OWNER’S MANUAL 16” Stand Fan Model: SF-16D31 Version 1.0 2015 READ AND SAVE THESE INSTRUCTIONS Attention: Pictures in the IM are for reference only.
CAUTION Read Rules for Safe Operation and Instructions Carefully. WARNING 1. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safely feature. 2.
ASSEMBLY INSTRUCTION 1. Take out the base tube, three butterfly screws for fixed base and the round base from the packing carton; 2. Insert the tube to the round base, be sure to make the positioning screw align with the base; 3. Screw the three butterfly screws into the holes on the tube and tighten them; 4. Loosen the fastening knob, adjust the height of inner tube and tighten the knob. 5.
Fig.3 Fig.4 Blade Set Fig.6 Fig.7 Remote controller Battery Battery cover On/Off Drive plate OSC Fig.5 PRO/Timer Mode OPERATING INSTRUCTIONS Plug in the power adapter, after a "beep" tone, the fan is on standby. I. Remote Controller (Fig.6) “ ” ON/OFF KEY The standby mode, press this button, the fan to memory stall start. In the operation of the fan, press this button, the fan off to standby state.
“ ” OSC KEY After the fan starts, repeatedly touch this button to start or stop oscillation. “ ” PRO KEY Under power-on state, timed power-off can be set. Press the PRO button; it starts the timing power-off state. "Timing" and icon displayed on the fan display will flash once per second, the rotate the drive plate clockwise, the fan display will display 0.5 → 1.0 → ...... → 7.5 → 00 → 0.5 → ...... in cycle, rotate the drive plate counterclockwise, it cycles as 7.5 → ...... → 0.5 → 0 0 → 7.5 → .......
IV. Height Adjustment Lowing: lift up the head with a hand, unscrew the fastening knob counterclockwise with the other hand, slowly lower the head to an appropriate height, and tighten the knob clockwise. Rising: lift up the head with a hand, unscrew the fastening knob counterclockwise slowly with the other hand, rises up the head to a proper height, and tighten the knob clockwise. V. Pivoting Angle Adjustment When adjust the pivoting angle, fix the guards with hands and reverse the head of fan.
USER SERVICING INSTRUCTIONS a) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. b) Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. c) Remove fuse carefully. Insert the tip of your tool into fuse slot (close with the terminal), then prize the fuse gradually and slowly, but not overexert. If you feel tight, you can try it at several times and prize the fuse little by little.
Your Guarantee If this product is found to be faulty ass a result of faulty materials or workmanship within one year from date of purchase, it will be repaired free of charge. This guarantee is subject to the following terms: ● Sunpentown must be noti�ed of the fault. ● Proof of purchase must be presented to Sunpentown's nominated representative. The warranty will be void if the product is modi�ed, misused or repaired by an ● unauthorized person.