Allegro Wall Mount Installation Guide Category: Residential and Commercial Metering Type: Installation Manual Issue: Operation
1. Introduction The Allegro Wall mount endpoint for wáter meters provides two-way communication capabilitiblites over the Allegro RF Network to transmit encoded wáter meter readings, alarms, and other related functions. The Allegro Wall mount endpoint is battery operated and utilizes an FCC licensed frequency within the 450- 470Mhz band.
4. Regulation Information FCC and Industry Canada Class B Digital Device Notice The digital circuit of this device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
5.
6. Installation Requirements Step 1) Remove the Meter Pit Lid Step 2) Remove threaded locking mechanism Step 3) Pass the cable through the Lid hole and install the Allegro Wall mount endpoint into the Pit lid. If mounting brackets are available beneath the meter pit lid, the endpoint may alternatively be installed in this manner.