Blips and BlipBox TM Blips/BlipBoxTM User Manual Blips/BlipBoxTM Bedienungsanleitung Manuel d’entretien Blips/BlipBoxTM Manuale dell'Utente Blip/BlipBoxTM Manual de usuario Blips/BlipBoxTM Blips/BlipBoxTM Gebruiksaanwijzing Manual do Utilizador do Blips/BlipBoxTM Blips/BlipBoxTM ユーザー ・ マニュアル Blips/BlipBoxTM 用户手册 95-XXXX-XXX-XXX Rev X © 2015 SRAM, LLC
Tools and Supplies Tools and Supplies Tools and Supplies Tools and Supplies Tools and Supplies Tools and Supplies Tools and Supplies Tools and Supplies Tools and Supplies Highly specialized tools and supplies Highly specialized tools and supplies Highly specialized tools and supplies are required for the installation are required for the installation are required for the installation of your SRAM components. We of your SRAM components. We of your SRAM components.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS You must read and understand You must read and understand You must read and understand the safety and warranty document the safety and warranty document the safety and warranty document before proceeding with installation. before proceeding with installation. before proceeding with installation.
Product Registration Product Registration Product Registration Product Registration Product Registration Product Registration Product Registration Product Registration Product Registration For software updates and information For software updates and information For software updates and information related to your products, please related to your products, please related to your products, please register online at www.sram.com/ register online at www.sram.com/ register online at www.sram.
BlipBoxTM BlipBoxTM BlipBoxTM BlipBoxTM BlipBoxTM BlipBoxTM BlipBoxTM BlipBoxTM BlipBoxTM The BlipBox wirelessly pairs to each The BlipBox wirelessly pairs to each The BlipBox wirelessly pairs to each derailleur, sends shift signals to the derailleur, sends shift signals to the derailleur, sends shift signals to the front and rear derailleurs when the front and rear derailleurs when the front and rear derailleurs when the Blips are pressed, and shifts the Blips are pressed, and shifts the Blip
a d b c e f g (a) LED (a) LED (a) LED (b) Rear derailleur inboard shift (b) Rear derailleur inboard shift (b) Rear derailleur inboard shift (c) Rear derailleur outboard shift (c) Rear derailleur outboard shift (c) Rear derailleur outboard shift (d) Front derailleur shift (d) Front derailleur shift (d) Front derailleur shift (e) Pairs BlipBox to each derailleur (e) Pairs BlipBox to each derailleur (e) Pairs BlipBox to each derailleur (f) Wire input, left Blips (f) Wire input, left Blip
1 Remove the dummy plugs from Remove the dummy plugs from Remove the dummy plugs from the BlipBox. the BlipBox. the BlipBox. NOTICE NOTICE NOTICE Do not discard the dummy plugs. Do not discard the dummy plugs. Do not discard the dummy plugs. Reinstall if Blip connector wire Reinstall if Blip connector wire Reinstall if Blip connector wire is removed. is removed. is removed.
BlipBox Mounts BlipBox Mounts BlipBox Mounts BlipBox Mounts BlipBox Mounts BlipBox Mounts BlipBox Mounts BlipBox Mounts BlipBox Mounts Bar Extension Mount Bar Extension Mount Bar Extension Mount Bar Extension Mount Bar Extension Mount Bar Extension Mount Bar Extension Mount Bar Extension Mount Bar Extension Mount 1 2 T25 1 N·m (8.8 in-lb) Install the BlipBox Install the BlipBox Install the BlipBox onto the mount. onto the mount. onto the mount.
Stem Mounts Stem Mounts Stem Mounts Stem Mounts Stem Mounts Stem Mounts Stem Mounts Stem Mounts Stem Mounts Flat Mount Flat Mount Flat Mount Flat Mount Flat Mount Flat Mount Flat Mount Flat Mount Flat Mount Curved Mount Curved Mount Curved Mount Curved Mount Curved Mount Curved Mount Curved Mount Curved Mount Curved Mount Rubber Band Mount Rubber Band Mount Rubber Band Mount Rubber Band Mount Rubber Band Mount Rubber Band Mount Rubber Band Mount Rubber Band Mount Rubber Band Mou
Adhesive Adhesive Adhesive Adhesive Adhesive Adhesive Adhesive Adhesive Adhesive 1 2 Attach the adhesive tab to the back Attach the adhesive tab to the back Attach the adhesive tab to the back of the flat or curved puck mount and of the flat or curved puck mount and of the flat or curved puck mount and remove the paper backing. remove the paper backing. remove the paper backing.
