About this Manual Congratulations on purchasing the Coleman DV6000AF Sports & Action Camera! The contents of this manual are subject to change without notice. Note that the example screens and product illustrations shown in this User’s Guide may differ somewhat from the screens and configuration of the actual camera. Copyright This manual contains proprietary information protected by copyright. All rights are reserved.
may cause undesired operation. CE Mark Warning This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Camera Information • Do not disassemble or attempt to service the camera yourself. • Do not expose the camera to moisture, or extreme temperatures. • Allow the camera to warm up when moving from cold to warm temperatures. • Do not touch and put pressure on the camera lens.
Battery Information • Turn off the camera before installing or removing the battery. • Use only the provided batteries or type of battery and charger that came with your camera. Using other types of battery or charger may damage the device and invalidate the warranty. • Inserting the battery upside down can cause damage to the product and possibly cause an explosion. • When the camera is used for an extended period of time, it is normal for the camera body to feel warm.
resulting in camera malfunction. • The battery door must be closed securely and the lock engaged in order for the camera to be waterproof. Failure to do this can allow water to enter the camera and damage it. The camera can shoot images underwater at a depth of 3m (10ft) for up to 60 minutes. x Do not drop the camera, strike it against a hard object such as a rock, or throw it against a water surface. x Do not subject the camera to shock when using it underwater.
Notes about Opening and Closing the Battery Door x Make sure the camera and your hands are not wet. x Make sure that there are no debris inside the battery-chamber or memory card slot. x Make sure that the battery cover is firmly closed and the security lock is in the lock position. Precautions When Cleaning x Do not puncture the microphone or speaker openings with a sharp implement. x If the inside of the camera is damaged, the waterproof performance will deteriorate.
Turn the Product Off before Removing or Disconnecting the Power Source or Memory Card Do not remove the battery while the product is on, or while images are being saved or deleted. Forcibly cutting power in these circumstances could result in loss of data or cause damage to the memory card or internal circuitry. Notes about the LCD Screen x The LCD Screens are constructed with extremely high precision; At least 99.99% of pixels are effective, with no more than 0.01% being missing or defective.
completely, and may reduce battery performance. Note that the battery may become hot after use; wait for the battery to cool before charging. When charging the battery inserted into this camera using the Charging AC Adapter or a computer, the battery is not charged at battery temperature below 5°C (41°F) or above 55°C (131°F). x When the battery is between 45°C (113°F) - 55°C (131°F), the chargeable capacity may decrease.
7. x After making sure that there are no water droplets on the camera, open the battery cover and use a soft dry cloth to gently wipe off any water or sand remaining on the waterproof packing or inside the camera. If the cover is closed when the inside is wet, this could cause condensation or a malfunction. Cleaning After Using the Camera in Conditions Other than Underwater Use a blower to remove any dust or lint that adheres to the lens, monitor or camera body.
UP LED INDICATOR CHARGING INDICATOR SPEAKER DISPLAY DOWN
POWER / MODE LED INDICATOR OK / ENTER MICROSD SLOT LENS USB PORT HDMI OUTPUT
WATERPROOF CASE LATCH POWER / MODE OK / ENTER LENS UP DOWN MOUNT
Operating Guide 1. Inserting / Removing a Memory Card Ensure the camcorder is powered off. Insert a MicroSD card into the MicroSD card slot. The MicroSD card can only be inserted one way. Do not force it through. Once successfully inserted, it will click in. To remove, simply push the card in for it to pop out. 2. Inserting / Removing the Battery a. Remove the battery cover by pinching the small tab inward and pull up. b. The battery is purposely shaped so that it can be inserted only one way.
Charging the Battery Connect the included USB cable’s small end into the camcorder’s USB input, and the larger end into the AC adaptor. The LED will in red and will once the battery is fully charged. You may use the camcorder for recording or playback while it is plugged into auxiliary power (AC adaptor, computer, mobile charger). For the quickest charge, please ensure that the camcorder is powered off. Power On / Off Ensure that the battery is fully charged.
9M=&"9=$MJ-$&9 M &7AH>&MC,&M" 5&> M-AM 97M 7$M-7M M59$& :M!'*.
