Smart Ring ORIGINALITY DESIGN SMART - AND BEAUTIFUL QUICK GUIDE
Functions 功能介绍 Remote wake-up The doorbell will be in a sleep mode to save power; you can have a preview in App and have a remote wake-up to monitor after 3-4 Seconds. Full-duplex audio When the visitor push the doorbell button, you will get a call. You can see and hear the vistor in your App from the doorbell if you answer. PIR When the doorbell detects someone stopping by, it sends an alarm message to your cell phone. Low battery alarm You can set a low-battery alarm threshold on your phone App.
What's in the box Consult the checklist below for all components.
Microphone Status light Speaker Doorbell button SD card slot Reset 1 External power port Back of doorbell Description Power Port DC 5V±10%,use the screws to fix the power converter Doorbell button Press the button to activate the doorbell Status light Red light solids on: the camera network is abnormal Red light blinking: awaiting WiFi connection, or currently connecting (faster blinking) Blue light solids on: camera running correctly Microphone Captures sound for your video SD card slot Suppo
Reset 2 Charging indicator Mini USB Bayonet lock Description Mini USB DC5V±10%,USB power supply Charging indicator Red indicator solids on: battery is charging Blue indicator solids on: finishing charging Reset 2 Tap reset button for 5 seconds to factory reset (it will not unbind the device) Bayonet lock Lock the battery box through bayonet lock Battery capacity 6000mAh (Two 18650 lithium-ion batteries) 4
Connect Download Smart Life is available for both iOS and Android OS. Rearch the name 'Smart Life'in App Store or Android Market, or scan the QR-Code to download the App. ·Support IOS Android Dowoload App(IOS&android) Set up router This device only supports 2.4GHz frequency band router, does not support 5GHz frequency band router, please set the relevant parameters of the router before WiFi configuration, WiFi passwords do not include special characters such as ~!@#$%^&*().
Registration process Step 1 Open the Smart Life App, click "Register", read the "Privacy Policy" and click "Agree" . Step 2 input a legal and valid Mobile number or Email address and click "Continue". Input Verification Code, then log in the app.
QR Code Configuration Getting started 1. Please follow the instructions and make sure the password is inputed correctly. 2. One device can only be added with one App account, if the device has been added with another account already, then it can't be added to any another account again. 3.The device will be unbind from previous account after been deleted from App. Further ,the device will be resetted automattically once from blue light to red light.
Step 3 Input WiFi password and click "Confirm", scan the QR Code with a device.
Step 4 Click "I heard the beep" when the device comes out "dong dong dong". And you can complete the configuration about 30s. Step 5 The device is added, and the device nickname can also be changed in this interface. Notice:After the device configured successfully, it will be automatically locked.Motor in the battery box will make a sound.Click "Click to Unlock the Battery"first before unplug the battery.
FAQ Q: In the network process, the process bar is always not 100%, add failure? A: This camera only supports 2.4GHz WiFi router, please make sure you are using a 2.4GHz WiFi router.And confirm the WiFi password again. Q: Repeated additions are failures? A: After adding a failure, it is recommended to restart the device or power off, and then try to add again.
Unlock Step 1 Click "...", enter the "Setting" page and click "Basic Feature Settings". Step 2 Enter the "Basic Feature Settings" setting page and click "Unlock the Battery" to unlock it automatically. When the motor is finished, the battery box can be pulled out.
Install 安装 Warning:Don’t fall down during using Installation of Power supply mode Mylar 8~24 V AC outputcable inputcable Red lead Black lead Step 1 Each input-cable (AC 8~24V) connect to the wires which come out of the wall. Step 2 Remove the bottom cover and bracket of the doorbell host and lead the output terminal.Connect to the power interface on the back of the doorbell host.Note: red lead connects the power "+", black connects the power "-".
Step 5 Screw 4 expansion screws into the newly marked position. Step 7 Install the bottom door of the doorbell main unit and fix it with screws. 14 Step 6 Fix the mounting bracket to the wall. Step 8 Pull the power cable from the center hole of the bracket and slowly insert the doorbell into the door as shown in the above figure (be careful not to catch your finger).
Install the device in battery-powered mode Step 1 Remove the doorbell bottom cover and bracket as shown in the figure Step 2 Use the marker to draw 4 screw holes on the surface of the wall to be installed Step 3 Screw 4 expansion screws into the newly marked position 15 Step 4 Fix the mounting bracket to the wall
Step 5 Snap the doorbell into the bracket Step 6 Align the battery box with the bayonet lock, and push the battery box into doorbell.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.