Rubber Band Rubber Band Rubber Band Rubber Band Rubber Band Rubber Band Rubber Band Rubber Band Rubber Band 1 Position the mount onto the stem in Position the mount onto the stem in Position the mount onto the stem in the desired location. the desired location. the desired location. Position the mount onto the stem in Position the mount onto the stem in Position the mount onto the stem in the desired location. the desired location. the desired location.
1 Install the BlipBox onto the mount. Install the BlipBox onto the mount. Install the BlipBox onto the mount. Install the BlipBox onto the mount. Install the BlipBox onto the mount. Install the BlipBox onto the mount. Install the BlipBox onto the mount. Install the BlipBox onto the mount. Install the BlipBox onto the mount. 3 2 Twist the BlipBox one quarter turn to Twist the BlipBox one quarter turn to Twist the BlipBox one quarter turn to lock into place. lock into place. lock into place.
Blips Blips Blips Blips Blips Blips Blips Blips Blips Each Blip satellite shifter actuates a Each Blip satellite shifter actuates a Each Blip satellite shifter actuates a derailleur shift, inboard or outboard, derailleur shift, inboard or outboard, derailleur shift, inboard or outboard, when the button is pressed. Each when the button is pressed. Each when the button is pressed.
Installation Installation Installation Installation Installation Installation NOTICE Installation Installation Installation NOTICE NOTICE Measure the length of wire required Measure the length of wire required Measure the length of wire required and select the appropriate Blip wire and select the appropriate Blip wire and select the appropriate Blip wire length before installing the Blip. length before installing the Blip. length before installing the Blip.
Bar Extension Bar Extension Bar Extension Bar Extension Bar Extension Bar Extension Bar Extension Bar Extension Bar Extension 1 2 Clean the bar extension with Clean the bar extension with Clean the bar extension with isopropyl alcohol. isopropyl alcohol. isopropyl alcohol. Attach the Blip to the bar with the Attach the Blip to the bar with the Attach the Blip to the bar with the adhesive tab in the desired adhesive tab in the desired adhesive tab in the desired ergonomic position.
Blip Grip Blip Grip Blip Grip Blip Grip Blip Grip Blip Grip Blip Grip Blip Grip Blip Grip 1 2 Install each BlipGrip onto each Install each BlipGrip onto each Install each BlipGrip onto each bar extension. bar extension. bar extension. Install each BlipGrip onto each Install each BlipGrip onto each Install each BlipGrip onto each bar extension. bar extension. bar extension. Install each BlipGrip onto each Install each BlipGrip onto each Install each BlipGrip onto each bar extension.
2 Rotate and adjust each BlipGrip to the Rotate and adjust each BlipGrip to the Rotate and adjust each BlipGrip to the desired ergonomic position. desired ergonomic position. desired ergonomic position. Rotate and adjust each BlipGrip to the Rotate and adjust each BlipGrip to the Rotate and adjust each BlipGrip to the desired ergonomic position. desired ergonomic position. desired ergonomic position.
Blip Wire Blip Wire Blip Wire Blip Wire Blip Wire Blip Wire Blip Wire Blip Wire Blip Wire 100 mm NOTICE NOTICE NOTICE At least one Blip wire must have a At least one Blip wire must have a At least one Blip wire must have a minimum of 100 mm of uninterupted minimum of 100 mm of uninterupted minimum of 100 mm of uninterupted exposed wire for proper signal exposed wire for proper signal exposed wire for proper signal transmission. Routing wires under transmission.
1a 1b 1a 1b Route each Blip wire from the end of Route each Blip wire from the end of Route each Blip wire from the end of the bar extension, internally (1a) or the bar extension, internally (1a) or the bar extension, internally (1a) or externally (1b), to the BlipBox. Plug externally (1b), to the BlipBox. Plug externally (1b), to the BlipBox. Plug each connector into the BlipBox; each connector into the BlipBox; each connector into the BlipBox; left left left , right . , right .
Aero Bar Aero Bar Aero Bar Aero Bar Aero Bar Aero Bar Aero Bar Aero Bar Aero Bar 1 1 2 Clean the handlebar with isopropyl Clean the handlebar with isopropyl Clean the handlebar with isopropyl alcohol. alcohol. alcohol. Attach the Blip to the handlebar Attach the Blip to the handlebar Attach the Blip to the handlebar with the adhesive tab in the desired with the adhesive tab in the desired with the adhesive tab in the desired ergonomic position. ergonomic position. ergonomic position.
