IP Camera Quick User Manual Shenzhen Sricctv Technology Co.,Ltd Add: The 4th Floor of building46, 5th Industrial Park of Huaide Cuigang,Fuyong Street, Bao’an, Shenzhen, China. Customer Service Skype ID: tech.sricam Model: SH020 Website: www.sricam.com E-Mail: support@sricam.
Products Introduction IR Sensor Lens TF Card Slot (15*11*1mm) Antenna Reset LAN Port Power Jack Before starting setup Make sure of the followings: • Mount the antenna and make it vertical. • IP camera doesn’t support 5GHZ Wi-Fi. • The router has enabled DHCP to obtain IP address automatically.
Step1. Product Connection 3 Reset Router WAN LAN 1 Step1-1: Connect the camera to LAN (Router or Switch) via network cable. Step1-2: Power on the camera with power adaptor. Step1-3: Reset the camera.(Keep pressing the RESET button for 8 seconds then release.) Note: If no LAN port on your router, you can connect the camera to Wi-Fi via AP Hotspot. Details please reference to FAQ7. Step2. SriHome App Installation Method 1: Search“SriHome”on Google Play or iOS App Store.
Step4. Add the Camera to App Device Add Add Input device name to search device WiFi QR Connect 2 Scan ? 1 Input the device’s ID A00******* Please name the device Input password (Default:888888) 888888 4-1 You can scan the QR code or input the camera ID manually 3 IP Camera Power: **V IPCam No device list, please add one! Next 4-2 ID: A0*********** Password: 888888 RoHS The label is attached on the camera Step5.
Network Settings Save Network Settings Network Settings Save Save Network Config Note: Please confirm whether connect your device to the current WiFi Setup WiFi PaladinTek-2.
Share camera to other users To protect user’s privacy, the first user is an administrator by default. Other users accessing the camera need the administrator's authorization, or they fail to access the camera with its ID and password. The way to get permission is as follows: Log in “SriHome” App, tap Settings -> Visitors Management -> Add. There are 2 types of permissons: Operator: Watch live video, set time, alarm, records & network.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