LED Light Color Statuses Blue LED: The camcorder is busy processing an image or video. Yellow LED: WiFi is enabled. When flashing yellow, the WiFi is waiting to connect; when solidly lit, WiFi is connected. Red LED: The battery is charging. Recording Video Once powered on, the camcorder automatically enters VIDEO mode. Press the ENTER button to begin recording. The bottom of the screen will show a flashing red dot, denoting that video is recording. Pres the ENTER button again to stop recording.
Go to Start -> My Computer -> and find the removable disk. Your camcorder acts like a card-reader when connected and can be easily accessed this way. Your media will be stored in a folder on this removable disk. Copy the folder to your computer. " " # $ #* +8< <= =+ "?? ? 13. Connecting to a Smartphone STEP 1: Download the Smartphone App To wirelessly operate the DV6000AF amcorder you will need to install the “XDV” app on your Android or iOS device.
STEP 3: App Location Settings - iOS Once connected successfully, launch the XDV app. When launching the app for the first time, you will be prompted to allow the XDV app to use your location. Select "Allow While Using App". This will allow the app to communicate with your camera and will allow the app to work properly. The app will not connect to your camera if you select "Don't Allow".
STEP 4: Operating the XDV App Your camera can now integrate with your smartphone. Upon launching the app, it will initially default to the video recording function. Follow the steps below to select modes. To change recording modes, tap the each mode icon on the at the center of the smartphone app.
Recording Videos Remotely 1. To start recording a video, tap the Video icon on your smartphone screen. While a video is recording remotely, the status indicator LED will flash 2. The Video Recording mode can be changed by selecting one of the options shown below. You can select Normal video recording, Loop Recording or Time-Lapse.
Shooting Photos Remotely 1. Switch to Photo mode by tapping the Camera icon on your smartphone screen. To capture a photo, tap the Camera icon again. 2. The Photo mode can be changed by selecting one of the options shown below. You can select Normal, Self-timer, Photo Burst or Time-Lapse.
Viewing Media on the App To view your photos and videos on the app, tap the Media icon in the bottom middle of your smartphone screen. Then select Device at the top of your screen to show the media on the camcorder. Tap the photo or video file you wish to view. To download media to your smartphone or to delete media from the camera, tap the down arrow at the top right corner of the smartphone screen. Then select Download or Delete.
and tap the confirm button on the bottom right corner of your smartphone screen. If a photo or video is deleted on the app, it will also be removed from the memory card in your camera. Note: Any media deleted is permanent and cannot be undone.
Changing Camera Settings on the App Settings can also be accessed through the app. Tap the Settings icon in the bottom right-hand corner of the screen to launch the Settings menu. From here, all of the camcorder settings can be adjusted.
14. MENU & SETTINGS INTERFACE Overview Your camcorder comes preset with some user-adjustable settings to fine tune and customize how you would like your camcorder to function. The settings are already optimized and preset for the easiest experience. Before you begin, ensure you are in SETTINGS mode. From the main screen, press the MODE button until a gear is shown on the screen. Press the ENTER button to access the settings mode. 14.
2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You can select from 4K 30FPS, 2.7K 30FPS, 1080P 60FPS, 1080P 30FPS, 720P 120FPS, 720P 60FPS, 720P 30FPS. 3. Press the OK button to confirm your selected setting. 4. Press the MODE button to exit the settings menu without making a selection. 14.1.2 Audio Recording This setting allows you to set the built-in microphone ON or OFF during a video recording.
14.1.4 Loop Recording This setting allows you to set a maximum duration for each video clip recorded. Once you select an option, your camcorder will record video clips in this time interval only. Once your selected duration recording time is reached, the camcorder will end the recording and begin recording a new video file seamlessly. 1. In SETTINGS mode, select ‘Loop Recording’ by using the UP or DOWN buttons. Press the ENTER button to enter the ‘Loop Recording’ submenu. 2.
14.2 Photo Mode Settings Overview Your camcorder comes preset with some user-adjustable settings to fine tune and customize how you would like your photos to be captured. The settings are already optimized and preset for the easiest experience. Before you begin, ensure you are in SETTINGS mode. From the main screen, press the MODE button until a gear is shown on the screen. Press the ENTER button to access the settings mode.
