Manual

ManualsBrandsStack-On ManualsFurnitureGC-500-5 4472-0707

4472-0707

Home Security Cabinet

Installation Instructions

Key #:

Serial #:

MODEL GC-910-5

INSTALLATION OF BARREL RESTS AND SHELF

Installation of Barrel Rests

Measure and mark the locations of the barrel rests on the innner sides of the cabinet using the

dimension shown. (See figure 1)

To install the barrel rests to the cabinet, first remove the backing from the foam rests. For help in

doing this, pinch the end of the foam to help secure the adhesive to the foam.

Attach the barrel rests to the inner sides of the cabinet as shown.

Shelf Assembly

Assemble the shelf inside the cabinet with (4) 10-32 nuts and bolts as shown. (See figure 1)

Place the bottom pad (A) in the bottom of the cabinet.

36"

CABINET MOUNTING INSTRUCTIONS

Selecting a Location

Your Security Cabinet should be installed in an isolated, dry and secure area.

For greater security the cabinet must be fastened to a solid surface with a minimum space on either side.

Ideally the cabinet would be installed on the side wall of a closet. (See figure 2)

The cabinet should be flat against the wall and floor. Remove the baseboard if necessary. (See figure 3)

Insert the plastic plugs in the cabinet's top mounting holes if you are not installing the Pistol-Ammo cabinet

on the top of the security cabinet.

Wall Mount Option

The (4) mounting holes in the rear of the cabinet must line up with the 16" centers of the wall studs. Drill

new holes in the cabinet if necessary. (See figure 3)

Drill (4) 3/16" pilot holes into the wall studs and secure the cabinet to the wall using (4 ea.) lag bolts and

washers. (See figure 3)

Floor Mount Option

The (4) mounting holes in the rear of the cabinet must line up with the 16" centers of the wall studs. Drill

new holes if necessary. (See figure 3)

Drill (2) 3/16" pilot holes into the wall studs lining up with the top (2) mounting holes in the back of the

cabinet. Secure the cabinet to the wall using (2) lag bolts and washers.

Drill (2) pilot holes and secure the cabinet bottom to the floor with (2) lag bolts and washers.

16"

CENTERS

CABINET

TOP VIEW

MINIMUM

IMPORTANT:

Record the serial and key numbers from the back of the

cabinet. You will need the serial number information in

order to replace lost keys.

Do not store this document in your security cabinet.

Keep keys in a secure place away from children.

NOTE: Assemble shelves before mounting the cabinet

to a wall or floor. Exterior access is required for

assembly. Review these instructions prior to installation.

7/16" wrench

Phillips screwdriver

Drill with

3/16" bit

Tools Required:

Summary of content (12 pages)

