G1W-H: SpyTec User Manual Last Modified on 12/20/2015 11:25 pm EST G1W-H Dash Camera User Manual GETTING STARTED Components Features Powering Up the Device Micro SD Memory Card for Data Storage Attaching the Device to Tilting Suction Mount Menu Options Accessing Menu Items Video Menu Resolution Loop Recording Wide Dynamic Range (WDR) Exposure Motion Detection Record Audio G-Sensor Date Stamp
Video Settings Menu Set the Time and Date Auto Power Off Beep Sound Language TV Mode Frequency Screen Protection IR LED Format Default Setting Version Still Capture Menu Capture Mode Resolution Sequence Quality Sharpness White Balance Color ISO Exposure Anti-Shaking HDR Date Stamp Still Capture Settings Menu Set the Time and Date Adding License Number Set to Timestamp Auto Power Off Video Recording Taking Pictures Accessing, Adding and Deleting Files Specifications Precautions Frequently Asked Questions (FA
Components Camera with rechargeable battery USB cable Car charging unit Suction holder User Manual Features 1080P HD Video & Audio Recording Up to 64GB microSD Novatek NT96650 & Aptina AR0330 G-Sensor (allows camera to stabilize if jarred and prevents loop recording over footage taken during an accident) 2.
Micro SD Memory Card for Data Storage On the right-facing side of the G1W device, you will see a slot for the microSD card (not included). Place the microSD memory card (up to 64GB), text facing upwards, into the slot and push in until it clicks into place. To remove or replace the microSD memory card, simply push in until it clicks in/out of place. If the microSD card is unrecognized, a blue screen will appear with the message “PLEASE INSERT SD CARD.
G1W-H with mount Menu Options Press the M button on the top of the camera to access the Video menu and press the M button again to access the Settings menu. Use the Up and Down arrow buttons to the left of the screen for navigation of menu selections. Once you have found the desired menu option, press the REC button to the right of the screen to make a selection. To escape the menu screen, press the Mode button.
Video Menu To access the Video menus, if the device powers on and is not automatically in Video mode, press the Mode button to the right of the screen until you are in Video mode (shows a film strip icon to the top left of the screen) and then the Menu button. Press the Menu button twice for Setup. Resolution After selecting the Resolution option, navigate using the Up and Down buttons to the left of the screen.
Record Audio There are settings to enable or disable audio recording available from the menu by selecting the Record Audio option and navigating using the Up and Down buttons to choose either On or Off. In Off mode, only video is recorded and in On mode, both audio and video are recorded. Once the On or Off option is highlighted, press the Capture button to save the selection. G-Sensor The G-Sensor stabilizes the image in the event that a wreck or other physical disturbance occurs.
Language Select the Language icon from the menu to choose English, French, Spanish, Portuguese, German, Italian, Simplified Chinese, Traditional Chinese, Russian, or Japanese and pressing the Capture button to save settings. TV Mode Use the AV Out port to connect an HDMI cable to the camera for viewing images on a television monitor. Select the TV Mode icon from the settings menu and choose either NTSC (National Television System Committee) or PAL (Phase Alternate Line) depending on user preferences.
information. Still Capture Menu To access the Still Capture menus, press the Mode button to the right of the screen until you are in Camera mode (shows a camera icon to the top left of the screen) and then the Menu button on top of the camera and press the Menu button twice for Setup. Capture Mode After selecting the Capture Mode option, press the Capture button.
changes in lighting. In Daylight mode, settings will allow greater clarity for footage taken in daylight as with Cloudy settings for cloudy conditions. The Tungsten mode is best for basic indoor use, whereas the Flourescent setting adds brightness and warmth to the indoor image. Once the desired option is highlighted, press the Capture button to save the selection.
Set the Time and Date To set the time and date, use the Up and Down buttons to select the System Setup icon (last on the right) of the menu and press the Capture button. Here Time and Date are listed with an arrow pointing to changeable values. Use the Up and Down buttons to adjust the values. After you have found the correct value for the year, press the Capture button. Now, you can adjust the Date Format by pressing the Up and Down buttons. Press the Capture button after selecting the desired format.
It is also possible to view a Slide Show from the Playback menu by selecting the last menu option. Always use the Capture button to make menu selections after desired menu navigation. To escape the menu, press the MODE button. In the Playback screen, press the Menu button twice to access the Setup menu.
before use or storage. MicroSD card real capacity may be slightly less than the nominal value. If the capacity of the card is abnormal, reformat the card. Any previously stored data will be lost after reformatting the card. The security and integrity of the internal files on the G1W-H are not covered under warranty. Do not adjust settings or placement while driving. Frequently Asked Questions (FAQs) How do I unfreeze the device? Press the Menu button. Wait a few seconds to see if the device unfreezes.