3. Press the OK button to confirm your selected setting. 4. Press the MODE button to exit the settings menu without making a selection. 14.2.3 Auto (Auto Capture) This feature allows you to capture a single photo at a set interval. It will continue to capture a single photo after each time interval until stopped. 1. In SETTINGS mode, select ‘Auto’ by using the UP or DOWN buttons. Press the ENTER button to enter the ‘Auto’ submenu. 2.
14.3 General Settings Overview Your camcorder comes preset with some user-adjustable settings to fine tune and customize your camcorder. The settings are already optimized and preset for the easiest experience. Before you begin, ensure you are in SETTINGS mode. From the main screen, press the MODE button until a gear is shown on the screen. Press the ENTER button to access the settings mode.
14.3.3 WiFi This option activates the WiFi connection, this allows you to control the camcorder from the app on your smartphone. 1. In SETTINGS mode, select ‘Audio Recording’ by using the UP or DOWN buttons. 2. Press the ENTER button to turn WiFi On. 3. The WiFi name and password will appear on the screen. 4. Press the UP button to exit WiFi. Connecting to WiFi and app instructions can be found in the Operating Guide section, point 13. 14.3.
buttons. Press the ENTER button to enter the ‘Light Source Frequency’ submenu. 2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You can select from Auto, 50Hz, 60Hz. The default frequency for the United States is 60Hz. 3. Press the OK button to confirm your selected setting. 4. Press the MODE button to exit the settings menu without making a selection. 14.3.7 LED Light Indicator This function allows you to turn the LED Indicator Light on and off. 1.
1. In SETTINGS mode, select ‘Auto Shutdown’ by using the UP or DOWN buttons. Press the ENTER button to enter the ‘Auto Shutdown’ submenu. 2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You can select from 1 minute, 2 minutes, 5 minutes, Close. 3. Press the OK button to confirm your selected setting 4. After the selected amount of time with input, the camcorder will power off. Press and hold the POWER button for 3 seconds to power the camcorder back on. 5.
14.4 Setup Settings Menu Overview Your camcorder comes preset with some user-adjustable settings to fine tune and customize your camcorder. The settings are already optimized and preset for the easiest experience. Before you begin, ensure you are in SETTINGS mode. From the main screen, press the MODE button until a gear is shown on the screen. Press the ENTER button to access the settings mode.
14.4.3 Format Memory Card This setting allows you to erase all video and photo files stored on your memory card. 1. In SETTINGS mode, select ‘Format’ by using the UP or DOWN buttons. Press the ENTER button to enter the ‘Format’ submenu. 2. Press the UP or DOWN buttons to navigate the submenu and select a setting. 3. Press the OK button to confirm your selected setting. You can select from Confirmation, Cancel. 4. Press the MODE button to exit the settings menu without making a selection.
CX14WP Camera Underwater Case (100 ft.
= Mount 2 Mount 1 Waterproof Housing + = Camera Waterproof Housing Handle Bar/Pole Mount Mount 3 Waterproof Housing
0 "=NvRRi a)# 2B8> %vpi0Ri #SYxTSH^PS jYbS =Riv ;Rc]pi 3SYK9^Sb!36> $jYb^[ >sKj^[ &zjO[ (SoKj *Kb^Kj 9q~YSS #O[ CK^ -KsKjSS 9qb^[ >^hsb^WSP ![^jSS ?xKP^^qjKe![_jSS /qxSKj <^Kj a X a X s X s Us s X s X s X 39 7t]piLd 0LiZLZR F]QRp;Rd]pi F]QRp%]cR%pvgL F]QRp pgtvR pi %pklL ) :\pp%`cR%pvgL 3SYK9^Sb 3S
Elite Brands Inc., 40 Wall Street, 61st Floor New York, NY 10005 www.elitebrands.com www.colemanoptics.com Coleman, , , are registered trademarks of The Coleman Company, Inc. used under license ©2022 The Coleman Company, Inc. If you’re having difficulties with your camera, or would like further assistance, please call our toll-free technical support hotline at 800-441-1100. Please be sure to have your camera handy when calling.