PAGE 1
Key #: ® R Home Security Cabinet Installation Instructions IMPORTANT: Tools Required: Record the serial and key numbers from the back of the cabinet. You will need the serial number information in order to replace lost keys. Phillips screwdriver Serial #: Do not store this document in your security cabinet. Keep keys in a secure place away from children. 7/16" wrench NOTE: Assemble shelves before mounting the cabinet to a wall or floor. Exterior access is required for assembly.
PAGE 2
MODEL GC-500-5 PISTOL-AMMO CABINET ASSEMBLY IMPORTANT: Install the shelf before mounting the cabinet to a wall. Install shelf with (4) 10-32 nuts and bolts. (See figure 4) Place foam pad in bottom of cabinet. Insert the plastic plugs in the cabinet's top mounting holes. 4 INSTALLATION OF GC-500-5 PISTOL-AMMO CABINET ON TOP OF SECURITY CABINET NOTE: We recommend that security cabinet be installed as described above. IMPORTANT: Install the shelf before mounting the cabinet to a wall.
PAGE 3
R R Security Cabinets and Safes Key or Combination Request “This is not a Registration Form” Verification of ownership is required in order to receive replacement key or confirm your combination on your security product. In order to receive a replacement key or obtain the combination to your security product: 1. Complete the following form and send to Stack-On Products. 2. Send a copy of your valid driver’s license along with the form. 3. Send a copy of the receipt showing the original purchase. 4.
PAGE 4
R R LIMITED ONE YEAR WARRANTY SECURITY PLUS STEEL CABINETS AND PISTOL BOXES Stack-On Products Co. (“Stack-On”) Security Plus Steel Cabinets and Pistol Boxes, are warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase by a consumer. This warranty extends to the initial consumer only.
PAGE 5
® R Armoire de sécurité pour la maison Directives d'installation IMPORTANT: Notez le numéro de série et le numéro des clefs de l'étiquette derrière l'armoire. Vous aurez besoin du numéro de série pour obtenir un remplacement de clef. No de clef : No de série : Outils requis: Tournevis Phillips Ne conservez pas ce document dans votre armoire de sécurité. Gardez les clefs en lieu sûr et hors de portée des enfants.
PAGE 6
MODÈLE GC-500-5 INSTALLATION DE L'ARMOIRE À MUNITIONS ET PISTOLETS IMPORTANT: Installez la tablette avant de fixer l'armoire au mur. Installez la tablette à l'aide de 4 boulons et écrous de 10/32. (Figure 4) Installez le revêtement en mousse au fond de l'armoire. Insérez les bouchons de plastique dans les trous de fixation supérieurs de l'armoire.
PAGE 7
R R Demande de clés pour les armoires de sécurité et les coffres-forts ou demande de combinaison " Ceci n'est pas un formulaire d'inscription " Il faut procéder à une vérification du contrôle de possession avant de vous envoyer une clé de remplacement ou de confirmer la combinaison de votre armoire de sécurité. Pour recevoir une clé de remplacement ou obtenir la combinaison de votre armoire de sécurité : 1. Remplissez le formulaire qui suit et faites-le parvenir à Stack-On Products. 2.
PAGE 8
R R GARANTIE RESTREINTE D’UN AN ARMOIRES D’ACIER ET BOÎTES À PISTOLETS SECURITY PLUS Les armoires d’acier et boîtes à pistolets de Stack-On Products Co. (« Stack-On ») sont garanties exemptes de défauts de matériel ou de fabrication pour une période d’un (1) an à partir de la date de l’achat original par un consommateur. Cette garantie ne touche que le premier acheteur.
PAGE 9
® R Instrucciones de Instalación Caja Fuerte para el Hogar IMPORTANTE: Registre el número de serie y de llave ubicado en la parte de atrás de la caja de la unidad. Necesitará el número de serie para solicitar un reemplazo de llaves. Key #: Serial #: Herramientas Necesarias: Desarmador "Phillips" No guarde este documento dentro de la caja fuerte. Conserve las llaves en un lugar seguro fuera del alcance de los niños.
PAGE 10
MODELO GC-500-5 ENSAMBLADO DEL GABINETE PARA PISTOLAS Y MUNICIONES IMPORTANTE: Instale la repisa antes de montar el gabinete a la pared. Instale la repisa con 4 tuercas y tornillos (10-32). (véase la figura 4) Coloque el cojín de hule espuma sobre el fondo del gabinete. Inserte los pernos de plástico dentro de los hoyos que se encuentran en la parte superior del gabinete.
PAGE 11
R R Solicitud de Llave o de Combinación para Gabinetes de Seguridad y Cajas Fuertes "Este no es un Formato de Registro" Requerimos verificación del propietario para procesar esta solicitud de llave o para confirmar la combinación de su gabinete de seguridad. Para poder recibir su llave de reemplazo o para obtener la combinación de su gabinete de seguridad: 1. Llene y envíe esta solicitud a Stack-On Products. 2. Envíe copia de su licencia de conducir junto con la solicitud. 3.
PAGE 12
R R GARANTÍA LIMITADA DE UN AÑO GABINETES DE ACERO Y CAJAS DE PISTOLAS Los Gabinetes de Acero y Cajas de Pistolas de Stack-On Products Co. (“Stack-On”) están garantizados como libres de defectos de materiales y hechura durante un período de un (1) año a partir de la fecha de compra original de un consumidor. Esta garantía se aplica al consumidor inicial solamente.