1a 1b Route each Blip wire, internally (1a) or Route each Blip wire, internally (1a) or Route each Blip wire, internally (1a) or externally (1b), on the handlebar and externally (1b), on the handlebar and externally (1b), on the handlebar and plug the connector into the BlipBox; plug the connector into the BlipBox; plug the connector into the BlipBox; left (-), right (+). left (-), right (+). left (-), right (+).
Drop Bar Drop Bar Drop Bar Drop Bar Drop Bar Drop Bar Drop Bar Drop Bar Drop Bar Option 1 Option 1 Option 1 Option 1 Option 1 Option 1 Option 1 Option 1 Option 1 1 2 Clean the handlebar surface with Clean the handlebar surface with Clean the handlebar surface with isopropyl alcohol. isopropyl alcohol. isopropyl alcohol.
Option 2 Option 2 Option 2 Option 2 Option 2 Option 2 Option 2 Option 2 Option 2 1 4 2.5 0.23 N·m (2.0 in-lb) 3 2 Insert the Blip into the clamp. Attach Insert the Blip into the clamp. Attach Insert the Blip into the clamp. Attach the clamp to the handlebar and rotate the clamp to the handlebar and rotate the clamp to the handlebar and rotate to the desired position. Tighten the to the desired position. Tighten the to the desired position. Tighten the clamp bolt. clamp bolt. clamp bolt.
Shifter Shifter Shifter Shifter Shifter Shifter 1 2 Shifter Shifter Shifter Fold the hood cover Fold the hood cover Fold the hood cover back and remove the back and remove the back and remove the dummy plug. dummy plug. dummy plug. Fold the hood cover Fold the hood cover Fold the hood cover back and remove the back and remove the back and remove the dummy plug. dummy plug. dummy plug.
1 Refer to pages 16-18 for bar extension Refer to pages 16-18 for bar extension Refer to pages 16-18 for bar extension Blip installation. Blip installation. Blip installation. Route the Blip wire from the bar Route the Blip wire from the bar Route the Blip wire from the bar extension under the drop handlebar extension under the drop handlebar extension under the drop handlebar and plug it into the eTap shifter input 2. and plug it into the shifter input 2.
Pairing Pairing Pairing Pairing Pairing Pairing 1 2 Pairing Pairing Pairing 3 Begin the pairing session at the rear Begin the pairing session at the rear Begin the pairing session at the rear derailleur. Press and hold the function derailleur. Press and hold the function derailleur. Press and hold the function button on the rear derailleur until the button on the rear derailleur until the button on the rear derailleur until the green LED blinks slowly, then release.
4 To end the pairing session, press and To end the pairing session, press and To end the pairing session, press and release the function button on the rear release the function button on the rear release the function button on the rear derailleur. Verify the system is paired derailleur. Verify the system is paired derailleur. Verify the system is paired by shifting the derailleurs in both by shifting the derailleurs in both by shifting the derailleurs in both directions. directions.
Shifting Shifting Shifting Shifting Shifting Shifting Shifting Shifting Shifting Rear Derailleur Rear Derailleur Rear Derailleur Rear Derailleur Rear Derailleur Rear Derailleur Rear Derailleur Rear Derailleur Rear Derailleur Press the left blip or the on the Press the left blip or the on the Press the left blip or the on the BlipBox to move the rear derailleur BlipBox to move the rear derailleur BlipBox to move the rear derailleur inboard. Press and hold for multiple inboard.
Press the right blip or the on the Press the right blip or the on the Press the right blip or the on the BlipBox to move the rear derailleur BlipBox to move the rear derailleur BlipBox to move the rear derailleur outboard. Press and hold for outboard. Press and hold for outboard. Press and hold for multiple shifts. multiple shifts. multiple shifts.
0.25mm Rear derailleur micro adjustment can Rear derailleur micro adjustment can Rear derailleur micro adjustment can eliminate unwanted chain rub or noise. eliminate unwanted chain rub or noise. eliminate unwanted chain rub or noise.
0.25mm To micro adjust outboard, press and To micro adjust outboard, press and To micro adjust outboard, press and hold the FUNCTION button, then press hold the FUNCTION button, then press hold the FUNCTION button, then press the right blip or the right blip or the right blip or button. Repeat until button. Repeat until button. Repeat until the adjustment is complete. the adjustment is complete. the adjustment is complete.
