly onto guide rail and into the fader body. Move 6 slider from end to end to disperse the oil evenly.
FADER CLEANING AND REPLACEMENT After constant scratching, the SA-5 faders may need to be cleaned and lubricated from time to time. This will ensure long life and keep a smooth feeling throughout the fader's lifetime. Follow the instructions below to lubricate and clean your faders: MIXER FUNCTIONS 6. Crossfader Reverse: Reverses the direction of the crossfader. When switched down, channel 1 will be assigned to the right side of the crossfader, and channel 2 to the left side. 7.
BACK P ANEL B A C K PA N E L 28. Headphone output: Standard 1/4” headphone output connector. 22 23 25 26 25 26 27 20 28 29 19 29. Session/Mic switch: Used to assign the Session/Mic fader to either the Session input or the MIC input. 30. Microphone input: 1/4” connector for connecting a microphone. 31. Phono Inputs: Phono level inputs for channels 1 and 2. Do not plug line outputs into phono inputs. 32. Line inputs: Line level inputs for channels 1 and 2.