Front Derailleur Front Derailleur Front Derailleur Front Derailleur Front Derailleur Front Derailleur Front Derailleur Front Derailleur Front Derailleur Press both Blips simultaneously, or Press both Blips simultaneously, or Press both Blips simultaneously, or press press press FD on the Blip Box, to move the FD on the Blip Box, to move the FD on the Blip Box, to move the front derailleur inboard or outboard. front derailleur inboard or outboard. front derailleur inboard or outboard.
Battery Battery Battery Battery Battery Battery Battery Battery Battery 12-3 meses 12-3 months 24 à 6 mois 12-3 Monate 12-3 mesi 12-3 meses 12-3 maanden 12-3 月 12~3 か月 3-1 months 6 à 1 mois 3-1 meses 3-1 Monate 3-1 mesi 3-1 mes 3-1 maanden < 1 month < 1 mois < 1 Monat < 1 mese < 1 mes < 1 maand 3~1 か月 3-1 月 < 1 mês < 1 か月 <1月 The LED lights up when a shift is Les LED s’allument à chaque fois que O LED acende quando se mete uma performed.
Replacement Replacement Replacement Replacement Replacement Replacement Replacement Replacement Replacement Use a coin to remove the Use a coin to remove the Use a coin to remove the battery cap. Remove the battery cap. Remove the battery cap. Remove the old battery. old battery. old battery. NOTICE 1 NOTICE Do not remove the Do not remove the battery cap o-ring seal. battery cap o-ring seal. battery cap o-ring seal.
4 5 Reinstall the battery cap. Reinstall the battery cap. Reinstall the battery cap. Use a coin and turn the Use a coin and turn the Use a coin and turn the cap clockwise to lock it cap clockwise to lock it cap clockwise to lock it into place. into place. into place. Reinstall the battery cap. Reinstall the battery cap. Reinstall the battery cap.
Maintenance Maintenance Maintenance Maintenance Maintenance Maintenance Maintenance Maintenance Maintenance Periodic cleaning is recommended. Periodic cleaning is recommended. Periodic cleaning is recommended. Use a damp cloth to wipe the Use a damp cloth to wipe the Use a damp cloth to wipe the components until clean. components until clean. components until clean. Periodically inspect each Blip Periodically inspect each Blip Periodically inspect each Blip connector wire for damage.
WARNING WARNING WARNING Do not use or clean the BlipBox or Do not use or clean the BlipBox or Do not use or clean the BlipBox or eTap™ shifters without connector wires eTap™ shifters without connector wires eTap™ shifters without connector wires or dummy plugs installed. Moisture will or dummy plugs installed. Moisture will or dummy plugs installed. Moisture will damage the electronics. damage the electronics. damage the electronics.
Recycling Recycling Recycling Recycling Recycling Recycling Recycling Recycling Recycling For consumers in the United States For consumers in the United States For consumers in the United States and Canada, SRAM has partnered and Canada, SRAM has partnered and Canada, SRAM has partnered with the Rechargeable Battery with the Rechargeable Battery with the Rechargeable Battery Recycling Corporation. Please call Recycling Corporation. Please call Recycling Corporation.
Compliance Compliance Compliance Compliance Compliance Compliance Compliance Compliance Compliance SRAM LLC certifies that this product and its packaging are in compliance with: R&TTE Directive, the Radio and Telecommunication Terminal Equipment Directive 1999/5/EC WEEE Directive, the Waste Electrical and Electronic Equipment Directive 2012/19/EU RoHS Directive, the restriction of the use of certain hazardous substances in electrical and electronic equipment 2002/95/ EC REACh Directive, the Regulation on
Specifications Specifications Specifications Specifications Specifications Specifications Specifications Specifications Specifications Rechargeable Lithium-ion Polymer Battery Model: 25401 Cell Type 300mAh/3.7V Pack Configuration 2S1P Nominal Voltage 7.4 DC EOD Voltage 6.0V DC Nominal Capacity 300mAh Minimum Capacity 290mAh (at 0.2C discharge rate 3.0v cut off after standard charge) Average Working Voltage 7.4V at 0.2C rate Fast Charge Constant current 1.0C Constant Voltage 8.
www.sram.com “We will revolutionize the relationship that our users have with SRAM products, cultivating a bond between the rider and bicycle. Our technical communication will be delivered in innovative and exciting ways, with deliberation and accuracy that inspires loyalty and trust across the globe.” -SRAM TechCom Vision Statement ASIAN HEADQUARTERS SRAM Taiwan No. 1598-8 Chung Shan Road Shen Kang Hsiang, Taichung City Taiwan R.O.C. WORLD HEADQUARTERS SRAM LLC 1000 W.